Condition: used, machine/vehicle number: 684, Load capacity: 1000 kg Lredpfx Aedqw R Regzou Graduation reading: 100 g Platform size: 1250 x 950 mm Platform height above floor: 230 mm Platform height with elevation from the underbody: 540 mm Space required: 1250 x 1160/1250 x 1900/2180 mm Weight: 270 kg

Condition: good (used), Year of construction: 2002, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The Lredpfx Asw N S E Aegzeu measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: excellent (used), Year of construction: 2019, Machine type: Tool presetting device Model: UNO 20/40 Manufacturer: Haimer Year of manufacture: 2019 Location: Germany Lredpfx Agsxqq Eijzsu

Condition: ready for operation (used), Year of construction: 2010, Main Drive Number of axis 3 Movement X-Axis Movement 800 mm Y-Axis Movement 1000 mm Z-Axis Movement 700 mm Additional Equipment Lrjdjxcb Rgspfx Agzsu Probes: 2 included This 3-axis Wenzel XO 87 was manufactured in 2010. It features a robust CMM machine design with X-axis travel of 800mm, Y-axis at 1000mm, and Z-axis at 700mm. If you are looking to get high-quality measuring capabilities, consider the Wenzel XO 87 machine we have for sale. Contact us for more information. Application Types Measuring

Condition: good (used), Year of construction: 2013, Ref. -No.: 10528 Manufacturer: RöMER Type: HEXAGON INFINITE 2.0 Year of construction: 2013 Storage location: Halberstadt Country of origin: Germany Lrjdpjxqd Dxjfx Agzou Measuring length: 2000 mm

Condition: used, Year of construction: 2010, Mobile measuring articulated arm, measuring machine, measuring device Manufacturer: Zett Mess Type: AMPG 2400 Precision Year of manufacture: 2010 - unused Lodpfx Agjwu E D Rezsru Measuring diameter: 2,400 mm 221025ä

Condition: excellent (used), Year of construction: 2005, It is a precision measuring device for simple and fast measurement of through-hole drills and blind drills of burrs and end mills. This device is indispensable as basic equipment for modern tool shops, sharpening shops and CNC machine operators. The equipment is used in the woodworking and metalworking industries, as well as in glass and stone processing. Everywhere where tool inspection is required. It allows checking the dimensions of the tool its radii or profile and the quality of the cutting surfaces. - measuring range: - Z axis 370 mm - X axis 115 mm - Total weight: about 200 kg Ljdpfsu Sbpcsx Agzjru

Condition: good (used), Year of construction: 2004, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: Ljdpsul Efmsfx Agzeru The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Year of construction: 2019, condition: excellent (used), image guided 3D coordinate measuring machine Manufacturer: Keyence Lrsdpfx Agsih R Uxjzsu Type: XM-1200 Series Year of manufacture: 2019 Control: Keyence Technical Data: ----- - Camera chip: 4 MP CMOS - Measuring range: 600 x 300 x 200 mm - Smallest display unit: 1 µm - Smallest angle: 0.0001 - Repeatability (locked): ±3 µm - Max. table load: 25 kg - Display: 15" TFT - Weight: 40 Kg Accessories: ----- - manuals - analog delivery condition (data sheet attached)

Year of construction: 2019, condition: ready for operation (used), Additional Equipment Measuring head incl. 1 measuring probe with probe tip (4mm) Ljdpjxpyrpefx Agzjru Measuring head incl. 1 measuring probe with probe tip (4mm) CAD add-on software Extension cable Mouse, keyboard, and user manual in English and German This KEYENCE XM-1000 was manufactured in 2019. A reliable CMM machine, it offers precise dimensional measurement for quality control in manufacturing. Consider the opportunity to buy this KEYENCE XM-1000 CMM machine. Contact us for more information about this machine. Application Types Measuring

Year of construction: 2019, condition: like new (used), overall weight: 100 kg, total height: 860 mm, space requirement length: 560 mm, space requirement width: 660 mm, CONTROLS .. electronic controls ELECTRICAL SPECIFICATIONS .. mains voltage: 240 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 560 mm .. space requirements -front/back-: 660 mm .. total height: 860 mm .. total weight approx.: 100 kg Optical measuring machine for testing diameter, shape, roundness, angle, cylindricity, bending radius, and length. Measuring range: Ø 8 x 100 mm Max. workpiece dimensions: Ø 90 x 260 mm Max. workpiece weight: 3 kg Repeatability (diameter) at 20°C: 0.4 µm Repeatability (length) at 20°C: 3 µm Max. travel speed (vertical): 20 mm/s Lrjdpfx Agjxp A Ruozeu Max. rotation speed: 180 °/s

Condition: good (used), Counting scale make TOLEDO type 4652 Technical data: Maximum load 20 kg counting function 1:9 / 1:99 external dimensions approx. 650 x 350 x 600 mm Lrodpfx Asikbg Hegzou

Condition: good (used), Year of construction: 2012, ITW BÜHLER WILSON HARDNESS TESTER SuperRockwell Hardness Testing Device BRIRO RK-Automatic Year of manufacture: 2012 Test height: 0-235 mm Throat depth: 145 mm with HM-Control evaluation system Ljdpfx Aexnpvzjgzjru with RS-232 data interface for data transfer with settings for HR15N; HR30N; HR45N; HR15T; HR30T; HR45T used Weight: 150 kg

Condition: excellent (used), For sale: Precision electronic micrometer ATORN 25–50 mm, mounted on a robust cast iron stand. Ready for use in production, workshop, or metrological environments. Very good condition – unit has been tested, display works flawlessly, measurement is precise and repeatable. Ledpfjw Rdgbox Agzeru Micrometer technical specifications: • Range: 25–50 mm (1–2”) • Accuracy: 0.001 mm (0.00005”) • Model: Atorn 3 040 2002 • Functions: PR, mm/inch, ABS/REL, zeroing • Large, easy-to-read LCD display • Original industrial-grade ATORN micrometer (high quality, comparable to Mitutoyo or Mahr) Measurement stand included: • Solid cast iron base • Two-axis adjustment • Ideal for precise positioning of workpieces

Condition: excellent (used), quality grade 1 Lrsdpfx Aju Dpayjgzsu

Year of construction: 2023, condition: ready for operation (used), General Data Measurements width 710 mm Measurements depth 1385 mm Measurements height 1565 mm Machine weight 350 kg Lsdpexn Dkyofx Agzjru Main Drive Spindle speed range 1500–3000 Movement X-Axis Movement 200 mm Y-Axis Movement 100 mm Z-Axis Movement 75 mm Table Table load 7.5 kg This KEYENCE 8030T optical measurement machine was manufactured in 2023. It features a 1" 20-megapixel CMOS image sensor, a 12.1" LCD display, and dual telecentric lens optics. The machine offers a wide-field measuring range of 300 × 200 mm and a high-precision range of 225 × 125 mm. It supports various interfaces including LAN and USB ports, and operates within ambient conditions of 10–35 °C. For more information about this machine, please reach out to us. Application Types Measuring

Year of construction: 2024, condition: ready for operation (used), - USED - 3D MEASURING MACHINE NOTE: PORTABLE 7-AXIS 3D MEASURING ARM, MAX DIAMETER 2000mm, WITH PIECE TOUCH DETECTOR, TRESTLE AND PC Lrsdsxcqraepfx Agzju

Condition: excellent (used), Product advantage: Product name: Outer diameter micrometer Specification: 25-50mm Resolution: 0.001mm Metric conversion Product process: surface spray Scaling process: laser scaling Ledpfxjqgc R Re Agzeru Multifunction dual-use type: digital display plus scale

Condition: good (used), Calipers, calipers, calipers -Measuring range: 0-350 mm Lrjdpfx Aged N N Dnozju -Price: per piece -Number: 1x calipers available -Dimensions: 385/127/H10 mm -Weight: 0.4 kg

Condition: used, x-travel 1500 mm y-travel 1000 mm z-travel 900 mm weight 1,2 kg dimensions 260 x 168 x 80 mm Used 3-axis digital display from Mitutoyo with three scales. The digital one Measuring device was dismantled because the machine - a table boring machine - Ljdpfx Ajvdfmrjgzoru was disposed of. Display area. 0.005, 0.001mm. Hole circle display, distance processing, Conversion to lathe operation possible, programmable parameters.

Condition: ready for operation (used), Year of construction: 2016, Main Drive Number of axis 5 Movement X-Axis Movement 800 mm Y-Axis Movement 1500 mm Z-Axis Movement 700 mm Additional Equipment Renishaw PH10M Plus head Air Supply: Clean compressed air required Ambient Temperature: Stable temperature (20 °C ±1 °C) required Lsdpfx Ajxllpljgzsru This 5-axis LEADER Miracle NC8157 was manufactured in 2016. It features a Renishaw PH10M Plus head and a range of 1500x800x700 mm, fully calibrated for precise measurements. Consider the opportunity to buy this LEADER Miracle NC8157 CMM machine. Contact us for more information. Application Types Measuring

Condition: ready for operation (used), - USED - 3D MEASURING MACHINE X-AXIS TRAVEL: 3000 mm Y-AXIS TRAVEL: 2000 mm Z-AXIS TRAVEL: 1200 mm TABLE SIZE: 3000 x 1500 mm NOTE: TOUCH PROBE RENISHAW MH8/TP2 Lrsdpfx Agowt Euyezeu

Condition: used, brinell hardness 250 kg rockwell hardness 150 kg Lrsdpfxsuvd Hds Agzsu throat 125 mm workpiece height max. 200 mm weight of the machine ca. 70 kg dimensions of the machine ca. 400 x 200 x 700 mm Test load: 62,5 / 100 / 150 / 187,5 / 250 nell Dto. 100 und 150 kg Rockwell. Device untested because we are not familiar with it. Machine dealer with own stock of 1600 m².

Year of construction: 2017, condition: ready for operation (used), - USED - 3D SCANNING SYSTEM MEASURING MACHINE Lrjdpfjvhc Unex Agzeu TABLE SIZE: 250 - 500 mm NOTE: RESOLUTION 2448X2050; MEASURING TIME 1 SEC; SENSOR POSITIONNING ON TRIPOD; COMPUTER DELL M7710; SOFTWARE DONGLE SW COLIN 3D

Year of construction: 2010, condition: ready for operation (used), - USED - 3D MEASURING MACHINE X-AXIS TRAVEL: 1320 mm Y-AXIS TRAVEL: 970 mm Lrjdpfxsvhc T Re Agzeu Z-AXIS TRAVEL: 610 mm CAPACITY: 800 Kg WEIGHT: 3800 Kg OVERALL DIMENSIONS: 2338 x 1575 x 3157 mm