Used Wide Belt for sale (16,072)

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Ndodpfx Agjwka S Uszsc Equipment and technical data: Sanding width: 1100 mm Sanding belt length: 1900 mm Workpiece thickness: 3-150 mm Feed speed: infinitely variable, 2.5 - 13 m/min 1 steel contact roller 1 rubber-coated contact roller 1 sanding shoe unit: with air-cushion sanding shoe Drives: 1st sanding unit: 15 kW 2nd sanding unit: 15 kW 3rd sanding unit: 11 kW with infeed table extension with outfeed table extension Total connected load: 43 kW Extraction capacity: approx. 6750 m³/h Air velocity: 20 m/s Compressed air connection: 6-8 bar Air requirement: approx. 30 l/min Dimensions: 1750 x 2740 x 1890 mm Weight: 3100 kg Availability: short notice Location: 65439 Flörsheim

Condition: used, Year of construction: 1997, Number of belts: 2-belt Max. working width: 1100 mm Min. working height: 3 mm Max. working height: 160 mm 1st belt: Calibration roller Diameter of 1st roller: 150 mm Design of 1st roller: grooved rubber roller 90 degrees Shore Sanding belt length of 1st unit: 1900 mm Sanding belt width of 1st unit: 1120 mm Sanding belt speed of 1st unit: 18 m/sec Drive of unit 1: 11 kW 2nd belt: Sanding unit shoe Sanding shoe of 2nd unit: electronic individual links 45 mm segment width Sanding belt length of 2nd unit: 1900 mm Sanding belt width of 2nd unit: 1120 mm Sanding belt speed 2nd unit: 18 m/sec Drive of 2nd units: shared motor with 1st unit with rigid sanding pad for solid wood and frame sanding. Lacquer sanding possible: No. Fixed feed speed: 5/10 m/min. Control: Hand control panel. Electric/pneumatic belt oscillation: Yes. Table lift: Electric. Table display: Digital. Operating pressure: 6 bar. Machine number: E / 79191. Dimensions: 1930 x 1700 x 1980 mm. Motor power: 12 kW. Extraction diameter: 2 x 150. Storage location: Nattheim. Nsdpfxexq Apte Agzedc

Condition: excellent (used), CATALOG NUMBER 5799 TECHNICAL DATA - Maximum workpiece width: 230 mm - Maximum workpiece height: 140 mm - Minimum workpiece length: 300 mm - 2 sanding units: - Top and bottom + platen * Top: - 2 pressure rollers, slip type, metal - Pressure mechanism - Sanding unit: 2 metal rollers + platen - Slip-type pressure roller - Feed belt * Bottom: - Feed belt - 2 metal rollers, slip type, smooth - Pressure mechanism Njdpsfndhzefx Agzjdc - Sanding unit: 2 metal rollers + platen - 3rd metal roller, slip type, smooth - Electrically adjustable sanding height - Oscillation of sanding belts - Pneumatic belt cleaning - Infinitely variable feed speed adjustment via inverter: 3–15 m/min - Feed motors: 2 × 0.37 kW - Main motors: - Upper: 5.5 kW - Lower: approx. 5.5 kW - Air requirement: 6–8 bar - Extraction nozzle diameter: 4 × 100 mm - Overall dimensions (L/W/H): 2340 × 1420 × 1920 mm - Weight: 1480 kg – Suitable for short workpieces (belts overlap) – German-manufactured – Very good condition – Not repainted – Used sander Net price: 22,900 PLN Net price: 5,450 EUR Net price calculated at 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2019, functionality: fully functional, working width: 1,000 mm, grinding width: 1,000 mm, grinding height: 125 mm, height adjustment type: electric, type of input current: three-phase, TECHNICAL SPECIFICATIONS: - Working width: 40-1000 mm Ndsdpfx Ajxqfxkjgzjc - Minimum element length: 470 mm - Min/max pass-through height: 3-125 mm - Infinitely variable feed speed: 6-30 m/min 1. SANDING UNIT: - Spiral-milled steel contact roller, diameter 220 mm - Motor power: 22 kW / 400 V - Sanding belt speed: 19 m/s - Oscillating roller pressure system, rollers coated with vulcanized rubber, first roller equipped with anti-kickback system 2. COMBINATION UNIT WITH PAD: - Spiral rubber roller, diameter 190 mm + steel roller, diameter 100 mm - Motor: 15 kW / 400 V - Sanding belt speed: 18 m/s - Adjustable pressure pad - Pneumatic oscillation - Automatic conveyor belt tracking - PLC digital display - Pneumatic belt tensioning - Pneumatic sanding belt cleaning (both units) - CONTINUOUS FEED SYSTEM, motor power: 2.2 kW - AUTOMATIC GRINDING HEIGHT ADJUSTMENT, 0.37 kW 3. POLISHER UNIT – BRUSH at outfeed, motor power: 0.37 kW - Automatic unit braking (pneumatic brakes) - Air pressure: 8 bar - Air consumption: 0.9 m³/min - Extraction air requirement: 7,500 m³/h - Abrasive belt size (W × L): 1,030 × 2,200 mm - Exhaust air velocity: 25-30 m/s Machine dimensions: - Length: 2,265 mm - Width: 1,740 mm - Height: 2,180 mm - Weight: 3,000 kg

Condition: used, Year of construction: 2018, Wide belt sander Njdpfxewnhwaj Agzedc Boere Sandrite 1100C 380V Maximum sanding width 1100mm Maximum sanding height 150mm Sanding unit COMBI Engine 11kW (15HP) Transport dimensions:1800x1300x2100mm (LxWxH), Weight 1850kg - Year: 2018 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2025, CASADEI Libra 35 - Wide belt sanding machines in two belt version immediately available - ex stock 54634 Bitburg Ndsdpecr S Ecsfx Agzec Technical data grinding width 1100 mm Min. / max. working height 4 /170 mm Sanding belt width 1115 mm grinding belt length 1900 mm feed speeds 4,5 / 9 m/min feed motor 0,33/0,55 kW Table adjustment motor power 0,25 kW Drive motor power 11 kW Electrical voltage 400 V Phase(s) 3 Ph Mains frequency 50 Hz Length 1650 mm Width/depth 1820 mm Height 1960 mm Illustration with optional equipment Wide belt sander as double belt version up to 1100 mm with many equipment options for the price-conscious craftsman's workshop Robust tube-stiffened monoblock steel machine body with working units mounted high up for maximum rigidity User-friendly due to clear control panel on the front side Motorized table height adjustment Digital display for working height Electronically controlled sanding belt oscillation with reduced compressed air requirement Automatic star-delta start for main motor Natural rubber feed carpet with negative profile Support table with two rollers in the infeed and outfeed of the feed carpet Carpet feed via gear motor with two speeds Flexible steel pressure rail in front of the first unit Rubber pressure rollers, in front and behind each working unit Pneumatic belt tensioning for each unit with decimal correction possibility of the core/ belt strength Quality - Made in Europe Execution RTC 1. aggregate with bevelled steel roller Ø 120 mm and fine adjustment for calibration 2. aggregate combination aggregate with fine adjustable working height for calibrating and fine grinding with rubber coated roller Ø 120 mm (45 Sh) and hard grinding shoe with graphite coating on exchangeable insert Scope of delivery: Working table height adjustment with electronic display of working height. Oscillation of the sanding belts with electronic system Rubber coated grooved pressure roller at the infeed 1° position with anti-reverse device (C.E.) Star-delta start-up of the main motors Grooved steel calibration roller Selector switch for positioning the grinding shoe from the control panel Accessories: - Semi-hard flat sanding shoe - Automatic carpet centering Location: Ex stock Bitburg - at special price

Condition: used, Year of construction: 2023, Used machine Year of manufacture: 2023 Condition: Absolutely as new, machine is unused Features and technical data: 2-belt machine; 1st belt: roller, 2nd belt: platen - Usable working width: 1100 mm - Sanding belt dimensions: 1120 x 2150 mm - Maximum workpiece thickness: 160 mm - Steel calibration roller: 150 mm diameter - Width of sanding platen: 50 mm - Belt motor power: 11 kW - Belt speed: 18/16 m/s - Feed motor power: 0.55 kW - Feed belt with continuously adjustable speed via variable-speed gearbox - Feed speed: 4/20 m/min - Height adjustment motor: 0.24 kW - Mechanical belt oscillation "Eco Gear Patent System" - 1 unit drum brake for belt braking - Swivelling roller for belt tensioning - 3 pressure rollers, rubber-coated - Emergency stop bar at infeed - Electronic display of workpiece thickness - 2 roller conveyors, each with 2 rollers at infeed and outfeed - 1 extraction nozzle, 160 mm Ø - Automatic table positioning New patented belt oscillation system - No valves - No photoelectric barriers - Not sensitive to dust - Energy saving, environmentally friendly system Ndsdpfx Agew E Ty Uozjc Since 2008, this machine model with the above system has operated continuously without lateral belt run-out! Including Unitek belt motor power upgrade: 14.7 kW instead of 11 kW (Promotor) Including Unitek pneumatic sanding platen with control synchronized to feed speed Availability: Short-term Location: Saxony-Anhalt

Condition: used, Year of construction: 1986, Max. working width: 1300 mm Number of belts: 3-belt 1st unit: Shoe unit 1st roller diameter: 100 1st unit design: steel roller/shoe 2nd unit: roller/shoe 2nd roller diameter: 100 2nd unit design: steel roller 3rd unit: roller/shoe 3rd roller diameter: 100 mm 3rd roller design: grooved steel roller 3rd unit sanding shoe: electronic individual elements Cleaning brushes: Yes Paint sanding possible: Yes Belt blow-off: Yes Vacuum carpet: Yes Nodpfx Agevvki Nszedc Storage location: Nattheim

Condition: excellent (used), CATALOG NUMBER 7324 Technical specifications: - Max workpiece width: 200 mm - Max workpiece height: 190 mm 2 sanding units: - Top: metal roller + pad + metal roller - Bottom: metal roller + pad + metal roller Top side: - 2 rubber, traction pressure rollers - sanding unit - slip roller - 2 rubber, traction pressure rollers Bottom side: - sanding unit - side guide bar - electrically adjustable sanding height 0.37 kW - 6 feed speeds + right/left: 2.25; 4.5; 9; 12.5; 18; 25 m/min - feed motor: 0.6 kW - main motors: 2 x 4 kW - extraction port diameter: 80 mm, 90 mm - overall dimensions (L/W/H): 1830 x 860 x 1760 mm - weight: 630 kg – not painted – used sanding machine, in very good condition Net price: 12,500 PLN Nsdpfsvt Alwex Agzsdc Net price: 2,970 EUR (exchange rate 4.2 EUR) (Prices may change in case of significant fluctuations)

Condition: used, Year of construction: 2008, Wide belt sander Casolin Avant RRT 1100 Machine no. 9632007 Maximum sanding width 1100mm Min/max sanding height 3-150mm Sanding belt size 2150x1140mm Feed speed 6-12m/min Required extraction capacity 3500m³/h Engine 11kW 15kW, 27Amp, 380V Transport dimensions: 2000x1900x2100mm (LxWxH), Weight +/- 1350kg - Year: 2008 - Documentation available: Yes - Serial number: 9632007 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Njdpfx Agewng N Uozedc Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 1972, Bürkle long-belt sander with vacuum table and vacuum pump Ndjdpfxsv Trlao Agzsc Table size approx. 2500 mm x 800 mm Manual height adjustment Without top belt cover Belt length 7200 mm Weight approx. 900 kg Dimensions approx. L x W x H approx. 3800 x 1700 x 1600 mm Location: Arrives at the end of April at warehouse 54634 Bitburg Sold as is - no warranty - no guarantee - freight prepaid -

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Features and technical data: - Constant working height - Equipped with combination unit featuring steel contact roller and electronic CPS segmented pressure beam with 25 mm divisions - Sanding width: 1100 mm - Sanding belt length: 1900 mm - Workpiece thickness min./max.: 3 - 150 mm - Feed speed: infinitely variable, 2.5 - 13 m/min - Sanding unit: 11 kW Paint package: - Infinitely variable belt drive speed via frequency inverter - Belt air-blast device - Vacuum conveyor belt with blower Control: Ndodpjwka Snsfx Agzec - Terminal with 50 program memory slots - Simple menu guidance with plain text display - Visual indication of active elements during operation - Fully automatic PLC-controlled start sequence for all drives - Digital recording of operating hours Includes cleaning brush Roller table at infeed Roller table at outfeed Extraction capacity: 1850 m³/h Extraction connectors: 1 x 180 mm, 1 x 140 mm, 2 x 100 mm Compressed air connection: 6-8 bar Air requirement: 10 l/min Weight: 2,200 kg Availability: by arrangement Location: Röllbach

Condition: used, Year of construction: 1997, Number of belts: 1 belt, max. clearance height: 150 mm, max. working width: 1100 mm. 1st unit: Combination unit. 1st roller diameter: Steel roller. 1st unit design: Roller/shoe unit. 1st sanding shoe design: Electronic individual links. Segment width: 50 mm. 1st sanding belt length: 1900 mm. 1st sanding belt width: 1120 mm. Motor: 1 kW. Feed speed: 4 and 8 m/min. 2nd unit: Dust brush. Approx. weight: 2000 kg. Dimensions: 1800 x 1450 x 2120 mm. Njdpfx Agevvkkaozsdc Storage location: Nattheim

Condition: excellent (used), CATALOG NUMBER: 6145 TECHNICAL DATA - Maximum workpiece width: 1100 mm - Maximum workpiece height: 140 mm 3 units: 1) Calibrating grooved rubber roller – 15 kW 2) Calibrating grooved rubber roller – 11 kW Njdpfx Ajlrvi Ejgzodc 3) Calibrating grooved rubber roller – 11 kW From above: - Sliding metal roller - Sliding rubber roller - Unit - 2 sliding rubber rollers - Unit - 2 sliding rubber rollers - Unit - Sliding rubber roller From below: - Infeed table: 3600 x 1000 mm - Feed speed regulated via inverter 0.25 kW - Traction belt - 3 ejection sliding rubber rollers - Pneumatic belt oscillation with photocell control - Belt blowing - Electric table elevation adjustment – lifting motor 0.75 kW - Smooth feed speed control – feed motor 2.2 kW - With vacuum pump – pump motor 4 kW - Extraction port diameter: 110 mm, 80 mm - Operating pressure: 6-8 bar - Extraction connector diameters: 3×150 mm, 3×200 mm - Overall machine dimensions (LxWxH): 3400 x 2300 x 2800 mm - Feeder dimensions (LxWxH): 3000 x 1300 x 900 mm - Pump dimensions (LxWxH): 600 x 950 x 940 mm - Weight: approx. 5000 kg Net price: 39,900 PLN Net price: 9,500 EUR (depending on exchange rate of 4.2 EUR) (Prices may vary with greater fluctuations)

Condition: used, Year of construction: 2017, total width: 1,900 mm, total height: 2,150 mm, total length: 1,650 mm, Empty weight: 1.499 kg Price: On request - Number of units [pcs]: 1 - └ Unit 1: Nodpjwl Uffjfx Agzsdc - - Type of unit: Combi - - Sanding belt length [mm]: 2150 - - Sanding belt width [mm]: 1150 - - Motor power [kW]: 11 - Max. working width [mm]: 1100 - Min. working height [mm]: 4 - Max. working height [mm]: 170 - Year: 2017 - Documentation available: No - CE marking present: Yes - Serial number: AB00002054 - Voltage [V]: 400 - Current consumption [A]: 36 - Transport dimensions: 1650mm x 1900mm x 2150mm (l x w x h) - Transport weight [kg]: 1499kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2020, Compact wide-belt sanding machine with combination sanding unit With special offer equipment – Top condition – Special offer equipment: - Switching the sanding shoe on and off from the control panel - Switching the roller on and off from the control panel - Electronic control Fox 500 KTR - Table extension with 2 rollers for infeed and outfeed - Automatic table positioning with button control Article number: 5222100A2 Also suitable for smaller workshops for occasional use Combination sanding unit with sanding shoe for fine sanding Standard with diagonal-grooved steel roller Ø 120 mm for calibration Fine adjustment of working height Clear control panel on the front side Robust tube-reinforced monoblock steel machine body, robot-welded, with work units positioned high up for maximum rigidity Motorized table height adjustment with digital display Electronically controlled sanding belt oscillation Feed carpet driven by gear motor with two speeds Natural rubber feed belt with negative profile Flexible steel pressure rail in front of the first unit Rubber pressure rollers before and after each working unit Pneumatic belt tensioning per unit with decimal correction possible for grit/belt thickness Universally applicable for solid wood and veneer thanks to the combination unit Entry-level model for smaller companies Working width 950 mm Equipment details Combination unit for calibration and sanding Diagonal-grooved steel roller Ø 120 mm with fine height adjustment Hard sanding shoe with graphite pad Universal version for calibration and sanding of solid wood, chipboard, and veneer Technical data Length (product) approx. 1388 mm Height (product) approx. 1668 mm Width/depth (product) approx. 1545 mm Connection for extraction Extraction port diameter 140 mm Electrical data Connection voltage 400V Current type AC Phases 3Ph Line frequency 50Hz Ndodpfx Agjxac E Hezoc Feed motor power 0.33 / 0.55 kW Table height adjustment motor power 0.25 kW Drive motor power 7.5 kW Sanding unit Sanding belt length 1525 mm Max. sanding width 950 mm Sanding belt width 970 mm Feed unit Feed speed 4.5 / 9 m/min Workpiece Min. workpiece height 4 mm Max. workpiece height 170 mm Location: ex stock 54634 Bitburg - Immediately available -

Condition: excellent (used), Catalogue number 6349 TECHNICAL DATA - Max. workpiece width: 250 mm - Max. workpiece height: 110 mm 2 sanding units: top and bottom Top side: - 2 slip-feed pressure rollers - Sanding unit with 2 metal rollers + pad - Slip-feed pressure roller - Rubber feed belt – VACUM Bottom side: - Feed belt Ndjdehby R Aspfx Agzec - 2 slip-feed metal rollers - Sanding unit with 2 metal rollers + pad - 3 metal outfeed drive rollers - Paper cleaning system on upper and lower sanding units - Electrically adjustable sanding height - Oscillating sanding belts - Infinitely variable feed speed via frequency inverter - Main motors: 2 × 5.5 kW - Air requirement: 8 bar - Extraction port diameter: 4 × 100 mm - Overall dimensions (L/W/H): 1400 × 1200 × 1850/2250 mm - Weight: 1,490 kg – For short workpieces (VACUM belts) – German-made – DTR documentation available – Unpainted – Used sander, in very good condition Net price: PLN 26,900 Net price: EUR 6,400 (depending on exchange rate of 4.2 EUR) (Prices may vary in case of large fluctuations)

Condition: used, Year of construction: 2002, operating hours: 27,518 h, BOERE sanding line 'Compact' Elite Year of construction 2002 (CE) Operating hours 27518 Maximum height 150 mm Maximum width 1100 mm Elite BKKS 1100 First generator 30kW engine Second generator 18.5kW engine Third generator 15kW engine Voltage 380V, 128Amp Elite TKKS 1100 First generator 30kW engine Second generator 18.5kW engine Ndedpfewng Hmox Agzec Third generator 15kW engine Voltage 380V, 117Amp - Year: 2002 - Documentation available: No - Serial number: - Operating hours: 27518 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), CATALOG NUMBER 6582 TECHNICAL DATA - Maximum workpiece width: 920mm - Maximum workpiece height: 150mm 2 units: 1) Grooved rubber calibration roller 11kW 2) Grooved rubber calibration roller + belt air blowing 7.5kW From above: - 2 rubber feeder rollers - Unit - 2 rubber feeder rollers - Unit - 2 rubber feeder rollers From below: - 3 rubber feeder rollers - Conveyor belt - Pneumatic belt oscillation - Electric table elevation - Stepless feed speed adjustment - Working pressure: 8-10 bar - Pneumatic brake - Extraction nozzle diameter: 2 x 160mm - Overall dimensions (L/W/H): 1600 x 1460 x 2000 mm - Weight: approx. 1305kg – Made in Germany – 2 units – Used sander, very good condition Net price: 27,900 PLN Net price: 6,640 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change) Nedpfsh Huhtsx Agzjdc

Condition: excellent (used), Catalogue number 7431 TECHNICAL DATA - Max workpiece width: 950mm - Max workpiece height: 150mm Top: - Metal pressure roller - Unit (profiled rubber roller for calibration + pad shoe + metal roller) - Smooth, metal sliding roller Bottom: Nsdpfx Aeua Dvregzedc - Feed belt - Pneumatic oscillation of belts with photocells - Electric table lifting - 2 feed speeds - Main motor: 7.5 kW - Feed motor: 0.6 kW - Table lifting motor: 0.18 kW - Working pressure: 8 bar - Extraction connection diameter: 150mm - Dimensions (L/W/H): 1600x1250x2000mm - Weight: 1109 kg ADVANTAGES – German manufacturing – Additional pad shoe included – Used sander, in very good condition Net price: 23,900 PLN Net price: 5,690 EUR (at exchange rate 4.2 PLN/EUR) (Prices may change depending on exchange rate fluctuations)

Condition: excellent (used), Catalogue number: 7549 TECHNICAL DATA Max width of workpiece: 1100mm Max height of workpiece: 170mm 2 units: 1) Grooved rubber roller for calibration 2) Rubber roller + pad + metal roller – from above: Metal roller, sliding Working unit Metal roller, sliding Unit with pad Output metal roller, sliding – from below: Feed belt Pneumatic belt oscillation Electric table lifting 2 feed speeds Motor: 11kW With pneumatic brake Nedpfjvxuxmsx Agzedc Working pressure: 6-8 bar Extractor outlet diameter: 2x150mm Overall dimensions (L/W/H): 1960x1700x2000mm Weight approx.: 2000kg – German manufacture – 2 units – not repainted – Used sander, very good condition Net price: 34,900 PLN Net price: 8,300 EUR at 4.2 EUR rate (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7612 Technical data: - max. width of the processed element 1030mm - max. height of the processed element 150mm - from above: Njdpfx Asv Ubmijgzedc - metal, pressure roller - metal, pressure roller, divided - aggregate (rubber roller, grooved for calibration + shoe + metal roller) - rubber, smooth, sliding roller - from below: - input roller - pulling tape - output, sliding roller - pneumatic belt oscillation on photocells - electric table lifting - 2 types of feed speeds - main engine 11kW - brake - knob for precise adjustment of the grinding height - feed motor 0.33kW - table top lifting motor 0.12kW - working pressure 8bar - diameter of the exhaust port 150mm - dimensions length/width/height 1500x1750x2000mm - weight 965kg ADVANTAGES - German production - unpainted - used grinder, very good condition Net price: PLN 28,900 Net price: EUR 6,800 Net price calculated according to the exchange rate of PLN 4.25/EUR (in case of greater exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOGUE NUMBER 6985 TECHNICAL DATA - max. width of the processed element 300mm - height of the processed element 200mm - aggregate: grooved rubber roller + shoe + metal roller - work table 1230x440mm - belt 300x1900mm from above: Ndedpelvtm Ssfx Agzec - rubber, sliding roller - aggregate approx. 7.5kW - sliding, rubber roller from below: - pulling belt - pneumatic oscillation - 2 types of feed speed - feed motor 0.85kW - diameter of the extraction nozzle 110mm - dimensions length/width/height 1250/1000/1950mm - weight 530kg - unpainted - used grinder - very good condition good Net price: PLN 13,900 Net price: EUR 3,280 Net price calculated according to the exchange rate of PLN 4.25/EUR (in case of larger exchange rate fluctuations the price may change)

Condition: excellent (used), CATALOGUE NUMBER 6916 TECHNICAL DATA - max. width of the processed element 200mm - max. height of the processed element 150mm - 2 grinding units: upper - metal roller + shoe + metal roller lower - metal roller + shoe + metal roller from above: - metal pressure roller - grinding unit - sliding pressure roller, metal - cleaning brush - pulling belt Ndedekzkucspfx Agzsc from below: - pulling belt - 2 metal rollers, sliding, smooth - grinding unit - metal pressure roller - cleaning brush - output roller - electrically adjustable grinding height - pneumatic oscillation of grinding belts - smooth feed speed regulation - feed motors 0.55kW - main engines 2x4kW - air demand 6-8 bar - diameter of exhaust ports 3x80mm, 1x120mm - overall dimensions length/width/height 1800x2070x2000mm, - weight 1422kg - German production,- unpainted - very good condition,- used grinder Net price: PLN 25900 Net price: EUR 6100 Net price calculated according to the exchange rate of PLN 4.25/EUR (in case of larger exchange rate fluctuations the price may change)

Condition: excellent (used), Catalogue number 7790 TECHNICAL DATA - Max. workpiece width: 1100mm - Max. workpiece height: 170mm - 2 units: - rubber pressure roller 1) knurled metal calibration roller - rubber pressure roller 2) knurled rubber roller + shoe + metal roller - rubber pressure roller - Motor power for units I and II: 11kW - From below: - 3 metal sliding rollers - Feed belt - 2 metal sliding rollers - Pneumatic belt oscillation Nsdpfx Agoxpvuyszsdc - Electric and manual table lifting (for precise adjustment) - 2 feed speeds - With pneumatic brake - Working pressure: 8 bar - Extraction port diameter: 2x160mm, 4x100mm - Overall dimensions (L/W/H): 2000x1600x2100mm - Weight: 1170kg ADVANTAGES - Non-repainted - Italian manufacture - 2 units - DTR technical documentation - Used sander in very good condition Net price: 36,900 PLN Net price: 8,680 EUR based on exchange rate 4.25 EUR (Prices may change subject to higher fluctuations)