Used plasma cutting machines for sale (138)

Condition: ready for operation (used), Year of construction: 2018, This KERF RUM 2500P plasma cutting machine was manufactured in 2018. It features a large cutting area of 15000mm x 2000mm and is equipped with two bridges, each with 275amp plasma. Full history from the manufacturer is available. Contact us for more information about this machine. Application Types Cutting Gedpfjx Hbkqex Aftokf

Condition: used, Year of construction: 2023, CNC Gantry Plasma Cutting Machine with Rotator Manufacturer: Microstep Model: MasterCut 6001.30PtkG Year of manufacture: 2023 CNC Control Working area: 3,000 x 6,000 mm 1 plasma torch with Kjellberg Q3000 power source 1 oxy-fuel torch GCE FIT+ three (cutting gas acetylene) Burning/cutting table with sectional extraction 6,000 x 3,000 mm Plasma rotator "MasterCut" with fully automatic support ACTG automatic calibration unit for the beveling head Godpoxu U Ddefx Aftjkf Kemper extraction system 8000 (year 10/2015) Asper Basic 2D programming software + Asper BevelCut software for bevel cutting programming Other technical data: MicroStep machine control with MMI console and 24" touchscreen iMSNC module expert system iMSNC module for automatic mechanical probe calibration iMSNC module assistant for loading CNC programs LCD control unit on the gantry Laser pointer with automatic offset transmission USB 3.0 ports for storage media MicroStep RemoteDiagnistics remote maintenance module Grating cover on the burning/cutting table Reinforced design of the burning/cutting table Connection of the fine plasma source to the CNC control Control for the automatic gas console Electrical and mechanical torch height sensing LED signal tower on the gantry bridge (2 colors) Tactile shutdown device for guide rails Light barrier safety system (collision protection) for the gantry bridge with emergency stop Smart Z Movement ACTG Calibration Report Fully automatic oxy-fuel torch support Automatic gas console for oxy-fuel torch (cutting gas acetylene) Active collision protection 101225ä

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Vacuum membrane press ARTEX VPS - 300 350x150 TECHNICAL DATA - dimensions of working table length/width 3500x1500mm - working temperature ±40-60°C - maximum temperature ±80°C - additional heating with air - power of heaters - 3×1,5kW 4,5kW - power of vacuum pump 0,75kW - capacity of vacuum pump 25m3/h Gkodpfx Astp Td Toftef - noise level 67dB - dimensions L/W/H 3900x1800x1400mm - weight about 550kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3700x2400x1470 mm Weight 1500 kg Total power requirement 8,5 kw Gkjdpfovz E A Iox Aftef

Condition: ready for operation (used), Year of construction: 2014, This SAF PRO ALPHATOME 20 40 plasma cutting machine was manufactured in 2014. It features a robust 4000 x 2000 mm table and includes a NERTAJET HP150 plasma source along with PRONEST HYPETHERM NESTING SOFTWARE. Designed for cutting up to 20 mm steel, it ensures precision with CNC control and linear guides on all axes. Consider the opportunity to buy this SAF PRO ALPHATOME 20 40 plasma cutting machine. Contact us for more information. Application Types Cutting Gedpfsx D D Nhex Aftokf

Condition: used, Year of construction: 2017, CNC Gantry Plasma Cutting Machine (Bevel Unit) with Oxy-Fuel Torch Manufacturer: Zinser Model: 2425-I/3600 Year of manufacture: 2017 CNC Control: 5010 Track length: 11 m Burning table with oscillating conveyor system, including extraction system Dimensions: 2,000 x 8,000 mm 1 Plasma torch with Hypertherm XPR300 power source Gkedpfew Rpvbex Aftef Automatic gas console Incl. automatically rotating plasma bevel unit Bevel System 2015/350 1 Oxy-fuel torch Downflow filter system 3DFP9-SP Power: 9 kW Laser diode 101225ä

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3200x1960x1470 mm Gsdpfevz E Azsx Aftekf Weight 1000 kg Total power requirement 8,5 kw

Condition: ready for operation (used), Year of construction: 2017, Media Power consumption 4.0 KVA Additional Equipment Energy chain for plasma operation Environmentally friendly extraction system with sectional distribution Automatic gas console for monitoring and controlling gas flow and pressure This ZINSER 2425-I/3600 plasma cutting machine was manufactured in 2017. It features a CNC-controlled system for both plasma and oxyfuel cutting, handling materials up to 35 mm thick and pipes from 100 to 620 mm. The machine offers a working area of 2000 x 8000 mm and includes advanced features like a 3D plasma cutting system, CNC path control, and an integrated network card for enhanced connectivity. For more information about this machine, please reach out to us. Application Types Gsdsx D R S Aspfx Aftekf Cutting

Condition: used, Year of construction: 2020, CNC gantry plasma cutting machine with Skew Rotator beveling unit Manufacturer: Messer Model: Multitherm 4000 Year of manufacture: 2020 CNC control: Global Control Plus Working area: 3 x 12 m Track gauge: 4,000 mm 1 oxy-fuel torch ALFA 1 plasma torch with Skew Rotator beveling unit Power source: Hypertherm XPR300 Cutting thickness: 50 mm piercing 80 mm separating cut Extraction table Beuting without filter unit Software: Omniwin with Bevel 101225 Godsx Dlwmepfx Aftjkf

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3200x1960x1470 mm Gedpfxjvz E Aue Aftskf Weight 1000 kg Total power requirement 8,5 kw

Condition: ready for operation (used), Year of construction: 2021, This ESAB Suprarex HD 4000 plasma cutting machine was manufactured in 2021. It features a track width of 4000 mm and a track length of 12000 mm, supporting a maximum working length of 9000 mm. The machine is equipped for both oxyfuel and plasma cutting, handling material thicknesses up to 200 mm. If you are looking to get high-quality cutting capabilities, consider the ESAB Suprarex HD 4000 machine we have for sale. Contact us for more information. Application Types Cutting Gkjdpsx D D N Uofx Aftef

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2000x1960x1470 mm Weight 900 kg Total power requirement 8,5 kw Gedpfovz Ez Rsx Aftjkf

Condition: ready for operation (used), Year of construction: 2008, operating hours: 22,560 h, General Data Measurements width 540 Measurements depth 960 mm Measurements height 1050 mm Machine weight 196 kg Godpfx Afex D Hqujtokf Table Outer length 4500 mm Outer width 2000 mm This plasma cutting machine was manufactured in 2008. It features a CNC control MSNC500P Windows and a plasma source with a cutting range of 0.5 to 25/30mm, adjustable from 10 to 160 A for cutting. The flame cutting table measures 4500x2000mm, suitable for both plasma and oxyfuel cutting. It operates efficiently within a temperature range of +5 to +45 °C. Consider the opportunity to buy this MicroStep SPL-P 4501.25 plasma cutting machine. Contact us for more information about this machine. Application Types Cutting

Condition: ready for operation (used), Year of construction: 2019, operating hours: 5,800 h, Table Table load 7500 kg This VOORTMAN V320 was manufactured in 2019. It features a Kjellberg Smart Focus 300 plasma source and a Donaldson DFPR06 extraction system. Capable of handling mild steel with a panel length range of 850 – 6,100 mm and thickness from 6 – 75 mm. It includes options for punch marking and countersinking, enhancing versatility. Consider the opportunity to buy this VOORTMAN V320 plasma cutting machine. Contact us for more information about this machine. Application Types Gsdpex D N Aaefx Aftokf Cutting

Condition: ready for operation (used), Year of construction: 2008, This GASPARINI Spark 20040 was manufactured in 2008. A robust plasma cutting machine, it features a substantial working area of 4000×2000 mm and can handle sheet metal up to 60 mm thick. With cutting speeds ranging from 0.1 to 30 m/min and a maximum positioning speed of 40 m/min, it's designed for efficiency. Consider the opportunity to buy this GASPARINI Spark 20040 plasma cutting machine. Contact us for more information about this machine. Application Types Gkedpfxsx D Sq Ho Aftsf Cutting

Condition: ready for operation (used), Year of construction: 2013, This MGM Omnicut 3100 was manufactured in 2013. A robust plasma cutting machine, it features a 12-meter table and a powerful Kjellberg HiFocus 360i plasma source. It efficiently handles mild steel up to 80 mm, stainless steel up to 80 mm, and aluminum up to 100 mm. If you are looking to get high-quality cutting capabilities, consider the MGM Omnicut 3100 machine we have for sale. Contact us for more information. Gjdpfx Aox D Npaoftokf Application Types Cutting

Condition: ready for operation (used), Year of construction: 2012, General Data Measurements width 5125 mm Measurements height 2100 mm Control Unit Brand ESAB Gjdsx D Slqopfx Aftjkf Model EPP-360 Vis 51 Main Drive Spindle speed range 50.8–25000 mm/min Number of axis 3 This 3-axis ESAB Combirex DX 4000 plasma cutting machine was manufactured in 2012. It features the ESAB WELDING & CUTTING Vission 51 control and a Precision Plasmarc 368 plasma source. Capable of cutting up to 40 mm with plasma and 300 mm with gas, it offers a cutting area of 3000 × 13000 mm. Consider the opportunity to buy this ESAB Combirex DX 4000 plasma cutting machine. Contact us for more information. Application Types Cutting

Condition: ready for operation (used), Year of construction: 2017, General Data Machine weight 9000 kg Measurements height 2300 mm Measurements depth 4300 mm Movement X-Axis Movement 3000 mm Y-Axis Movement 1200 mm Gkjdpfxjx D It Rs Aftsf Main Drive Number of axis 3 Dimensions Machine Length 15000 mm This 3-axis Hypertherm PL-YPE 3100 was manufactured in 2017 and features a Hypertherm® HyPerformance HPR 400XD gas plasma source. It offers precise cutting with a maximum capacity of 50 mm in mild steel, 75 mm in stainless steel, and 45 mm in aluminum. The effective cutting area is 3000 mm by 1200 mm. If you are looking to get high-quality cutting capabilities, consider the Hypertherm PL-YPE 3100 machine we have for sale. Contact us for more information. Application Types Cutting

Condition: ready for operation (used), Year of construction: 2015, This KOIKE PNC-12 EXTREME plasma cutting machine was manufactured in 2015. It features a robust CNC control system and an effective cutting area of 1500 x 3000 mm. Capable of handling a maximum cutting thickness of 50 mm and equipped with rapid travel speeds up to 4000 mm/min, it ensures efficient operation. Consider the opportunity to buy this KOIKE PNC-12 EXTREME plasma cutting machine. Contact us for more information about this machine. Application Types Gkjdpfx Asx D Nhvjftjf Cutting

Condition: ready for operation (used), Year of construction: 2018, This ECKERT Onyx was manufactured in 2018. It features a robust table size of 2500 × 13000 mm and a cutting table of 2500 × 13500 mm, equipped with two fume exhaust channels. It includes two gas cutting heads capable of handling up to 300 mm thick mild steel and a Kjellberg Smart Focus 300 plasma source. Ideal for large-scale cutting tasks. Contact us for more information about this machine. Gksdpsx D N A Tefx Aftef Application Types Cutting

Condition: ready for operation (used), Year of construction: 2008, General Data Measurements width 4100 mm Measurements depth 10169 mm Machine weight 5500 kg Gjdpjx D Ey Ijfx Aftskf Control Unit Brand MicroStep Model IMSNC Main Drive Number of axis 3 This 3-axis MicroStep PLS 7501.25PG plasma cutting machine was manufactured in 2008. It features a robust MicroStep MSNC500 control system and dual cutting capabilities with a HPR 260 AGC plasma and an acetylene gas burner. The machine offers a maximum cutting thickness of 50 mm and operates efficiently within a large working field. If you are looking to get high-quality cutting capabilities, consider the MicroStep PLS 7501.25PG machine we have for sale. Contact us for more information. Application Types Cutting

Condition: ready for operation (used), Year of construction: 2016, Control Unit Brand SIEMENS Model General Data Measurements width 2100 mm Measurements depth 7000 mm Measurements height 1155 mm Max Material Thickness Stainless steel 6 mm Aluminium 6 mm Additional Equipment Gkjdsx D D I Ropfx Aftsf Plasma Source: HYPERTHERM POWERMAX 1000 This SPIRO 6000V4 plasma cutting machine was manufactured in 2016. It features a large work table of 6000 x 1500 mm and can handle materials up to 6 mm thick, including steel and aluminum. Equipped with a SIEMENS controller and HYPERTHERM POWERMAX 1000 plasma source, it supports DXF file import/export. Ideal for medium to large industrial settings. Contact us for more information about this machine. Application Types Cutting

Condition: ready for operation (used), Year of construction: 2020, General Data Measurements width 5500 mm Measurements depth 8100 mm Measurements height 2500 mm Main Drive Number of axis 4 Additional Equipment Dust & Fume Extraction System: Air Flow: 12000 m³/h Filter Area: 171 m² This 4-axis Baykal BPS-3006 was manufactured in 2020, featuring a CNC Plasma Cutting Machine with a cutting table size of 3000 × 6000 mm. It includes a rotary axis for tube and pipe cutting and is equipped with a Hypertherm HPR 130XD plasma source. If you are looking to get high-quality cutting capabilities, consider the Baykal BPS-3006 machine we have for sale. Contact us for more information about this machine. Gkedpfex D Nuiox Aftof Application Types Cutting

Condition: ready for operation (used), Year of construction: 2020, This GEPELEKTRO Phantom CNC was manufactured in 2020. It features a large working area with table dimensions of 12,000 × 3,000 mm and is equipped with a Lincoln Electric Burny Phantom II controller. It can handle flame cutting up to 300 mm steel and plasma cutting up to 50 mm steel. The machine includes a complete extraction system and Messer OmniWin 2019 software. Contact us for more information about this machine. Application Types Gjdpox E Edfofx Aftjkf Cutting

Condition: ready for operation (used), Year of construction: 2012, General Data Measurements width 700 mm Measurements depth 1054 mm Measurements height 978 mm Gkjdpfxox D Ixao Aftjf Machine weight 197 kg This Thermal Dynamics UltraCut 200 was manufactured in 2012. It features a robust output current range of 10-200 A and a duty cycle of 100% at 200 A, ensuring continuous operation. The cutting capacity on mild steel reaches up to 40 mm with a maximum edge start of 65 mm. It includes a liquid-cooled XT-300 precision torch and a DFC-3000 digital gas console with touchscreen. For more information about this machine, please reach out to us. Application Types Cutting