Condition: used, Illumina DNA Sequencer MiSeq SY-410-1003 Description: RFID tracking for consumables MiSeq Control Software 2.6 LTSC Operating environment Temperature: 22°C ± 3°C Humidity: Non-condensing 20%–80% Altitude: Less than 2,000 m (6,500 ft) Air quality: Pollution degree II Nedpfexqnvrsx Agzjdc Ventilation: Maximum 1,364 BTU/h For indoor use only Light Emitting Diode (LED): 520 nm, 660 nm Dimensions W × D × H: 68.6 cm × 56.5 cm × 52.3 cm (27.0 in × 22.2 in × 20.6 in) Weight: 57.2 kg (126 lb) Power supply 90–264 VAC at 50/60 Hz, 10 A, 400 W Radio Frequency Identification (RFID) Frequency: 13.56 MHz Power: 100 mW Product safety and compliance NRTL certified IEC 61010-1 CE marked FCC/IC approved Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) Weight: approx. 35 kg (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Condition: good (used), Year of construction: 2020, Fully automatic assembly line for MA disposable face masks Manufacturer: PIA Automation Model: PIA-M200101 Year of manufacture: 2020 Mask types: - Single-layer nonwoven masks - Three-layer nonwoven masks Mask dimensions: 17.5 × 9.5 cm (adult size) Output: 80 pieces/min Ultrasonic frequency: 20 kHz Machine dimensions: 6000 x 5000 x 2800 mm Voltage: 400V – 50 Hz Compressed air: 5-7 bar Power supply: 12 kW Cycle time: 80 pieces/min High throughput: 100,000 units per day Simple and safe operation Automatic alarm system Integrated intelligent control system Single-operator interface The manufacturing process includes: - Feeding of filter material, folding and pressing - Feeding of nose bridge clips - Mask forming - Cutting of masks - Welding of ear loops - Stacking for packaging and other auxiliary processes Especially suitable for the production of three-layer disposable masks. Njdpfx Asu T Rydogzodc Additionally equipped with a UV unit to increase hygiene standards and a stacking device for downstream packaging processes. Ref: 221025ä

Year of construction: 2022, condition: like new (used), SencorpWhite CeraTek TA12-P/2 heat sealer Make: SencorpWhite Type: CeraTek TA12-P/2 Function: Heat sealer / For sealing medical pouches / Pouch sealing machine Year of manufacture: 2022 Condition: As good as new (hardly used) Product Description The CeraTek P/2 Series Precision Rotary Sealer is a versatile precision benchtop sealer designed for sealing medical pouches and other precision sealing applications The TA12-P/2 is a 12″ model - Maximum seal width 11.5" (approx. 30 cm) Standard features Top heat PLC with touch screen HMI Nodpfx Agsvdp N Dszjdc Temperature control with closed loop control Short cycle alarm Electronic pressure control High/low temperature alarm High/low pressure alarm Resettable cycle counter External output connections CE and ISO 11607 compliant Cat. 3 safety reset 115 Volt +/- 10% Scope of supply according to photo gallery No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: used, Dear Sir or Madam, We hereby offer you the following device for sale: Beckman Coulter DxFLEX System B5-R0-V0 Ndsdpfxoxl Tv Hj Agzoc The machine is sold with the equipment documented in the photos and specified in the advertisement text. Location: 40764 Langenfeld ATTENTION! The device originates from an insolvency. We are auctioning it off to the highest bidder on behalf of the creditor/bank. This is a closed auction. We do not provide any information about the current highest bid. Your bid becomes binding upon receipt by email. Please send us your binding bid by 10 a.m. on 19 October 2025. After the auction ends, you will be informed of the auction result within 72 hours.

Condition: good (used), functionality: fully functional, SafeFAST Elite 212D flow cabin with chassis Manufacturer: Faster Model: SafeFAST Elite 212 D “Technical sheet” from manufacturer: Ndodpfev Dhynox Agzjc Useful dimension (mm): WxDxH: 1192x580x740 Overall dimension (m)]: WxDxH: 1350x855x1545 Noise level (dbA): -54 Working Aperture (mm): 200 Exhaust flow rate (m3/h): 390 Lighting level (lux): 1200+ Weight (kg): 195 Electrical data: 230 V – 50 Hz

Condition: used, Year of construction: 2016, operating hours: 500 h, functionality: fully functional, the Mettler Toledo analyzing equipment Excellence T7 with accessories has not been in operation since 2024 Ndodpfx Agswhlctjzoc

Condition: excellent (used), Year of construction: 2021, operating hours: 3,592 h, functionality: fully functional, Dental milling machine Kulzer cara Mill 3.5L PRO+, Imes Icore Coritec 350i Loader PRO+, year of manufacture 2021, 3,592 total operating/standby hours, 358 milling hours, spindle cooling unit, water-cooled spindle with 2.6 kW power. Compatible materials: glass ceramic, PMMA, wax, zirconium oxide, hybrid materials, titanium/CoCr (preform). Application range: veneers, inlays, onlays, crowns, bridge frameworks, bridges, abutments (zirconium oxide and Ti/CoCr preforms), splints, drilling templates, bars, implant structures, and more. Features: - 2.6 kW high-frequency spindle with up to 60,000 rpm (requires water cooling) - 5-axis machining (3+2 and simultaneous operation) - Dynamic AC servo drives with absolute encoders Ndedpjxqnt Dsfx Agzec - Robust base chassis made of polymer concrete - Integrated zero-point clamping system - Dry and wet processing capability - High-gloss housing with LED lighting - Includes touchscreen and integrated PC - Automatic 20-position tool changer - Tool holder for 6 mm shank tools - Integrated precision tool length sensor - Temperature compensation for consistently high precision despite ambient temperature fluctuations - Extraction unit - Automatic 8-position blank changer - Includes management software "CNC-Manager" - Heavy-duty zero-point clamping system - Connection: 230 V The machine underwent maintenance on 21.10.2025 and is immediately ready for operation.

Year of construction: 2020, condition: good (used), FFP2 Mask Machine / Mask Production Line Manufacturer: Ruhlamat Model: MPL FFP2/016 Year of Manufacture: 2020 Mask Production Line N95/FFP2 Mask Installation Dimensions (LxWxH): 8921 x 1494 x 1985 mm Required clearance around the system: 1500 mm all around 50 Hz / 2.6 kVa Pressure: 6 bar Weight approx.: 2500 kg FFP2 masks consist of 3–6 layers of nonwoven fabric. This machine can produce masks with up to 6 layers. The machine consists of five stations: Station 1: Unwinder Station 2: Nose clip punching and embossing roller welding Station 3.1: Printing and ear loop welding Ndedorm R Hdspfx Agzec Station 3.2: Folding edge alignment Station 4: Contour welding and mask cutting 221025ä

Year of construction: 2012, condition: good (used), Machine has 5600 total spindle hours Datron D 5 Dental - milling machine, Nedpfswvqh Dox Agzjdc year of manufacture 2012, 5-axis simultaneous machining, PC control – Beckhoff, automation / 8 blanks, milling spindle 1.8 kW, spindle speed up to 50,000 rpm, tool holder HSK C 25, 15-position tool changer, rotary and tilting axis, A axis +/- 25°, B axis +/- 45°

Condition: excellent (used), Bruker Ultraflex Ndsdpfx Agorit Injzjc TOF/TOF UT0100 G002 11 020 44 02 Mass spectrometer

Condition: used, functionality: unexamined, machine/vehicle number: MPK5000, Used Neon invitrigen Transfection System with Pipette holder. Ndsdpfoxp I Thjx Agzoc Manufacturer: Life Technologies Model: MPK5000 Voltage: 100-240V (50/60Hz)

Condition: refurbished (used), functionality: fully functional, !!! The unit has been calibrated for temperature and CO2. O2 sensor faulty but can be replaced !!! Temperature Control Range: ambient + 3 °C to 55 °C Temperature Deviation (time/spatial): ± 0.1 °C / ± 0.5 °C Ambient Temperature Range: 18 °C to 33 °C CO₂ Measure & Control Range: TC (thermal conductivity) sensor, 0 to 20% CO₂ Control Accuracy: ± 0.1 Nsdpsxbcwfefx Agzodc Humidity (constant): ≥ 95% rH Humidity Fill Amount / Water Quality: maximum 3 (units), distilled or autoclaved water Dimensions (W × H × D): 25.1 × 34.1 × 30.2 in (~ 63.7 × 86.6 × 76.8 cm) Total Volume: 5.4 cubic feet (150 L) Weight: 165 lb (~ 75 kg)

Condition: excellent (used), Year of construction: 2021, operating hours: 3,592 h, functionality: fully functional, Dental Milling Machine Kulzer cara Mill 3.5L PRO+, Coritec 350i Loader PRO+, year of manufacture 2021, 3,592 operating/standby hours, 358 milling hours, spindle cooling unit, water-cooled spindle with 2.6 kW, suitable materials: glass ceramics, PMMA, wax, zirconia, hybrid materials, Ti/CoCr (preform). Application range: veneers, inlays, onlays, crowns, bridge frameworks, bridges, abutments (zirconia and Ti/CoCr preforms), splints, drilling templates, bars, implant structures, and much more. 2.6 kW high-frequency spindle with up to 60,000 rpm (water cooling required), 5-axis machining (3+2 and simultaneous machining), dynamic AC servo motor drives with absolute encoder, solid base frame made of polymer concrete, integrated zero-point clamping system, combined dry and wet machining, high-gloss housing with LED lighting, incl. integrated touchscreen and PC, automatic 20-position tool changer, tool holder 6 mm shank, integrated precision tool length measurement probe, temperature compensation for consistent maximum precision even under ambient temperature fluctuations, extraction system, automatic 8-position blank changer, incl. management software "CNC-Manager", powerful zero-point clamping system, connection: 230 V. The machine was serviced on 21.10.2025 and is immediately ready for use. Nedpfx Agexqnpfezodc

Condition: excellent (used), Memmert drying cabinet Memmert ULE 600 drying cabinet With circulating air. Max. 220°C. Mains connection : 2400w 220 V. 50 Hz. Internal dimensions: 640x800x500 mm. 245 liters - Shelves 1X Scope of delivery: Length: 950 Width: 600 Nodpopq Ttpjfx Agzodc Height: 910mm Weight: 105kg

Year of construction: 2020, condition: used, This listing is for a Pall UF/DF Tangential Flow Filtration System. The unit is in excellent working condition and is ready for immediate release. The Pall UF/DF System is a state-of-the-art tangential flow filtration (TFF) skid designed for ultrafiltration and diafiltration (UF/DF) processes in biopharmaceutical manufacturing. This advanced stainless steel unit enables efficient concentration and buffer exchange of biologics such as monoclonal antibodies, recombinant proteins, enzymes, and gene therapy vectors. Engineered by Pall Biotech and manufactured in Germany, this system ensures process reliability, hygiene, and scalability, meeting the rigorous demands of regulated production environments. Ideal for downstream processing in pilot or GMP production, this system features a user-friendly HMI interface, robust control panel, and a fully integrated filtration circuit compatible with single-use or reusable membranes. Key Features GMP-Ready Design – Engineered to support pharmaceutical-grade UF/DF processes. Integrated Touchscreen HMI – For real-time control and monitoring of process parameters. Compact Stainless Steel Skid – Easy to manoeuvre and install in classified cleanroom environments. Automated Operation – Equipped with an intelligent PLC for pressure, flow, and temperature control. Multi-Function System – Supports both ultrafiltration and diafiltration processes. High Purity Tubing & Fittings – Configured with sanitary connections and single-use flexibility. Validated Safety Features – Includes emergency stop button, regulated pressure alarms, and lockable panels. Technical Specifications Parameter Details Manufacturer Pall Biotech (Germany) Year of Manufacture 2020 System Type UF/DF Skid (Ultrafiltration/Diafiltration) Max Allowable Pressure 4 bar (58 psi) Max Operating Temperature 80°C Min Operating Temperature 5°C Control System Touchscreen HMI with integrated PLC Construction 316L Stainless Steel Wheels Lockable castors for mobility CE Marking Yes (Compliant with EU standards) Serial Number Applications Biopharmaceutical Manufacturing – Concentration and buffer exchange for drug substances. Monoclonal Antibody Purification – Clarification and polishing prior to formulation. Gene Therapy & Vaccines – Processing of viral vectors, plasmid DNA, and mRNA. Enzyme and Protein Products – Downstream UF/DF concentration steps. Cell Culture Harvesting – Clarification of lysates and spent media. Formulation – Final buffer exchange before sterile filtration and fill/finish. Njdpfexl D Awox Agzjdc Benefits Scalable Solution – Suitable for pilot-scale and full production batches. Reliable Filtration – Maintains membrane integrity and product quality. Process Efficiency – Fast changeover with user-friendly operation. High Product Recovery – Designed to minimize hold-up volume and product loss. Validated Platform – Developed by Pall, a global leader in bioprocessing technology.

Condition: used, functionality: unexamined, PMS Lasair II Particle Measurement System Ndsdpfx Agexp I Ewjzec Portable Particle Counter Particle Sizes Measured (µm): 0.5, 5.0 Power: 100-240 VAC, 50-60 Hz, 1.25A For sale per piece

Condition: ready for operation (used), Features: Maximum speed 15,000 rpm (depending on rotor) Minimum speed Nodpfx Asxqq R Ssgzsdc 300 rpm Maximum RCF 21,885 x g (microliter rotor) Temperature set range -9°C to +40°C Run time Standard mode: 1 min - 9 h 59 min, hold = permanent Extended mode: 1 min - 99 h, hold Power rating 120V, 60Hz, 12A Power consumption 1220W Dimensions (W x D x H) 29 x 26 x 14.5 in Weight ~288 lb (~130 kg) Comes with a Heraeus Autoclavable rotor, on the pictures. Good working condition. Please check out our other listings as well.

Condition: used, functionality: fully functional, We offer for sale a Heraeus T 5050 E /ct1974 in excellent condition Drying cabinet, industrial oven. Ventilated oven with 2 shelves. Nominal temperature max: 250°C volume approx. 180 liters Power: 2000W. 1 phase 50Hz Dimensions Interior 50x49x50 cm., housing: 79x56.5x65.5 cm. With Heraeus kelvitron controller Nedsugtz Ropfx Agzjdc - with continuous/timer function. Temperature protection DIN 12880 Protection class: IP20

Year of construction: 2014, condition: used, This listing is for a 3M Zeta Plus 16EZA Encapsulated System Holder The unit is in excellent working condition and is ready for immediate release. The 3M Encapsulated System Holder is engineered to support Zeta Plus depth filtration and related downstream purification processes with optimal ergonomics, hygiene, and operational efficiency. It is specifically designed for biopharmaceutical and biotechnology applications where sterile, high-throughput filtration is required. This system holder accommodates encapsulated filter capsules—eliminating the need for a stainless-steel housing—and offers a pivoting, ergonomic frame that enhances operator safety and eases filter change-outs. Key Features Pivoting Holder Design – The housing pivots between horizontal (waist-height) for loading/unloading and vertical for filtration mode, reducing operator strain and minimizing fluid spills during replacement. Vertical Flow Path Retained – Preserves the proven vertical flow design ideal for depth filtration with 3M Zeta Plus filters and compatibility with 3M polisher or chromatographic clarifiers. Torque-Limiter Sealing – Built-in torque limiter ensures the capsule shell is properly sealed before operation, protecting against leaks or misassembly. Encapsulated Shell Architecture – Eliminates the need for an external stainless-steel cartridge housing, thereby reducing facility clean‑in‑place (CIP) or validation overhead. Shell Options – Offers translucent polycarbonate shells for visual liquid level monitoring or polyphenylene oxide shells capable of sterilization and sanitization. Multiple Flow Configurations Supported – Enables Bottom-In / Bottom-Out and Top-In / Bottom-Out modes to optimize media usage and filter performance. Scalable Modules – Available in pilot and full-production configurations, facilitating scale‑up from lab to manufacturing scale within a unified system design. Technical Specifications Parameter Description Model / Part No. Housing 16EZA1 Flow Path Vertical flow design, compatible with multiple flow directions Shell Materials Polycarbonate or polyphenylene oxide options (sterilizable) Holder Orientation Pivoting between horizontal (load/unload) & vertical (operational) Sealing Mechanism Torque‑limiter style sealing indicator Operational Scale Supports systems from small pilot scale up to production scale (0.5 L to >2,500 L) Filtration Compatibility 3M Zeta Plus depth filters, 3M Polisher ST, 3M Emphaze AEX Hybrid Purifier, 3M Harvest RC, etc. Footprint Compact vertical footprint; reduced spatial demand in filtration suites Applications Clarification of mammalian cell cultures prior to downstream purification Protection of downstream membranes and chromatography resins via depth filtration Clarification of bacterial, yeast, or insect cell lysates Removal of host cell proteins (HCP), DNA, endotoxins, and particulates Pre‑polishing or polishing after capture chromatography Ndjdpfx Agsxl Dy Nozsc Viral clearance modes in downstream workflows Benefits & Value Proposition Enhanced Ergonomics & Safety – The pivoting design reduces the need to lift used capsules overhead, lowering risk of spills and operator fatigue. Lower Validation Burden – Because the system is fully encapsulated, no external housing cleaning or validation is needed in the customer’s site. Operational Versatility – Flexibility in shell types, flow configurations, and scale continuity from pilot to production. Visual Process Monitoring – Translucent shell...

Condition: ready for operation (used), Features Operating range -25 °C to 150 °C Precise temperature control Overtemperature and low level protection Safety class III/FL (DIN 12876) Powerful pressure/suction pump Programmer with calendar and clock functions Ndodpfx Aoxqq Nnsgzec 2-point calibration Pt100 sensor connection Natural refrigerant Weight 25 kg

Year of construction: 2008, condition: good (used), 2008 Philips Mammo Diagnost (re-badged Siemens Mammomat 3000) Mammography system for screening and diagnostics.First installed 03 2008 Analog Mammography system calibrated for CR with an 18x24 bucky, Anode: Mo Filters: Mo/Rh Grid table: Philips 18x24cm ,Philips 24x30cm Face shield: Standard 16cm, Long 21cm Carbon fibre table /mag table: 1,5 18x24 Siemens Carbon fibre table/ mag table 1,8 18x24 Philips Spot kompression plate 1,8 Philips Spot kompression plate 1,5 Siemens compression plate 1,5 Siemens Nodpsdqil Aofx Agzodc compression plate 1,8 Philips Xbpcno7r Compression paddles: 18x24 cm high edge Philips Axillae paddle 21cm x 9cm , 28x27x9 cm Contact spot compression 8cm Magnification table x1.8 This system is in very good cosmetic and functional condition. It has been professionally deinstalled and is available for immediate sale. carbon fibre table mag table plate

Condition: used, This listing is for a Millipore Pro Flux M30 Tangential Flow Filtration (TFF) System. The unit is in full working condition and is ready for immediate release. The Millipore Pro Flux M30 is a high-performance tangential flow filtration (TFF) system designed for demanding applications in the biotechnology, pharmaceutical, and molecular diagnostics sectors. Optimized for crossflow filtration, the M30 provides reliable separation, concentration, and clarification of biomolecules and cell suspensions in both R&D and process-scale environments. With its robust stainless steel construction, precise transmembrane pressure (TMP) control, and compatibility with a wide range of membrane chemistries, the M30 delivers consistent performance across various filtration tasks—from protein concentration and virus clarification to cell culture harvest and synthetic biology sample prep. Key Features Stainless Steel Construction – Durable, sanitary design for aseptic operation and long-term reliability. Optimized TMP Control – Ensures maximum membrane efficiency and longevity through precise pressure regulation. Broad Membrane Compatibility – Supports a variety of membrane types and molecular weight cut-offs for flexible application use. Process Versatility – Suitable for concentration, diafiltration, and clarification steps in upstream and downstream workflows. Compact & Scalable – Ideal for laboratory-scale operations with scalability to pilot and production environments. User-Friendly Interface – Intuitive controls and gauges for straightforward operation and monitoring. Technical Specifications Model: Pro Flux M30 Flow Configuration: Tangential Flow / Crossflow Material of Construction: 316L Stainless Steel Pump Type: Peristaltic or Diaphragm (depending on setup) Pressure Control: Manual and/or automated transmembrane pressure regulation Operating Pressure Range: Typically up to 4 bar (60 psi) Filter Compatibility: Millipore Pellicon, Ultracel, Durapore, and other cassettes Tubing & Fittings: Sanitary-grade with tri-clamp or Luer lock connections Footprint: Compact benchtop design Manufacturer: Millipore (now part of Merck Millipore) Applications Biopharmaceutical Processing – Protein concentration, buffer exchange, and virus removal. Cell Culture Harvesting – Clarification of cell suspensions post-fermentation or bioreactor. Synthetic Biology – Preparation of cell-free extracts, nucleic acid concentration, and purification. Gene Editing & Molecular Cloning – Sample concentration and buffer exchange before downstream analysis. Diagnostics Manufacturing – Filtration of assay components and reagent prep for diagnostic kits. Fluorescence & Imaging Sample Prep – Ensures clean, debris-free samples for accurate analysis. Benefits Reliable Performance – Delivers consistent and reproducible results for critical bioprocess steps. Process Flexibility – Adaptable to a wide range of biomolecule sizes and sample types. Aseptic Operation – Designed for cleanroom and GMP environments. Low Hold-Up Volume – Minimizes product loss during filtration. Ndodpfsxl Dx Sex Agzjc Trusted Brand – Developed by Millipore, a global leader in membrane filtration technologies.

Condition: ready for operation (used), The CERTOMAT® RM is a powerful and robust orbital benchtop shaker for the universal use in the various tasks of biological and chemical laboratories. Its compact design and its construction features allow its placement in incubators, conditioning cabinets or in shelves of a rack. The product also features an adjustable counter weight for mass balancing of the different loads applied; for optimum compensation (minimization) of vibrations caused by different loads driven at different shaking frequencies, which can be transmitted to the shaker unit and woking place. Ndodpfjxqq Epsx Agzjc Specification: Cabinet size (W x H x D): 511 x 160 x 545 mm Weight (without tray): 46 kg Material: sheet steel case with acidproof varnish Max. load: depending on tray and mounting system applied Connector: Home-Office grounded plug, separate cable of about 3 m Mains supply: 230 V / 50 – 60 Hz or 115 V / 50 – 60 Hz Power consumption: 0.8 mA at 230 V or 1.6 A at 115 V Fuses: fuse links 2 x T 1 A (230 V) or 2 x T 2 A (115 V) Shaking frequencies: 40… 400 rpm Orbital motion: 25 mm or 50 mm, depending on version “as delivered“ Rotation speed accuracy: max. Deviation ±1% from max setting Timer operation: 00:01 [hrs:min] – 98:59 [hrs:min] ; 99:59 [hrs:min] continuous operation Ambient temperature: +10 … +60 degree C Ambient humidity: 10… 90%, not condensing Good working condition. Please check out our other listings as well.

Condition: used, This listing is for a Pall Allegro 200 L Single‑Use Mixer System. The unit is in full working condition and is ready for immediate release. The Pall Allegro 200 L single‑use mixer (model LGRMXTTE200L230B) is engineered for scalable, robust mixing in biopharmaceutical operations. It is part of Pall’s Allegro single‑use technology portfolio and is designed for applications from media and buffer preparation through final formulation. Built with proven engineering principles and compatibility with Pall’s Allegro biocontainer film formats, it offers ease-of-use, reproducible performance, and minimal validation burden. Key Features 4‑Pitch Blade Impeller – Effective, low-shear mixing over a broad range of conditions. Bidirectional Flow Capability – Able to run clockwise (up‑flow) or counterclockwise (down‑flow), accommodating different density fluids and solids. Bag Inflation System – Mixer bag inflation provides a controlled mixing envelope, allowing consistent performance across 50–200 L volumes, and supports gas blanketing. Flush Drain Valve – Helps avoid dead legs by removing settled materials that might otherwise be left unagitated. Retention of Allegro Film Materials – Uses the same film as standard Allegro 2D/3D biocontainers for material consistency, reducing requalification effort. Optional Baffle Kit – To mitigate air entrapment at higher rotational speeds for shear-sensitive processes. Technical Specifications Parameter Value Model / Part Number LGRMXTTE200L230B Operating Volume Range 50 – 200 L Voltage / Frequency 230 V AC, 50 Hz Nedpfexl Dxlsx Agzjdc Current Draw ~5.1 A Motor Power 0.37 kW Rotation Speed Range 50 – 200 rpm Materials of Construction Mixer tote in 304 stainless steel; film, manifolds, ports in LDPE / PS / silicone etc. Weight (empty system) ~120 kg Footprint (W × D) 1,054 mm × 748 mm Height 1,378 mm Gas Supply Requirements 4 – 6 barg (for bag inflation / blanket) Operating Temperature Range 4 – 40 °C Connections / Ports Inlet, gas inflation, exhaust, flush drain, powder addition ports etc. Applications Upstream Media Preparation – Efficient mixing of culture media and supplements. Downstream Buffer Preparation – Rapid homogenization of buffers or reagents. Final Formulation / Filling – Gentle mixing for drug products. Powder Addition / Reconstitution – Capable of handling solid-liquid mixing (e.g. powders) with repeatability. Shear-Sensitive Biologics – Low shear impeller design suitable for sensitive proteins or biologics. Benefits & Validation High Performance Mixing across Conditions – Demonstrated capability to mix a wide range of systems including liquid-liquid, solid-liquid, and viscous solutions with good speed and uniformity. Validated Materials & Safety – Components meet USP /, USP , , endotoxin limits, gamma-irradiation compatibility (up to 50 kGy), and leak-tested containers. Reduced Validation Overhead – Using the same film materials as existing Allegro biocontainers helps streamline requalification and process transfer. Minimal Dead Volume / Entrapment – Flush drain valve and optional baffles help prevent accumulation of settled solids. Scalable & Flexible – Supports operations from 50 L to 200 L with consistent mixing performance.

Condition: used, This listing is for a Pall Allegro 50 L Standard Mixer and Weigh Platform. The unit is in full working condition and is ready for immediate release. The Pall Allegro 50 L Standard Mixer and Weigh Platform is a robust and versatile solution designed for single-use bioprocessing applications in the pharmaceutical and biotechnology industries. Engineered for consistent mixing performance, this system supports critical upstream and downstream operations including buffer preparation, media mixing, and formulation processes. Nedpfx Agjxl Dpdozsdc This platform integrates high-precision weighing functionality with a reliable mixing system, offering enhanced process control in a compact, easy-to-clean stainless steel frame. Its compatibility with Pall Allegro single-use mixers ensures operational flexibility and sterility assurance across various applications. Key Features Integrated Design – Combines mixing and weighing in one streamlined system. Single-Use Compatible – Fully compatible with Pall Allegro 2D mixer bags. High Accuracy Weighing – Precision load cells for reliable mass control and batch documentation. User-Friendly Interface – Easy-to-use control panel with adjustable speed and mixing profiles. Hygienic Construction – Stainless steel frame with smooth surfaces for GMP compliance. Scalable Solution – Ideal for pilot-scale to small-scale commercial production. Technical Specifications Model: Allegro 50 L Standard Mixer & Weigh Platform Mixing Volume: Up to 50 liters Mixer Type: Magnetically driven impeller Platform Material: 304 Stainless Steel Weight Capacity: Up to 100 kg Dimensions (approx.): 600 mm x 600 mm x 1100 mm Power Supply: 100–240 V AC / 50–60 Hz Control System: Integrated touch screen interface Manufacturer: Pall Corporation Applications Biopharmaceutical Manufacturing – Media and buffer prep, formulation, and hold steps. Clinical Manufacturing – Flexible use in small-scale GMP operations. Vaccine Production – Sterile formulation and component mixing. Gene & Cell Therapy – Supports sterile, closed-system processing. Process Development Labs – Ideal for scaling up single-use technologies. Benefits Sterile Processing – Supports single-use bags to minimize contamination risk. Compact Footprint – Fits easily into lab and production environments. Accurate Dosing – Integrated weigh system for precise process control. Reduced Cleaning Time – No need for CIP/SIP due to disposable mixer bags. Pall Quality – Developed by a trusted leader in bioprocessing technologies.