Used Scrap for sale (1,249)

Year of construction: 2016, condition: ready for operation (used), Main Drive Number of axis 3 Lsdpjw Huvtefx Agzsru Additional Equipment Extraction Unit: Included Resonator: Included Pallet Changer: Included Scrap Conveyor: Included Autofocus: Included Auto Nozzle Changer: Included This 3-axis ERMAKSAN Fibermak Momentum Gen-3 4.0 kW was manufactured in 2016. It features a 4.0 kW IPG resonator, a maximum sheet size of 3000x1500mm, and includes an extraction unit, pallet changer, scrap conveyor, autofocus, and auto nozzle changer. If you are looking to get high-quality cutting capabilities, consider the ERMAKSAN Fibermak Momentum Gen-3 machine we have for sale. Contact us for more information about this machine. Application Types Cutting

Condition: used, Year of construction: 2012, operating hours: 33,525 h, travel distance X-axis: 1,250 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 620 mm, controller manufacturer: Heidenhain iTCN 530, workpiece weight (max.): 1,000 kg, table width: 620 mm, table length: 1,350 mm, overall weight: 8,000 kg, spindle speed (min.): 15,000 rpm, tool length: 220 mm, tool diameter: 150 mm, tool weight: 7 g, CNC controller: Heidenhain iTCN530 Axes X-axis travel mm: 1.250 Y-axis travel mm: 620 Z-axis travel mm: 620 C-axis degrees: 360º (0,001º) B-axis degrees: ±115 (0,001º) Worktable Table dimensions mm: 1.350 x 620 Max. workpiece weight kg: 1.000 Spindle Spindle speed rpm: 15.000 Spindle drive power kW: 22 / 17 Spindle torque Nm: 387 / 466 Tool system Tool holder: SK 40 Tool magazine slots: 60 Max. Tool Diameter: 150 Max. Tool Length mm: 220 Max tool weight kg: 7 Tool-to-tool time s: 3 Equipment Electronic Handwheel Signal lamp Tool breakage probe Paper band filter Chip conveyor with built-in scraper RENISHAW OMP 40-2 4th and 5th axis Lehmann (ø400 x 40mm x 40kg) Cabin 54 pallet Storage Gressel (ø340 x 348mm x 89kg ) Cooling Tank capacity: 340 L High-pressure bar: 20 Machine running times Under power: 75.294 Operating Time: 33.525 Basic machine dimensions / weight Weight kg: 8.000 Ledpfexlrnbex Agzjru

Condition: good (used), Year of construction: 2011, Ref. -No.: 10598 Manufacturer: HELLER Type: MC 2000 Year of construction: 2011 Type of control: CNC Control: Siemens 840 D sl Storage location: Halberstadt Country of origin: Hermany Machine-No.: 50XXXX X-Travel: 800 mm Y-Travel: 800 mm Z-Travel: 1000 mm Work spindle torque (25% ED): 242 Nm Tool Taper: SK 40 Numbers Of Tools In Magazin: 54 Tool Piece Magazine With: 80 Pcs./pcs. Turning Speeds: 10000 RPM Lrodpfx Asxmfa Hjgzsu Drive Capacity - Spindle Motor: 17 kW High-Pressure Pump: 50 bar Speed range - main spindle: 10000 RPM Numbers Of Pallets: 2 Size Of Pallet: 630 x 500 mm Weight Of The Machine Ca.: 13000 t spindle running time: 7000 H Operating hours: 14000 H Preparation area: 4 x 90° hydraulic pressure: 200 bar Further information: - The machine has been measured - The geometry is in excellent condition - The spindle runs a little rough - Clamping towers and cutting tool holders are also included - 2 additional clamping towers - 2 replacement pallets - 2-axis servo tool changer - Scraper conveyor for dry machining - Cold light in the work area - Central cooling unit for motor spindle and control cabinet - Control unit at the workpiece setup station - NC-controlled rotary table - Clamping hydraulics The machine can be viewed under power by appointment.

Condition: ready for operation (used), Stainless steel Mixer Tumbler 300 litre mixer tumbler Lrodpfxjxpfzis Agzju Size 730 mm diameter x 700 mm deep Scrape mix arm Variable speed mix arm Capacity 300 Litres Tipping discharge by motor drive Hinged lid

Condition: excellent (used), Year of construction: 2020, operating hours: 759 h, Edgebander Akron 1130 J Year of manufacture: 2020, recently serviced - 7.1 kW, 7 bar - Edge thickness: max. 5 mm - Panel thickness: max. 50 mm - Coil material thickness: max. 3 mm - Workpiece length: min. 150 mm; Workpiece width: min. 85 mm - Feed speed: max. 9 m/min - Glue system: Granulate, lower glue pot; BIESSE glue system SP 01, quick-change glue pot - Strip magazine, spray unit - With BIESSE jointing unit RT 01 - Preheating zone, end trimming unit: 1 motor, BIESSE end trimming unit IT 01 - Flush/radius/chamfer units: 1 BIESSE fine milling unit RF 01 - Corner rounding unit: 1 motor, BIESSE corner rounding unit AR 01 - Scraper unit: profile scraper, flat scraper - Buffing unit - Nesting package: flush/radius/chamfer units, profile scraper Lredpowzycnsfx Agzeu - Execution: left-handed machine - Machine length: 4,215 mm; Weight: 1,000 kg - Total operating hours: 759.48 h; Total processed length: 46,284 m MACHINE AVAILABLE APPROX. FROM WEEK 42/2025!!

Condition: good (used), Year of construction: 2010, Fully functional Year of manufacture: 2010 Radius scraper blade Flat scraper blade Cleaning unit Jointing cutter up to 3 mm Nesting milling unit Pneumatic feed stop Polishing Ledpexqgr Ssfx Agzsru Machine no.: 200.07.011.10

Condition: excellent (used), Year of construction: 2015, Edge banding machine Hebrock F 4 with jointing, corner copying, and two scraper blades. Very well-maintained machine from a small workshop, in excellent condition. Color touch-screen interface with PLC control for easy machine operation, allowing storage of up to 10 user programs. Edge thickness for roll material approx. 0.4 – 2 mm Workpiece height approx. 10 – 40 mm Feed rate approx. 7 m/min Soundproof enclosure Extendable workpiece support Extraction connection: 1 x 140 mm Units/Features: Lredpew Sn I Ejfx Agzju - Manual pressure beam adjustment with SIKO counter - Manual infeed fence adjustment with SIKO counter - Manual edge thickness adjustment with SIKO counter - Jointing with diamond cutters, blades re-sharpened - Gluing section with automatic edge feed for roll material up to 2 mm - Glue pot with quick-change system for rapid color changes - Pressure zone with 3 rollers - End trimming saw - Combination milling unit, R2 with pneumatic adjustment between thin and thick edge - Radius scraper R2, pneumatically retractable - Corner rounding unit R2, pneumatically settable between thin and thick edge The contour milling unit can also be used for shelf processing, i.e., only the straight edge is rounded, not the corners - Glue joint scraper, pneumatically retractable Other features: - Hood locking - CE marking - Operating manual A video of the machine in operation can be provided upon request. All indexable inserts of the milling units and scrapers have been replaced or rotated; saws have been sharpened. The machine is therefore immediately ready for use. The diamond jointing cutters have also been sharpened. Paintwork touch-ups have been carried out. The machine has approx. 335 operating hours and has only processed approx. 20,700 linear meters of edging material. The machine is in very good condition; see original photos. Machine dimensions: approx. 4050 x 1100 x 1400 mm (LxWxH) Weight: approx. 800 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse. See “more offers from this provider.”

Condition: good (used), functionality: fully functional, power: 97.6 kW (132.70 HP), fuel type: diesel, overall weight: 38,730 kg, Year of construction: 2023, operating hours: 1,050 h, Mobile 3-deck screening plant | 4 fractions | Oversize discharge to the left Year of manufacture: 2023 Operating hours diesel engine: approx. 1,050h Theoretical feed capacity: up to 500 t/h Feed hopper 8 m³ with folding grate Dosing gate at feed hopper Foldable/bar grate MSW100 (radio-controlled) Feed conveyor GB= 1,200mm, smooth belt Screen box with spacer frame Currently without screen media Screen equipment available according to requirements for an additional charge Screening area upper deck: 6,100×1,550mm, cross-tensioned Screening area middle deck: 6,100x1,550mm, cross-tensioned Screening area lower deck: 5,400×1,550mm, length-tensioned Screen inclination: 20-30° Vibration amplitude adjustable: 6 – 10 mm (depending on frequency) 3 material brakes on the upper deck Fine material conveyor discharge height: up to 4,500mm (depending on screen angle) Oversize side discharge conveyor (upper deck, left): discharge height 5,000mm Middle deck side discharge conveyor (right): discharge height 5,000mm Lower deck overflow side discharge conveyor (left): discharge height 5,000mm Radio remote control for folding grate Line coupling Pneumatically assisted scraper on fine material conveyor Dust suppression system with water pump Stockpile monitoring via ultrasonic sensor Hardwired control panel for plant operation Lighting mast with 3xLED John Deere diesel engine 4045 EWS with Stage V turbocharger Power: 97.6 kW Service at 1,000 operating hours = new WITOS Fleetview Ledpfexqf Ulsx Agzoru Transport dimensions (LxWxH): 18,310×3,200×3,400mm Machine weight: 38,730 kg

Condition: good (used), Year of construction: 2003, travel distance X-axis: 850 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 530 mm, For Sale: Topper TMV-850 Vertical Machining Center (2003) Reliable and precise vertical machining center for demanding production tasks. Specifications: Spindle: BT-40, 8,000 rpm, through-spindle coolant Travel: X = 850 mm, Y = 500 mm, Z = 530 mm Table size: 950 × 500 mm, load capacity 800 kg Tool changer: 24-position automatic tool changer (ATC) Control: FANUC 0i-MC – easy to operate and widely supported 4th axis: Enables machining of complex workpieces with high accuracy Lredpfx Aexp Um Ujgzsu Chip removal: Two chip augers and a rear-mounted scraper conveyor for efficient chip handling Solid and well-maintained machine ready for immediate operation.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, LIEBHERR LC-380 (2011) – 6/7-Axis CNC Gear Hobbing Machine MARCH 2025 Service Report from LIEBHERR included in the documentation Ø 380 mm | Module up to 7 (hobbing) / 9 (profile grinding/milling) | 600 mm face width | Siemens 840D sl Very well-equipped, late 2011 model (s/n FN9014) with special filtration for non-ferrous metals. Wet or dry machining possible; includes oil/media cooler, paper band filter, extensive hobbing arbors and accessories. The machine is fully enclosed and described as being in very well-maintained condition. Equipment & Options: - Siemens 840D sl CNC with hand-held control unit (teach) - Full enclosure, table clamping - Tangential hobbing device for high accuracy - Measurement system for A-axis swivel accuracy - Device for single-track measurement/spindle approach & probing function - Programmable tailstock - Paper band filter for non-ferrous material, scraper chip conveyor - Oil cooler, English language option - Several hobbing arbors/mandrels, HSK-A50 interface - Complete set of books & manuals Technical Data: - Max. gear diameter: 380 mm - Min./Max. center distance: 15 / 400 mm - Max. axial travel: 600 mm - Max. module (hobbing): 7 - Max. module (profile gear milling): 9 - Table diameter: 320 mm | Max. table load: 18 kN - Head swivel range (FK2.2): ±35° - Main drive power: 14 kW - Max. hob speed: 1,200 min⁻¹ Ledpfx Agoxlz Nbszjru - Max. tangential travel: 300 mm - Max. tool diameter × length: 160 × 330 mm - Tailstock column axial travel: 540 mm - Interface: HSK-A50 - Electrical: 220 V / 60 Hz - Machine weight: approx. 15,000 kg - Machining: wet or dry - Serial number: FN9014, year of manufacture 2011 - Stock no.: 16634234 | Model: LC-380 Key Customer Benefits - Flexibility: Wet/dry machining + filtration suitable for non-ferrous metals → wide material range - Accuracy: Tangential hobbing & A-axis measurement device → high gear quality - Productivity: 1,200 min⁻¹ hob speed, 600 mm face width → large parts in a single setup - Process Reliability: Oil/media cooling, table clamping, full enclosure - Turnkey Package: Multiple hobbing arbors and mandrels + complete documentation

Condition: excellent (used), Year of construction: 2000, Jung Supromatic HF 50 EVO Jung Supromatic HF 50 EVO Surface Grinding Machine, year of manufacture 2000, in excellent, fully overhauled original condition. The machine comes from the technical center of a renowned German mechanical engineering company. Technical Data: Year of manufacture: 2000 Technical specifications Clamping surface (L x W in mm): 600 x 200 Maximum grinding area (L x W in mm): 600 x 250 Maximum magnet size (mm): 500 x 200 Maximum grinding wheel dimensions (mm): 225 (250) x 25 x 51 Table to spindle center distance (mm): Max. 400 Table longitudinal feed (reciprocating, m/min): 1 – 20 Creep feed (mm/min): 0 – 500 Grinding spindle drive speed (rpm): 800 – 4200 Power output kW (with creep feed): 1.6 – 2.2 Approximate machine weight: 2.0 t Accessories and Equipment: • Magnetic chuck • Coolant system • Machine feet • Grinding wheel About the machine: We offer a Jung HF 50 EVO surface grinding machine, year 2000, in excellent condition. The machine is, of course, fully functional and has only approx. 50 operating hours since its overhaul. All slides run very smoothly and evenly. Even at high speeds, the Jung operates very quietly. This newer generation of surface grinders is highly user-friendly and enables the production of surfaces with a low Rz value. Take the opportunity to inspect this machine under power on site and see its condition for yourself. Scope of overhaul: Mechanical service: • Complete mechanical overhaul • Hydraulics • Infeed mechanism • Lubrication • Cross and vertical adjustment • Grinding spindle • Wheel dresser • Repainting in new machine quality Geometric service: Lrjdpjwzmgysfx Agzeu • Guideway grinding by the manufacturer (optional) • Scraping of guideways • Column realignment, measurement, possible scraping/grinding, refitting with pressure plates, inspection and preparation of guideways • Adjusting crosshatch at spindle head • Alignment of wheel dresser • Regrinding of table and magnet • Machine acceptance according to manufacturer’s test sheet Electrical service: • Replacement of complete wiring, all limit switches and pushbuttons • Conversion of X-axis from cam switch to contactless limit switches (HF 50) • New control cabinet • RSF position display (2- or 3-axis readout) • Magnet holding force control for 24V or EP magnetic chuck Control modernization: • New auxiliary control cabinet (operator panel top right) • Thyristor control for grinding spindle drive • Manual cylindrical wheel dressing with top dresser or side dresser (for Diaform operation)

Condition: good (used), Year of construction: 2017, operating hours: 9,380 h, functionality: fully functional, machine/vehicle number: 4455, Numerically controlled machining center max. panel sizes: 4,000 x 2,300 mm Lredor E D Eaopfx Agzsu 1 Kuka KR420R3300 robot 1 Kuka KR200L140 robot 1 Kuka KRL140-3Comp robot Conveyor belt for removing the scrap metal Suction Ruwac Zone 22

Condition: used, Year of construction: 2008, Used machine Lrjdpfjxllvlsx Agzeu Year of manufacture: 2008 Condition: Function tested Equipment and technical data: Glue pot with roller End trim shears Pressure zone End trimming saw Combination milling unit Surface scraper Chassis Edge material thickness: 0.5-3 mm Min. workpiece width: 90 mm Min. workpiece thickness: 10 mm Max. workpiece thickness: 45 mm Min. workpiece length: 50 mm Edge material overhang top and bottom: 2.5 mm Edge material overhang front and rear: 10 mm Location: Hesse Availability: End of November/beginning of December 2025

Condition: refurbished (used), Year of construction: 2024, Saw blade solid carbide / HSS: max. 425 mm Drive power: - Two-stage with chain: 1.7/2.6 kW, - Two-stage with belt pulley: 3.7/4.5 kW Cutting speed saw blade (400 mm): - two-stage with chain: 10/20 m/min, 13/26 m/min, 15/30 m/min - two-stage with belt pulley: 20/40 m/min, 30/60 m/min Infinitely variable saw speed control fully electronic Working range square 90° max.:120 x 120 mm 45° max: Working range flat: 90° max.:230 x 80 mm 45° max: Working range round: 90° max.: 140 mm Ledpfsuiy Sbex Agzsru 45° max: Feed length single stroke:5-2000 mm Multiple stroke:5-9999 mm Feed speed AC servo max.: 500 mm/s Weight approx.:3600 kg Dimensions LxWxH:3500mm x 1300mm x 2100mm Installation area LxW: 3500mm x 1300mm Technical description Kaltenbach KKS 401/ KKS 451 NA 2000 Retrofit Kaltenbach KKS 401/ KKS 451 Retrofit High-performance automatic saw for steel. Thanks to its equipment and design, the machine can be used very efficiently for a wide range of applications. The HMI interface for controlling the machine ensures simple and trouble-free operation of the system. Due to the design of the sawing system, it is possible to realize a very precise length tolerance. The machine is generally overhauled in our company at the customer's request. Among other things, the following points will be renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operating panel - Replacement of the ball screw - Replacement of servo motor and servo inverter - Replacement of the frequency converter for the main saw drive - New electronic components - Maintenance or replacement of all hydraulic cylinders and valve terminals - Optimization and overhaul of the cooling system - Replacement of general wear parts - Overhaul of the machine body The machine also features - Fully automatic feed - Fully automatic miter adjustment +/- 60° Warranty: Unless otherwise agreed, we guarantee our machines for 6 months on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the guarantee. Optional: - Scraper - Chain magazine for 6m materials - Removal gripper system for sorting the cut-off pieces - Removal gripper system for sorting the cut-off pieces and realizing a multiple recut at the end of the workpiece - Delivery and installation on your premises - Training of your employees

Condition: ready for operation (used), Year of construction: 2005, operating hours: 69,995 h, Control Unit Brand HEIDENHAIN TNC 530 Main Drive Number of axis 3 Movement X-Axis Movement 885 mm Y-Axis Movement 600 mm Z-Axis Movement 600 mm Ledpfxexn U Ddj Agzjru Table Table load 600 kg This 3-axis DECKEL MAHO DMC 75 V Linear was manufactured in 2005. It features a travel range of 885 x 600 x 600 mm and a maximum feed speed of 90 m/min. The machine includes a high-capacity coolant system and an efficient scraper belt conveyor for swarf disposal. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMC 75 V machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 1998, functionality: fully functional, For sale: Coil metal decoiling, slitting, and recoiling line Condition: used, connected – available for live demonstration. Designed for coil metal decoiling, precise slitting into narrower strips, and recoiling into smaller coils. Technical specifications: Year of manufacture: 1998 Made in: Poland Max. metal width: 1250 mm Knife pairs: 5 Lrodpfx Ajxlcp Nogzou Longitudinal slitting, steel: min 0.4 mm / max 1.2 mm Film application function Scrap cutting guillotine Line includes: Decoiler 5 T Recoiler 5 T Multi-knife disc shears Braking and separating segment Turnstile with separator Control panel Purpose: The line is intended for preparation of coil metal for further processing: decoiling, precise longitudinal slitting, recoiling into smaller coils. If you have further questions – we will be happy to assist you.

Condition: reconditioned (used), Year of construction: 2011, operating hours: 118,024 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 750 mm, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece weight (max.): 2,000 kg, table load: 2,000 kg, rotary table diameter: 800 mm, overall weight: 21,500 kg, spindle speed (min.): 18,000 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 51,967 h, coolant supply: 80 bar, number of spindles: 1, number of slots in tool magazine: 60, input voltage: 400 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, - Year of manufacture 2011, Heidenhain iTNC530 - Machine ON hours: 118,024 h - Spindle ON hours: 51,967 h, new spindle installed at 28,826 h - HSK-A 63, 18,000 rpm - Swivel rotary table Ø 800 mm - 60 tool positions - Additional magazine ZM41 - ICS 80 bar with Vario Valve - Scraper belt conveyor - Heidenhain touch probe - Handwheel - Coolant wash-down gun - External blow air - Internal blow air - Sealing air for glass scales - Option BLUM A2 tool breakage / measurement - Kinematics-Opt - Automatic cabin door - Automatic cabin roof - Additional magazine ZM41 - Oil mist extraction incl. post-filter - Laminated safety glass window - Machine monitoring system - Option BDE (production data acquisition) - Pallet changer PW2000 - Includes 3 pallets 800x1000 mm and mounted zero-point clamping system (AMF) as well as flexible table plates - 3-pallet operation possible - Total installation area: either 12 x 5.5 m or 10 x 7 m The machine has been thoroughly cleaned and fully inspected! Geometry protocol and circularity test measurements are available at any time. The machine is standing in our facility and can be powered up for inspection and testing at any time, even at short notice. Within Germany, we are happy to offer transportation and commissioning services. Lrsdpfow Hbwkox Agzeu Before purchasing any used Hermle machine, you should talk to us. Note: Machine is immediately available. We guarantee perfect functionality and will commission the machine on-site at your facility if desired.

Condition: used, Year of construction: 2015, total length: 5,700 mm, total height: 1,900 mm, total width: 1,000 mm, Price: On request - Number of units [pcs]: 8 - 1st unit type: Pre-milling unit - 2nd unit type: Glue unit - 3rd unit type: Cap unit - 4th unit type: Rough milling unit - 5th unit type: Corner rounding unit - 6th unit type: Radius scraping unit - 7th unit type: Flat scraping unit - 8th unit type: Brushing unit - Tools available: Yes - Min. edge band thickness [mm]: 0.4 - Max. edge band thickness [mm]: 12 - Edge band height [mm]: 65 - Min. panel thickness [mm]: 8 - Max. panel thickness [mm]: 60 - Min. panel width [mm]: 70 - Year: 2015 - Documentation available: No - CE marking present: Yes - Serial number: - Transport dimensions: 5700mm x 1000mm x 1900mm (l x w x h) - Transport packages [pcs.]: 3 Lrodpfew Eafwsx Agzeu Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2015, Used machine Year of manufacture: 2015 Equipment and technical data: - Base machine with manual pressure bridge adjustment - Extendable workpiece support - Joint milling unit FG 201 with 2 milling heads - Edge feeding with single infeed, automatic transport of roll and strip material - Glue application system Glu Jet GJ 301, automatic glue height adjustment (sensing nozzle) - Pressing unit 1912-3 pneumatic - Pneumatic trimming unit 1918 (60 mm) - Extraction hoods for trimming unit - Multifunction milling unit FR 201 - Corner copying unit 1832 for up to 3 mm edge thickness - Scraper unit 1929 - Chip collection box - Flat scraper 1964 - Buffing unit 1940 - Complete spray device 1856 Lrsdexllvrepfx Agzou Minimum workpiece length: 160 mm Workpiece thickness: 60 mm Edge thickness: 0.4-6 mm Feed rate: 10 m / min Overall length: 4630 mm Weight: 1250 kg The extraction bridge shown in the pictures is not included in the scope of delivery! Location: Hesse Availability: approx. December 2025

Condition: good (used), Year of construction: 2008, Quaser MV 154 PL, Heidenhain iTNC 530 control, Year of manufacture 2008, X/Y/Z travel 1000/530/560 mm, 30-station tool changer, SK 40 tool holder, Through-spindle air blast, 20 bar internal coolant supply, External cooling, Scraper-belt chip conveyor, 3D measuring probe, Infrared receiver, Temperature-controlled oil cooling system, Thermocompensation, Spindle replacement 2021 Lrjdpfowlffpex Agzeu

Condition: ready for operation (used), Year of construction: 2008, Control Unit Brand MAKINO Model Pro5 Main Drive Number of axis 4 Lrsdpfsw Sprxjx Agzju Table Table load 1200 kg Tools Max weight 20 kg Max tool diameter 100 mm Max tool length 690 mm Additional Equipment Spindle cooling Tank system with Knoll compact band filter, 3200 liters Coolant supply through the spindle Oil mist extraction Scraper belt conveyor Conversion kit for stand-alone operation (currently used as a system machine) This 4-axis Makino a81 horizontal machining center was manufactured in 2008. It offers robust capabilities for precision machining. Consider the opportunity to buy this Makino a81 horizontal machining center. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2020, Used machine Year of manufacture: 2020 Equipment and technical data: Working dimensions Workpiece thickness: 8–60 mm Workpiece width: from 70 mm Edge height: up to 8 mm Lrjdpjxizulefx Agzju Edge thickness for roll material: up to 3 mm Feed Speed adjustable from 8 to 14 m/min, stepless regulation Gluing technology Glue system for granulate Glue pot located above the feed Interchangeable pot HOMAG QA 65 N Designed for EVA and PUR processing Quick-change function Units Jointing milling unit Pre-heating zone Pressure station, NC-controlled Front and end trimming with two motors Station for flush, radius, and bevel processing Corner rounding unit with two motors Scraper blades: profile and flat scraper Buffing unit Additional equipment and operator features Integrated spraying device Air cushion table for workpiece support PU pressure rollers Mechanical infeed barrier HOMAG powerTouch operator interface Right-hand machine version CE-compliant Dimensions: approx. 6,060 x 950 x 1,150 mm Weight: approx. 2,200 kg Availability: approx. December 2025 Location: North Rhine-Westphalia (NRW)

Condition: good (used), Year of construction: 2008, Quaser MV 154 PL, Heidenhain iTNC 530 control, Year of manufacture 2008, Travel X/Y/Z 1000/530/560 mm, 30-position tool changer, SK 40 tool holder, Blow air through the spindle, Internal coolant 20 bar, External coolant, Lsdsw Uf Nfepfx Agzsru Scraper belt chip conveyor, 3D probe, Tsc Aldaswlffpsbsb infrared receiver, Temperature-controlled oil cooling system, Thermal compensation, Spindle replaced in 2021,

Condition: good (used), Year of construction: 2004, travel distance X-axis: 6,000 mm, travel distance Y-axis: 630 mm, Chiron Mill 6000 / 2013, completely overhauled by Chiron. Year of manufacture: 2004 / overhauled in 2013. Equipped with Siemens 840D control system. Travel X/Y: 6000/630 mm. Pendulum machining possible. 92-position tool changer. HSK-A 63 tool holder. Spindle speed up to 12,000 rpm. Spindle replaced in 2021. NC swivel milling head. Hydraulic unit with 210 bar. 2 hydraulic clamping circuits. Separate clamping pressure control per pendulum field. Clamping pressure monitoring. Pneumatic workpiece stop. 2 separately controllable pneumatic lifting devices. Brankamp collision monitoring system. Scraper belt conveyor. OKZ prepared. Knoll vacuum rotation filter. Rotating viewing window. Automatic loading doors. 5-axis milling package. IKZ 70 bar (internal coolant supply at 70 bar). Oil mist extraction. Pendulum machining possible. Pendulum machining X-axis travel: 1773 mm with face machining (tool length: 120 mm). Linear clamping system with 8 vices. Lodpfew N Nvfex Agzeru

Condition: good (used), Year of construction: 2012, Bridgeport XR 760 machine 2, Year of manufacture 2012, Heidenhain iTNC 530 control system, travel X/Y/Z 760/610/610 mm, tool changer 30 times, SK 40 holder, Spindle speed up to 12,000 rpm, Air blast through the spindle, Lrsdpfx Aew Uf Ibegzsu IKZ 20 bar, Table clamping surface 1000 x 600 mm, max. table load 700 kg, Scraper belt chip conveyor, 3 D measuring probe, toolsetter, infrared receiver, cooler, thermal compensation, spindle replacement 07/2023