Condition: ready for operation (used), functionality: fully functional, clamping force: 800 kN, clearance between the columns: 1,200 mm, ARBURG 1200 T 800-150 Hfjdpfx Afjx Af S Uotjr MACHINE DETAILS Operating Hours Machine Cycles: 2,426,431 Pump Operating Hours: 38,226 h Automatic Operation Hours: 30,517 h FTP ATR-25 Q MACHINE DETAILS Weight: 1,400 kg Note: Further information regarding the machine configuration can be found in the attached document.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 133404-100, clamping force: 3,000 kN, screw diameter: 55 mm, injection pressure: 2,040 bar, injection weight: 600 g, TECHNICAL DETAILS Clamping Unit Hedpfxjx A Df Tj Aftofr Clamping force: 3,000 kN Platen size (H x W): 1,020 x 1,030 mm Tie bar spacing (H x W): 710 x 610 mm Minimum mould height: 375 mm Maximum mould height: 375 mm Maximum opening stroke: 1,150 mm Injection Unit Screw diameter: 55 mm Shot volume: 653 cm³ Shot weight: 600 g Injection pressure: 2,040 bar MACHINE DETAILS Weight: 12,200 kg

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, product height (max.): 380 mm, workpiece diameter (max.): 130 mm, production capacity: 7,200 unit/h, TECHNICAL DETAILS Number of cavities: 6 Capacity with standard bottles: up to 7,200 bph Product formats Bottle volume: 0.25 – 3.0 L Max. bottle height: 380 mm Max. bottle diameter: 130 mm Preform dimensions Max. preform length: 210 mm Neck inner diameter: 34 mm MACHINE DETAILS Dimensions & Weight Blow module dimensions: 2,000 x 2,200 x 2,200 mm Blow module weight: 8,000 kg Hfodpfx Afsx A Uu Eetor Oven dimensions: 3,000 x 1,100 x 2,100 mm Oven weight: 2,000 kg Control cabinet dimensions: 1,500 x 1,000 x 2,100 mm Control cabinet weight: 1,000 kg Transformer 415V / 380V dimensions: 1,000 x 500 x 2,000 mm Transformer weight: 500 kg Preform hopper and conveyor dimensions: 3,000 x 1,500 x 3,500 mm Preform hopper and conveyor weight: 600 kg Preform feeder dimensions: 2,000 x 2,500 mm Preform feeder weight: 250 kg Infeed guide rail length: 2,000 mm Power supply Total power: 142 kW Mains connection: 380/420 V +/- 10%, 50 Hz +/- 1% Cooling water Cooling capacity: 16,000 kcal/h Water temperature: 10 – 12°C Flow rate: up to 6.0 m³/h Water pressure: 5 – 6 bar Compressed air Service air pressure: 7 bar Service air flow: 50 – 100 Nm³/h Blowing air pressure: up to 35 bar Blowing air flow for 0.25 – 3.0 L: 155 – 770 Nm³/h EQUIPMENT Transformer 415V / 380V Preform hopper and conveyor Preform feeder Infeed guides Adaptation to other voltages possible

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 130 mm, displacement volume: 6,172 cm³, injection pressure: 1.296 bar, plate width: 1,700 mm, plate height: 1,704 mm, TECHNICAL DETAILS Clamping force: 6,500 kN Tool opening force, max.: 346 kN Moving platen opening force: 169 kN Moving platen closing force: 144 kN Clamping plate (h x v): 1,704 x 1,700 mm Clear width (h x v): 930 x 930 mm Tool opening stroke: 1,150 mm Tool installation height, min.: 600 mm Opening width: 1,750 mm Ejector stroke: 250 mm Hfedjx Dbtwepfx Aftsr Ejector force forward/backward: 226 kN Injection unit Screw diameter: 130 mm L/D ratio: 20 Injection pressure: 1,296 bar Displacement: 6,172 cc Shot weight (PS): 5,617 g Injection flow: 1,540 cc/s Screw speed: 138 rpm Plasticizing flow: 238 g/s Nozzle contact force: 246 kN Electrohydraulic equipment Nominal pump motor power: 132 kW Installed heating power: 70 kW Cylinder heating control zones: 7 MACHINE DETAILS Space requirement approx.: 12.00 x 2.80 x 2.70 m Total weight: 43,000 kg EQUIPMENT - Oscillating elements - 1 x air valve - 2 x hydraulic core pull on BFAP - 2 x hydraulic core pull on FFAP - 8 x hot runner control points - Robot interface according to Euromap 67

Year of construction: 2014, operating hours: 78,610 h, condition: ready for operation (used), This Netstal EVOS 5500-2900 Speed was manufactured in 2014. Ideal for high-speed plastic processing, it ensures efficient operations with its robust design. If you are looking to get high quality injection molding capabilities consider the Netstal EVOS 5500-2900 machine we have for sale. Contact us for more information. Hjdpox D N H Sofx Aftefr Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Manufacturer Kiefel Model KMD 60B Year 2012 Condition Used Stock Number 00034 Approx hours 26000 Delivery date Immediately Stations Three Max tool dimensions TBC Maximum Mould Surface 580 x 440 mm Minimum Mould Surface 260 x 250 mm Depth of draw 120 mm +/- Hedjx Ekcaepfx Aftsfr Max film width 630 mm Max dry cycles / min 70 Operating pressure 6 bar Approx Dimensions TBC Approx Weight 10,000 kg Notes All details are subject to change and/or errors.All equipment is subject to availability and/or prior sale.

Condition: good (used), - 10 stainless steel silos - Brand: AZO - Previously used for: PVC powder - Condition: The silos have always been stored indoors and are in very good condition. Hfsdpfx Aex E U Hcsfter Technical details: • Capacity: 12 metric tons / approximately 7.2 m³ • Each silo equipped with vibrating discharge base • Each silo equipped with discharge valve (rotary valve) • Provided with pneumatic conveying pipe Price per silo: €4,750 Ex Works, Rotterdam region Payment terms: 100% prepayment before delivery The silos are offered as is, where is, loaded onto truck Single unit purchase possible Available while stocks last The silos will be professionally dismantled by Plastima Used Machinery and partner; after dismantling, they will be ready for collection for your own transport or we can arrange shipping on behalf of Forbo. Collection/shipping can be scheduled between January 12, 2026 and February 16, 2026. If you would like to inspect the silos, we would be pleased to arrange an appointment with you.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 112,163 h, functionality: fully functional, clamping force: 2,700 kN, screw diameter: 55 mm, injection pressure: 2,040 bar, ejector stroke: 200 mm, TECHNICAL DETAILS Clamping unit Clamping force: 2,700 kN Platen size (H x W): 1,030 x 1,020 mm Tie bar spacing (H x W): 710 x 630 mm Min./max. mould height: 350 mm Max. opening stroke: 1,150 mm Locating ring diameter: 160 mm Ejector stroke: 200 mm Injection unit Screw diameter: 55 mm Shot volume: 650 cm³ Shot weight: 565 g Injection pressure: 2,040 bar Max. injection speed: 144 mm/s MACHINE DETAILS Operating hours: 112,163 h Hfedpfsx A Dbbex Aftjr EQUIPMENT Pneumatic valve Core pulls (3 pcs.)

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, clamping force: 3,188 kN, injection weight: 6,935 g, screw conveyor diameter: 130 mm, production capacity: 17,000 unit/h, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 320 t Shot weight: 6,935 g Screw diameter: 130 mm Performance: 17,000 preforms/h MACHINE DETAILS Configuration: 72-cavity, 4-stage Hfodpfxjx A Efhe Aftjr EQUIPMENT Take-out unit Conveyor belt LT/h 1825 TPS robot TRT-M4-72-E

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, clamping force: 4,000 kN, screw diameter: 70 mm, displacement volume: 1,155 cm³, injection pressure: 1,482 bar, ejector stroke: 250 mm, TECHNICAL DETAILS Clamping Unit Clamping force: 4,000 kN Mounting platen (h x v): 1,400 x 1,080 mm Minimum mold height: 350 mm Opening stroke: 950 mm Ejector stroke: 250 mm Ejector force (forward): 83 kN Hfedpex Dbp Sofx Aftor Injection Unit Screw diameter: 70 mm Injection pressure: 1,482 bar Shot volume: 1,155 cm³ Shot weight (PS): 1,040 g Injection flow: 419 cm³/s Screw speed: 183 rpm Nozzle contact force: 110 kN MACHINE DETAILS Dimensions & Weight Space requirement approx.: 8.30 x 2.35 x 2.48 m Total weight: 31,200 kg Rated power pump motor: 45 kW EQUIPMENT Oscillating elements 2 x 24-way water manifold Material hopper Degassing screw Robot interface 4 x hydraulic core pulls

Year of construction: 2016, condition: ready for operation (used), General Data Machine weight 9500 kg Hfodpfxjx D Hp Ro After This Engel Insert 90 was manufactured in 2016. A vertical injection moulding machine with a total run time of only 54 hours and a weight of 9,500 KG. Consider the opportunity to buy this Engel Insert 90 vertical injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: excellent (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology, -Condition: Mill is equipped with new blade set without control, without sieve -Manufacturer: RAPID, side mill cutting mill Hfjdowg Axvspfx Aftor -Type: 650-M -Drive motor: 37 kW -Number of cutting blades: 10 pieces -Number of counter knives: 2 pieces -Inlet cross-section: 600 x 300 mm -Rotor width: 610 mm -Rotor diameter: 300 mm -Number: 2 cutting mills available -Price: per piece -Dimensions: 1385/1200/H2170 mm -Weight: 1208 kg

Condition: used, Year of construction: 1998, functionality: fully functional, 1.0 pc. Mill for plastic material size reduction Manufacturer: RAPID Hfedpex H Aihefx Aftsr Model: 1521 Year of manufacture: 1998 Feed opening: 300 x 400 mm Rotor diameter: 250 mm

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 134022-100, clamping force: 3,000 kN, screw diameter: 60 mm, injection pressure: 2,040 bar, injection weight: 840 g, TECHNICAL DETAILS Clamping Unit Clamping force: 3,000 kN Platen size (H x W): 1,020 x 1,030 mm Tie bar distance (H x W): 710 x 630 mm Minimum/maximum mold height: 375 mm Maximum opening stroke: 1,175 mm Injection Unit Screw diameter: 60 mm Shot volume: 913 cm³ Shot weight: 840 g Injection pressure: 2,040 bar MACHINE DETAILS Hjdpfox A A S Esx Aftofr Net weight with control cabinet: 12.2 t EQUIPMENT The machine can be inspected and tested under power. Additional photos and videos available upon request. Loading and transport can be arranged.

Condition: good (used), This jug automatically refills your battery with demineralized water.  Indispensable! Hfsdpfx Afsu Hgw Ustor Price includes shipping within the Netherlands.

Condition: good (used), Year of construction: 1987, functionality: fully functional, Clamping unit heating capacity, 1 heating rod / 8 heating rod: 0,48 / 0,9 kW clamping force: 2 x 500 kN heating plate dimensions: 550 x 600 mm Hfodpfx Ajx Hhi Hjftjr piston stroke: 250 mm diameter of piston, main cylinder: 240 mm diameter of piston, locking cylinder. 39 mm locking cylinder: 260 mm Return capacity: 2 x 600 kN dimensions: 2600 x 2100 x 2100 mm weight approx.: 5 t

Condition: ready for operation (used), Year of construction: 2000, operating hours: 3,688 h, General Data Measurements width 1160 mm Measurements depth 5146 mm Measurements height 2365 mm Machine weight 9800 kg Injection Unit Screw diameter 60 mm Shot weight 644 g Stroke volume 678 cm³ Clamping Unit Clamping force 250 T Opening stroke 580 mm Max open daylight 1130 mm Mould height min 250 mm Hsdpfxjx D Rg To Aftofr Mould height max 550 mm Additional Equipment Core Pull: 2 Air Circuit: 1 This Victor VS-250 hydraulic injection moulding machine was manufactured in 2000. It is ideal for precision plastic processing tasks. Contact us for more information about this machine. Application Types Injection Moulding

Condition: used, Year of construction: 1998, functionality: fully functional, 1.0 pc. Mill for plastic material size reduction Manufacturer: RAPID Model: 1521 Year of manufacture: 1998 Feed opening: 300 x 400 mm Rotor diameter: 250 mm Hedpox H Achofx Aftefr

Condition: ready for operation (used), Year of construction: 2014, operating hours: 47,000 h, functionality: fully functional, machine/vehicle number: 135541-100, clamping force: 3,500 kN, screw diameter: 65 mm, injection pressure: 2,070 bar, ejector stroke: 200 mm, controller model: B6P, TECHNICAL DETAILS Clamping Unit Clamping force: 3,500 kN Platen size (H × W): 1,030 × 1,140 mm Tie bar spacing (H × W): 710 × 710 mm Min. / Max. mould height: 300 / 710 mm Hfodpfx Aex A A E Eeftsr Max. opening stroke: 1,380 mm Centring ring diameter: 160 mm Ejector stroke: 200 mm Injection Unit Screw diameter: 65 mm Shot volume: 1,171 cm³ Shot weight (PS): 1,078 g Injection pressure: 2,070 bar Max. injection speed: 600 mm/s MACHINE DETAILS Control: B6P Operating hours: 47,000 h EQUIPMENT 4 pneumatic valves 1 core puller

Condition: used, Year of construction: 2001, functionality: fully functional, 1.0 pc. Mill for plastic shredding Hedpfxoxvq Uuo Aftofr Manufacturer: RAPID Model: 1521 Year of manufacture: 2001 Feed opening: 300 x 400 mm Rotor diameter: 250 mm

Condition: ready for operation (used), Year of construction: 2014, operating hours: 49,462 h, functionality: fully functional, clamping force: 3,500 kN, screw diameter: 65 mm, injection pressure: 2,070 bar, ejector stroke: 200 mm, controller model: B6P, The toggle lever mechanism has been completely overhauled! TECHNICAL DETAILS Clamping Unit Clamping force: 3,500 kN Platen dimensions (H x W): 1,030 x 1,140 mm Tie bar spacing (H x W): 710 x 710 mm Minimum mould height: 300 mm Maximum mould height: 710 mm Maximum opening stroke: 1,380 mm Centerring diameter: 160 mm Ejector stroke: 200 mm Injection Unit Screw diameter: 65 mm Shot volume: 1,171 cm³ Shot weight (PS): 1,078 g Injection pressure: 2,070 bar Maximum injection speed: 600 mm/s MACHINE DETAILS Control system: B6P Operating hours: 49,462 h Hfjdpfex A A Akox Aftor EQUIPMENT Pneumatic valves: 4 units Cores: 2 units Toggle lever mechanism completely overhauled

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: X66609, clamping force: 6,600 kN, screw diameter: 84 mm, injection pressure: 1,650 bar, ejector stroke: 300 mm, controller model: CDS700, TECHNICAL DETAILS Clamping unit Clamping force: 6,600 kN Platen size (H x W): 1,370 x 1,370 mm Tie bar spacing (H x W): 900 x 900 mm Minimum/maximum mold height: 300 - 900 mm Maximum opening stroke: 1,840 mm Centering ring diameter: 200 mm Ejector stroke: 300 mm Injection unit Screw diameter: 84 mm Shot volume: 2,575 cm³ Shot weight (PS): 2,369 g Injection pressure: 1,650 bar Maximum injection speed: 500 mm/s MACHINE DETAILS Control system: CDS700 Clamping unit weight: 25,400 kg Injection unit weight: 7,000 kg Hsdpfjx A Awzjx Aftefr EQUIPMENT Pneumatic valves (6 pcs.) Core pull (1 pcs.)

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: X88628, clamping force: 6,600 kN, screw diameter: 84 mm, injection pressure: 1,650 bar, ejector stroke: 300 mm, controller model: CDS700, The cylinder, screw, and screw tip of the injection system were replaced a year ago! TECHNICAL DETAILS Clamping Unit Clamping force: 6,600 kN Platen size (H x W): 1,370 x 1,370 mm Tie bar spacing (H x W): 900 x 900 mm Minimum mold height: 400 mm Maximum mold height: 1,125 mm Maximum opening stroke: 2,065 mm Centering ring diameter: 200 mm Ejector stroke: 300 mm Injection Unit Screw diameter: 84 mm Injection volume: 2,575 cm³ Shot weight (PS): 2,369 g Injection pressure: 1,650 bar Maximum injection speed: 500 mm/s MACHINE DETAILS Hjdpsx A Avqofx Aftsfr Control system: CDS700 Weight of clamping unit: 29,300 kg Weight of injection unit: 7,700 kg EQUIPMENT Pneumatic valves (4 pcs) Cores: (1 pc)

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: X81559, clamping force: 9,000 kN, screw diameter: 115 mm, injection pressure: 1,740 bar, ejector stroke: 300 mm, controller model: CDS700, TECHNICAL DETAILS Clamping Unit Clamping force: 9,000 kN Platen size (H x W): 1,570 x 1,560 mm Tie bar spacing (H x W): 1,010 x 1,010 mm Min. mold height: 300 mm Max. mold height: 1,190 mm Max. opening stroke: 2,290 mm Centerring diameter: 250 mm Ejector stroke: 300 mm Injection Unit Screw diameter: 115 mm Shot volume: 6,232 cm³ Shot weight (PS): 5,733 g Injection pressure: 1,740 bar Max. injection speed: 300 mm/s Hfodpfxex A At No Aftsr MACHINE DETAILS Control system: CDS700 Weight of clamping unit: 44,500 kg Weight of injection unit: 20,000 kg EQUIPMENT Pneumatic valves (6 pcs.) Core pulls (1 pc.)

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: X81456, clamping force: 9,000 kN, screw diameter: 98 mm, injection pressure: 1,650 bar, ejector stroke: 300 mm, controller model: CDS700, Injection molding machine including Sytrama robot! TECHNICAL DETAILS Clamping Unit Clamping force: 9,000 kN Platen size (H × W): 1,570 × 1,560 mm Tie bar spacing (H × W): 1,010 × 1,010 mm Min. mold height: 300 mm Max. mold height: 1,190 mm Max. daylight: 2,290 mm Locating ring diameter: 250 mm Ejector stroke: 300 mm Injection Unit Screw diameter: 98 mm Shot volume: 4,010 cm³ Shot weight (PS): 3,690 g Injection pressure: 1,650 bar Max. injection speed: 400 mm/s MACHINE DETAILS Control system: CDS700 Clamping unit weight: 44,500 kg Injection unit weight: 12,500 kg Hfedox A Ar Ejpfx Aftsr EQUIPMENT Pneumatic valves: 4 units Core pulls: 1 fixed / 1 movable Sytrama 101 GL robot