Used mesh welders for sale (43)

Condition: excellent (used), functionality: fully functional, welding power (max.): 180 kVA, Schlatter Posiweld type Libra. Machine was built in 2005, control was upgraded by Schlatter in 2022. Hpodpsxlvn Ejfx Aftoa

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, QRP26 Automatic Mesh Welding Portal inclusive of: • Tooling for 49 line wires • Top and bottom electrodes and current distribution • Pneumatic weld presses x 25 (Parallel/Direct Weld Triplex) • Transformers 250kvA x 13 • Weld controllers Hedoxgg T Uopfx Aftjpa • Electrical panel • Programming computer • 2500mm (100”) wide Including PLL 26 automatic linewire picking and loading system.

Condition: good (used), Year of construction: 2024, functionality: fully functional, 11 pieces lower holder Hsdpfx Afoxlin Sjtepa 7 pieces electrode 60 10 pieces lower electrode 45 Used

Condition: excellent (used), Year of construction: 1999, FULLY AUTOMATIC - EVG G55/102 MESH WELDING LINE Construction year – 1999. Line is refurbished 4-5 years ago. Electrical cabinet completelly updated in software, PLC S7-405 and electrical systems in DECEMBER 2018. Line + cross wires from coils Mesh width: min. 1200mm to max. 2500mm Mesh length: min. 2000mm to max. 6000mm Separations between AT: 50mm – 1000mm stepless Separations between AL: 100mm, 150mm, and multiples Diameter AT: min. 3,8mm to max. 8mm Diameter AL: min. 3,8mm to max. 8mm Machine speed: max. 150 QD/min. Reel weight: max. 3000 kg Stack height: max. 700mm Panel weight: max. 150 kg Power rating of welding transformers at 50% intermittent duty: 960 KVA Drive power: 153kW Tension de red: 3 x 400V Network frequency: 50 Hz Dimensions (approx. mm) Machine: L x W x H Weight: G55L/102-RV 4900mm x 1800mm x 2300mm 15,000 kg T6B/102 7500mm x 2200mm x 1800mm 6,000 kg T6B/102 5200mm x 1700mm x 2200mm 4,200 kg Main Voltage: 3 x 400 V Frequency: 50 Hz Connection power: 960 kVA (50% S.I.) 192 kVA (drive force) Hpsdpfx Afoxvmametea 24 longitudinal wire straightener Longitudinal wire dragger Lars loop Longitudinal straighteners Longitudinal feed Welding head Shears Mesh extraction Turner stacker Exit table of 7m Cross feeders Cross wire drag

Condition: new, Year of construction: 2025, working width: 2,500 mm, wire diameter (max.): 12 mm, mesh size: 100 mm, 6-12mm Mesh length 6M Mesh width 2.5M Hedpfx Asxyqg Ejftjpa 24 welding point Welding speed 40-70 times/min

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 215, welding power (max.): 30 kVA, wire diameter (max.): 16 mm, type of input current: three-phase, EVG wire straightening and cutting machine: PCN 2-16: working area: 6-16 mm, speed: -150 m/Min., drive power: 30 kW, grid connection: 3 x 380 V 50 Hz; In good working condition. The machine has been dissassembling by an EVG technician and was perfectly working. Equiped with 4 payoff stations and 2 motorised transport tables of 12 meters. Hodpfx Aexg Ry Softjpa

Condition: refurbished (used), functionality: fully functional, working width: 1,200 mm, Schlatter MG900, 1,200mm wide, with 4 x 100kVA transformers, updated control with Siemens S7-300 PLC from 2016. Mechanically completely rebuilt and all new control cables. Hpedsvvf T Aopfx Aftea

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Wire mesh welding system (Schlatter MG316d) H6.1, Spool pay-off system, line wire LEU1.1, Line wire end supervision RZ2, Alignment device with center adjustment LHV5, Line wire pull-off device LHA5, Line wire compensating system loop Hpjdpsxgg Rtjfx Aftja RZT, Alignment device with center adjustment LVR6, Line wire roller advance unit MG26.26.3, Welding machine H17, Spool pay-off system, cross wire DV6, Prefeeding system DA4, Loop control device DES5.1, Cross wire pull-in and feeding device SD3, Cross wire shear QAE6, Cross wire feeding device SL4.3, Mesh shearing machine MST17.4, Mesh stacking device RGW-L, Roller conveyor SAB2.1, Automatic tying device RGW-L, Roller conveyor RGW-L, Roller conveyor SPH3/6000, Mesh package stacking device RGW-S, Roller conveyor MP PLS S7-1500, Control center E10-80, Wire butt welding unit

Condition: refurbished (used), Year of construction: 2025, working width: 2,450 mm, Refurbished Schlatter MG903 - ZG24 - Longitudinal wire insertion LFE - Longitudinal wire feed LV - MG24.4 mesh welding machine Hpodpfev Ed Ansx Aftja - Cross wire feeder QF8 - Mat extraction MVL4.2 - De-stacker MS12 Control and power cabinet - Siemens S7 TIA machine control Mesh size : 2450mm Wire: 2-12mm

Condition: used, Year of construction: 1970, functionality: fully functional, machine/vehicle number: D34E/8218, Offer Number: D34E/8218 Machinetype: mesh welder Make: SCHLATTER Type: PG8 Constr. year: 1970 wire diameter: 1,5-6,5 mm working width: 850 mm line wire distance: 20-60 mm Hodowi Thmopfx Aftopa distance of cross wire: 10-100 mm Location: Europe

Condition: refurbished (used), SCHLATTER Welded wire mesh production line MG24 Full revamped WORKING RANGE Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Adjustable by cutting device (0-1) Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24 Hpjdpfx Aowu Tu Doftja WELDING MESH MACHINE MG 24.1/8C, Basic equipment including: - 1 Machine frame - 1 Upper support for press reception, continuously adjustable by hand crank - 1 Magnet supports with retaining magnets and weft wire monitoring. - 1 Row of pneumatic solenoid valves for press actuation. - 1 Installation for air and water. - 2 Pneumatic rotary drives with oil damping - Static motor torque with 5 bar compressed air: 480 Nm - Front continuously adjustable from: 25 - 250 mm adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION 8 Type C Transformers Rated power of each transformer: 100 kVA No-load secondary voltage: 7.1 V Rated secondary current: 14 kA 8 Thyristor contactors ES 130 12 Welding presses: 5.0 kN 12 Chain current bridge for spacing of warp wires: 50-100 mm 12 Chain current bridge for spacing of warp wires (for offset warp wires): 100 mm 10 Chain current bridge for spacing of warp wires: 100-150 mm 8 Chain current bridge for spacing of warp wires (for offset warp wires): 150 mm 6 Chain current bridge for spacing of warp wires: 150 - 200 mm 6 Chain current bridge for spacing of warp wires (for offset warp wires): 200 mm 24 Lower electrode holders Cu with standard angled electrodes and each with a water-cooled current cable, width: 58 mm 24 Wire clamping pliers Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24

Year of construction: 2019, condition: new, Machine is designed to produce two spacers in the same time, with double stroke (pitch) of 150 mm, with heights from 70 to 220 mm, diameter of line wires from 3.5 to 5 mm and diagonal wire diameter from 3.5 to 4 mm. The main parts of machine: 1. Pay-off 2. Straightening system Hsdod N Hv Eepfx Aftspa 3. Line wire pooling unit with loop. 4. The system of diagonal wire bending 5. Welding unit 6. Output table with bending unit 7. Energy electrical cabinet 8. Control cabinet

Condition: reconditioned (used), Schlatter MS8 stacker for use on 4ft (1,200mm) wide mesh welders Hjdofc Nacopfx Aftepa pneumatic pick and place stacker for 1 or 2 stacks

Condition: good (used), Year of construction: 2003, functionality: fully functional, FULLY automatic mesh welding line SCHLATTER DOUBLE CROSS WIRE FEEDING / WELDING Hpodpfx Afsq Aumustoa Model - MG320 Year - 2003. Line and cross wires from coils.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, working width: 1,240 mm, wire diameter (max.): 12 mm, type of input current: AC, Machine Overview: Schlatter MG900 MG12 Mesh Welding Machine - "Offical Expose upon request" The Schlatter MG900 is a powerful and refurbished resistance welding machine, specifically designed for the production of wire mesh panels. With a width capacity of up to 1250 mm and a length of 3000 mm, it handles wire diameters of up to 12 mm. This machine has undergone extensive modernization to deliver maximum efficiency and flexibility in production. Main Components • LV - Longitudinal Wire Feeder o Upgraded with a high-precision servo axis o Hopper magazines for longitudinal wires up to 3000 mm • MG12.4 - Mesh Welding Unit o Equipped with 3 to 6 transformers. o Up to 12 Schlatter welding presses with a capacity of 5 kN •QFD34 - Cross Wire Feeder o Allows for double cross wire insertion for two different cross wire diameters / length, *Note: The second level is not yet installed in the photos • MVL - Mesh Extraction Unit o Controlled by a new MS2N Servo Motor from Bosch Rexroth CrtlX o Equipped with four Schlatter mesh grippers (expandable upon request) • MS - Mesh Stacker o Automatically stacks mesh panels with a travel path of up to 3100 mm • Control and Power Cabinet o Siemens S7 TIA Control System o Rexroth CrtlX Components for high-dynamic motion control Specs: • Mesh Width (Transverse Wire Length) max. 1250mm / min. 200mm • Mesh Length (Manual Loading) max. 3200mm / min. 300mm Hpedevtg Sbjpfx Aftoa • Distance Between Outer Longitudinal Wires max.1200mm • Longitudinal Wire Spacing 20 - 150mm • Cross Wire Spacing min. 12.5mm • Longitudinal Wire Diameter 2.0 - 10.0mm • Transverse Wire Diameter 2.0 - 8.0mm • Maximum Number of Longitudinal Wires max.24

Condition: refurbished (used), Year of construction: 2025, JAGER welded mesh line U-Gsa-st Full revamped "as new" Technical data 24 pay off for longitudinal wire spools, longitudinal wire straightening equipment Line wire pull off system Longitudinal wire loop Longitudinal wire straightening equipment Cross wire magazine Number of installer line wires : 24 up to 10 mm Diameter of lines wires : 4 to 10mm Diameter of cross wires : 4 to 10mm Separation between line wires : 100, 150, 200, and 300 mm Separation between cross wires : min 30 mm , steplessly programmable Max. length of cross wire (mesh width) 2500 mm , max welding width : 2400 mm Mesh length : min 3000 mm and max . 6000 mm Trafos : 8 x 160 Kva Number of installer line wires: Number of installer line wires : 24 up to 10 mm Diameter of lines wires: 4 to 10mm Diameter of cross wires: 4 to 10mm Separation between line wires: 100, 150, 200, and 300 mm Separation between cross wires: min 30 mm , steplessly programmable Max. length of cross wire (mesh width): 2500 mm Max welding width: 2400 mm Mesh length: 3000 - 6000 mm Hpjdpfxowu Dcxs Aftoa Trafos: 8 x 160 Kva

Year of construction: 2010, condition: excellent (used), Technical Details : - For sale Full automatic mesh welding line PITTINI / EVG - Mesh width - max. 2400 mm Hedpfx Ajfwm D Tjftopa - Mesh length - max. 8000 mm - Dia. Longitudinal wire - max. 10 mm - Dia. Cross wire - ma. 10 mm - Max. number of longitudinal wire - 24 - Longitudinal and cross wire from spools - Cross wire feeding unit - EVG - Speed - max. 110 tacts / min. - installed power - 1,5 Mw - Automatic mesh packing unit

Condition: excellent (used), Year of construction: 1992, Manufacturer EVG Type TSD 7-25 Machine No. 958 Year of manufacture 1993 Working direction L > R Beam types KT 8… Hsdpewp Ilyofx Aftspa Beam height (mm) 90-250 Carrier length min. (mm) max. (mm) 14,000 Fixed lengths: Yes Cutting pitch (mm) 100/200 Spool unwinder (pcs.) 5 LAR: Yes Wire diameter - 5-12 mm smooth/ribbed Diagonal - 4-7 mm smooth / ribbed Stack height max. (mm) - 500

Year of construction: 2019, condition: new, Machine is designed for making panel welded meshes, width 2150 mm, length 6000 mm with distance between line wires 150 mm, with distance of cross wire from 25 to 300 mm and wire diameter from 4 to 8 mm. Basic parts of the machine: 1. Pay-off for line wire. Hpodpfx Afed N Hvqetea 2. Straitening unit. 3. Line wire pooling unit with loop. 4. Welding unit. 5. Shear. 6. Turner with panel’s stacker. 7. Energy electrical cabinet. 8. Control cabinet. Machine is new !

Year of construction: 1990, condition: excellent (used), Technical Details : Hpjdpfx Asd Sfgbjftoa – Year – 1990/2012 – Model – 8/SR12 – Speed – max. 70 tact/min. – range of opening mesh space – 25×25 – 100×100 mm – Wire range – 1,5 – 5 mm – Number of transformers – 4 x 100 kw – Mesh width – max. 1200 m – Mesh lenght – 1000 – 3000 mm On line was made new control panel and transformers in 2012

Condition: excellent (used), Year of construction: 2009, Technical Details : Hpjdpforn N Efjx Aftoa Year - 2009 Beam welding machine outlet height: 1400mm (UK beam from ground) Min. strap length: 0.8 m Max. beam length: 16.0 m Base width during production: 58 mm (inside diagonals) Finished beam width: 70 – 116 mm (external dimensions of bottom chords) Lattice girder production speed: max. 15 m/min Design of the wire feed speed: 18 m/min (upper and lower belt) 38 m/min (diagonals) Carrier types that can be produced: KT KTS Top belt Ø: 5 – 16 mm 5 – 7 mm Lower belt Ø: 5 – 16 mm 5 – 7 mm Diagonal Ø: 4.5 – 9 mm 5 – 7 mm Height: 70-400mm 80-310mm Division of the diagonal: 190 – 210 mm 200 mm Primary material: Cold or hot rolled reinforcing steel from coil in accordance with EN 10080:2005 in weldable quality, max. carbon content 0.20 % The line is in excellent working condition !

Condition: excellent (used), Technical Details : Year of manufacture: 1985 (fully electric in 2007, partial in 2010 underwent a mechanical overhaul.) Hodpforyv S Uex Aftjpa The mesh max. width: 1500 mm Mesh density: 15 welding heads in arbitrary distribution Increment: 20mm – 200mm. Wire thickness: 1.2mm - up to 2.2mm (max 650 N/nmm - We have already welded 2.5mm also wired.) Energy demand: 14 kVA (max) Weight: approx. 8 tons Drive: digital servo, control (PLC). Stepless regulation.. Accessories: manual

Year of construction: 1978, condition: excellent (used), Technical details : Hpsdpfx Ajlf Iqnsftea -Manufacturer- DRAWEBA - Model - DDANS 17 l - Year - 1978 - Wire Diameter - 1,4 -1,6 mm - Mesh opening size - 10x10 mm min. - Mesh width - 1600 mm

Condition: excellent (used), Year of construction: 2003, working width: 215 mm, welding power (max.): 750 kVA, Complete Mesh welding/Lattice girder factory Factory consists : - Mesh welding line SCHLATTER PG 24 , Semi- automatic , Year - 2002 Hpodpfxeqy Ek As Aftea - Lattice Girder Line SMEI , Full automatic , Year - 2003 - Straightening and cutting machines 1x Wafios R4 2 x VITARI NR16 1X VITARI NR10 - Cold drawing line SMEI , Input wire max.10mm, Speed - 4m/sec. - But welding achine SMEI - Wire sharpener SMEI

Condition: excellent (used), Year of construction: 2004, Technical Details : Year of manufacture: 2004 The mesh max. width: 2200 mm Mesh density: 20 welding heads in arbitrary distribution (40 heads are also possible) Increment: 20mm - up to 200mm Wire thickness: 1.6mm-3.0mm (max 550Nnmm) Energy requirement: 8 kW Weight: approx. 10 tons Hedpfxoryv Sij Aftopa Drive: digital servo, control (PLC).. Stepless regulation.. Accessories: manual