Used Filtration Device for sale (13,441)

Condition: used, AR Filtration ARNO-2VF-YA & PRF-K23 Filtration Units. Country of Origin: Italy Ndodjxnl Awopfx Agzjc Location: This lot is located in Bornago, Italy.

Condition: good (used), Year of construction: 1999, The filtration system is used to filter oil (rapeseed, sunflower, soybean oilseeds and others). The system is made to work automatically, it has a command unit that manages the pneumatic valves, and with the help of sensors it controls and manages the work. The system includes a control unit, a piping system with fittings and valves, and a SS filter body. Ndjdpfx Agstxc Hpozjc Automatization is completely new and never used!

Condition: used, Year of construction: 2020, operating hours: 500 h, functionality: fully functional, machine/vehicle number: DSF-1020 SS, TIMEX Filtration System: TIMEX DSF 1020 SS Drum Stripper Filter Filter Model: TIMEX DSF 1020 SS Drum Stripper Filter Filter Type: Frame Type Flange Standard: EN 1092-1 (DIN2576) PN10 Application: N/A Service Fluid: N/A Capacity: 30 m3 /h Quantity: 1 Unit Inlet TSS N/A Filtration Degree: 2000 µ Filtration Area: 6 m² Drum Diameter / Length: Ø1000 mm / L: 2000 mm Inlet & Outlet Connections: DN150, PN6 Flanged Drain Connection: DN50, PN6 Flanged Working Pressure Min/Max: by Gravity Max. Operation Temp: 55oC Operation Temp: N/A Gearbox Motor Power: 1.1 kW* Ndedpfx Agorf U Enezsc Required Voltage: 400 V AC / 50 Hz / 3Phz Filter Body / Pipe / Flange Material: SS316L Stainless Steel Filter Screen Material: SS316L Stainless Steel Cleaning Mechanism: Compressed Air + Water Accessories * Control Board (Std.)

Condition: used, functionality: fully functional, Total flow of clarified water through PF 1 – 5 or PF 6 – 9 is 400 m³/h. Filter diameter: 3,000 mm Filter media - type PR 1 – 1.6 - Grain size: 1 – 1.6 mm - Bed height: 1,100 mm Operation: Maximum filter capacity: 100 m³/h Filtration rate: 14.3 m/h Backwashing: Backwash water flow: 70 m³/h Upflow velocity: 10 m/h Backwash air flow: 385 Nm³/h Ndodpfsxcnauox Agzoc The PF units are divided into two sections: PF1-5 (old installation) and PF6-9 (new installation). Only one section operates at a time according to operational requirements. The overall workload is approximately balanced, so each section runs about 4,400 hours annually. The sand filters are regularly backwashed after each operational cycle (80 hours) or when the pressure loss reaches ΔP 25 kPa. The system is fully operational. PF Reconstruction: PF1-5: 10.11.2015 – complete replacement of sand, nozzles, and shell surface maintenance PF6-9: 13.7.2018 – complete replacement of sand, nozzles, and shell surface maintenance.

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, filter area: 65 m², volume flow: 6,574 m³/h, Complete unit: cyclone on feet + fan + rotary valve + piping + electrical cabinet. Treated air flow: 6,574 m3/H Filter surface: 65 m2 Ndedovdtxcopfx Agzsc Filter media: Antistatic polyester 550 g/m2 + oleo/Hydro OWR treatment New equipment, never assembled, new price 35 K€.

Condition: good (used), Year of construction: 2014, functionality: fully functional, volume flow: 1,000 m³/h, total width: 1,020 mm, total length: 1,680 mm, total height: 2,460 mm, overall weight: 1,540 kg, operating pressure: 10 bar, input voltage: 400 V, power: 14.2 kW (19.31 HP), 1 heat-regenerating compressed air adsorption dryer. The dryer was in use from 2014 to 2017. The system has been out of operation since 2017. The compressed air came from an oil-free Atlas Copco ZR3 compressor with 132 kW. Manufacturer: Donaldson Filtration Deutschland GmbH Type: HRS 1000 Year of construction: 2014 Volume flow at 7 bar: 1000 m³/h (16.66 m³/min) Connection: DN 80 Installed power: 14.2 kW Dimensions length / width / height: 1680mm / 1020mm / 2460mm Weight: 1540 kg Desiccant bottom (20 cm): 3 mm activated aluminum oxide Desiccant middle (40 cm): 2 mm activated aluminum oxide Top desiccant (rest up to the top) silica gel as a ball. The desiccant is already disassembled and immediately available. The desiccant was sucked out of the container with a vacuum cleaner and packed separately in airtight bags. The desiccant is still in a usable condition. It is not oily or soiled. There is the possibility of external re-drying. The TÜV has inspected the inside of the containers and an expert opinion is currently being prepared. "Loose adhesion on the lower part of the dished end" (pictures to follow) Ndodpfor A El Ejx Agzoc

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: MY2002/018, Y2002/034, The compact FOBA M1000 laser workstation is designed for high-quality laser marking of small components, medium-sized workpieces, and small production runs. In addition to the automotive industry and the metal, tool, and mechanical engineering sectors, this small and mobile universal marking machine is particularly suitable for medical technology, plastics processing industries, and contract laser marking (e.g., promotional items). The M1000 enables both small metallic and plastic components and series to be marked efficiently and with high-quality results. Operating in laser class 1, the marking station features a programmable Z-axis, a small work table, and a smooth manual or optionally electrically operated lift door that provides access to the interior from three sides. To cover a wide range of applications, various fiber laser markers can be integrated. Main application areas: Automotive and automotive supply industry, tool and mold making, mechanical engineering, medical technology, plastics processing industries, contract laser marking (e.g., promotional items). Nsdpfew Npfgjx Agzjdc The M-Series comprises advanced manual workstations for precise and economical laser marking of small to large and geometrically complex workpieces, as well as batches and small production runs. Two housing sizes (M2000 and M3000) and three models each (B: with work table; R: with rotary table; P: with X/Y/Z axis) are available. Modern fiber and UV lasers can be integrated, as well as camera systems for marking alignment, mark inspection, and code reading. The highly productive R models: motorized Z-axis, 2-station rotary table; ideal for marking a variety of serial parts (e.g., automotive interior components, metal parts, tools, medical products such as implants or instruments). Main application areas: Automotive and automotive supply industry, tool and mold making, mechanical engineering, medical technology, plastics processing industries.

Condition: used, Year of construction: 2007, Serial number: H1xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21639 Nsdpfx Agjxq Dt Hozedc Specifications:• Not certified• Winch• Previously mounted on a boat• 1,680 kg• Needs service before use Description:The crane has been standing for several years. It was functional when purchased.Service and maintenance should be expected before use.Was intended to be used as a quay crane. Own weight: 1680 Model: Heila HMR12-1S kran med vinsj (stått på båt)

Condition: good (used), Year of construction: 1999, PCI -NF MEMBRANE FILTRATION PLANT Item: M-2199-PCI-NF Plant This plant is membrane filtration plant used for remove water and / or very low molecular weight substances from liquid dairy products. The low molecular weight substances that are typically removed with NF membranes are monovalent ions such as K ions and Na ions. With APV Rannie-High Press Pump Good condition, Not used last two years!. Year of Production: 1999. Dimension: L 4.000 MM W 1200 mm Ndedpfx Agjhqhw Iezjc H 1900 mm Press: Medium pressure 20 bar Retentat flow: 1200 l/h

Condition: excellent (used), 1.0 pcs. dosing unit (two components can be dosed) Manufacturer: MOVACOLOR Type: The Balance Ndsdpfexqzkpjx Agzsc There are 3.0 pcs. dosing units available.

Condition: good (used), Year of construction: 2016, Rosenmund pressure filter, 7 m², 316SS, extensive overhaul 2016, including segmented AGP outlet valve, screen segments, variable speed drive, hydraulic power pack, dry gas mechanical seal, mixer: RPM: 16–1460. P=15 kW. Year of construction 2016. Alloy: 316SS. Nodov Rn S Djpfx Agzjdc

Condition: good (used), Year of construction: 2014, machine/vehicle number: 412, space requirement width: 1,500 mm, space requirement length: 3,300 mm, space requirement height: 2,500 mm, Ultrafiltration system with accessories for the treatment of soil washing wastewater Ndedoqzx Dbjpfx Agzec Year of construction 2014, fully functional until dismantling Documentation, operating instructions, E-plans are available. 7 packages; Filtration tank single 1520mm diameter Filtration system with control 330cm x 150cm x 220cm 5 extra Euro pallets with accessories

Condition: good (used), Year of construction: 2019, Volume measuring device including weight detection for master data acquisition, Bosche – used - : Price ex location: €8,500 (net)! Manufacturer: Bosche Weighing Technology Type: zippcube Should be size M Serial no.: Z201900158 Year of manufacture: should be 2019 Max. 50 kg 16-20 V/DC Scale net weight: 110 kg With display HMI 12 Combined volume and weight capture in a single pass Ideal for master data acquisition with space requirement measurement Original price: approx. €20,000 (net) zippcube M | Volume and weight detection up to 50 kg. Robust design, precise load cells, and intuitive software for efficient logistics. Condition: good Available: immediately Location: Biberach Nsdpexqffdjfx Agzedc

Condition: used, Year of construction: 2015, Serial number: 15037991278R / 1407713xxxx Please contact ATS Norway for more information Please provide reference number upon request: 18748 Specifications: - 2015 model - Type: SEHK300 - Slightly used - Remote control with bluetooth - Lifting capacity: 30,000 - Ready for delivery Description: 2015 Suxxesion pipe spreader in good condition. Ndsdpovgyd Rsfx Agzec Flies with a number of pipes and extra equipment (see pictures). Ready for delivery.   Own weight: 1 Model: SEHK300 rørløfter

Condition: good (used), age unknown imprinting unit numbering device Njdpeq D Aaxsfx Agzsdc suitable for GTO 46 4 numbering boxes, 7 digits, forward Delivery time: immediately from stock

Condition: good (used), PLC control, central module, RAM, CPU, central device, central unit, compact device, compact CPU Ndjdpfx Ajtxkryogzoc -Manufacturer: Siemens, Simatic S7-200 CPU 222 compact device -Type: 6ES7 216-2AD22-0XB0-Digital output: Spare part type 6ES 221-1BF22-0XA0 2 pieces. -Number: 1x module available -Dimensions: 290/80/H60 mm -Weight: 0.7 kg

Condition: good (used), Alloy: 316 SS Njdpev Rpbmefx Agzjdc

Condition: used, Year of construction: 2017, functionality: fully functional, The Jaeckel model T6 FGR K1 turning device is a versatile and reliable solution for the efficient reshaping and processing of workpieces. It is characterized by its precise control and robust construction, ensuring high accuracy and durability. The device can be easily integrated into existing production processes and allows for quick retooling as well as flexible applications. Ndjdpfxswrdt Se Agzjc

Condition: used, Year of construction: 1999, Please contact ATS Norway for more information Please provide reference number upon request: 21130 Specifications: Year of manufacture: 1999 Capacity: 13 t/m Crane diagram Grab included New control console Very little use Nsdpfx Agsw Rah Ijzodc Description: Palfinger 13 t/m crane from 1999.Comes with grab. Equipped with a new control console and has seen very little use.Has been in storage for several years, so some refurbishment should be expected.Ready for delivery. Own weight: 111 Model: PK 13000

Condition: good (used), Year of construction: 2007, age 2007 banding device computer control with digital display mobile sub-frame Delivery time: immediately Ndjdpswagr Tjfx Agzoc

Condition: good (used), PLC control, central module, RAM, CPU, central device, central unit, compact device, compact CPU, processor, Microbox PC -Manufacturer: Siemens, Simatic Microbox PC Simatic IPC427C -Type: 6ES7647-7BJ30-3XM0 Njdpfx Agsuuu Ezezsdc -Dimensions: 320/165/H70 mm -Weight: 2.7 kg

Condition: used, Year of construction: 2016, Serial number: 50xxxx Please contact ATS Norway for more information Please provide reference number upon request: 18254 Description: Solid Gantry crane from 2016 , previously used in railway projects.Equipped with four hooks , each with a lifting capacity of 10 tons , and designed for precise and heavy handling. The crane is delivered fully loaded on a truck , ready for transport.Shipping costs apply.Ready for delivery at short notice. Ndedpfx Agsvg Nx Djzec Own weight: 115000

Condition: good (used), Year of construction: 2010, max. size 23 x 32 cm age 2010 banding device cross strapping computer control with monitor for paper and film band max. pile height 30 cm Nedpfxeu S Agtj Agzjdc mobile sub-frame Delivery time: immediately

Condition: used, Year of construction: 2016, Serial number: 50xxxx Please contact ATS Norway for more information Please provide reference number upon request: 18255 Specifications Gantry crane: Model year: 2016 Type: Gantry crane for railway Njdpfovg Rkhox Agzedc Rail type: A100 Height to main hook: 11.9 metres Lifting capacity: 4 x 10 tons Total weight: approximately 131,865 kg Span length: 5.5 + 31 + 8 meters Delivery: Ready for delivery at short notice Description: Powerful Gantry crane from 2016 , previously used in a railway context, for sale.The crane has four hooks with a capacity of 10 tons each , and is ideal for heavy lifting and precise handling of large items. The crane is delivered fully loaded on a truck , ready for transport. Shipping costs are additional.Can be delivered quickly by arrangement. Total Weight: 131865

Condition: used, Year of construction: 2021, operating hours: 177 h, Please contact ATS Norway for more information Please provide reference number upon request: 19184 Specifications: - Hours: 177 - 90 km - 8-wheel drive? - Good tires - Automatic box - With front screen - Lots of extra light - Radio/Cd - Climate/ac - Diesel - With belts Worl Power Er-180 000L-8 crane 180 t/m from 2016   Ndedpjvg At Iofx Agzsc Superstructure: - Supportlegs - Extra light - Quick attach - Reversing camera - Central grease Hours: 177