Condition: used, Year of construction: 2003, x-travel 800 mm y-travel 700 mm z-travel 600 mm turning speeds 12000 1 U/min Nedpfx Agorc Ip Iszjdc control Heidenhain total power requirement 59 kW weight of the machine ca. 10,6 t

Condition: used, Year of construction: 2010, x-travel 600 mm y-travel 855 mm z-travel 750 mm Control Heidenhain Ndedpfx Asxq Hk Isgzjc spindle tunring speed 18.000 U/min tool taper HSK A63 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2009, x-travel 500 mm y-travel 250 mm z-travel 400 mm CNC-control Mitsubishi M70 Table dimensions Ø 250 mm max. table load 60 kg spindle taper HSK 63 spindle turning speed range 20 - 12.000 U/min spindle motor 7,5 kW feed range max. 10.000 mm/min rapid traverse 48 / 60 / 72 m/min tool change unit 24 Pos. coolant IKZ voltage 400 V c-axis 360 0 b-axis ° total power requirement 25 kW Ndsdpjxq Hgiefx Agzoc weight of the machine ca. 5,0 t dimensions of the machine ca. 1,90 x 2,70 x 2,85 m - Serial No.: RM10090 Axis CNC-Control (5-side machining with single clamping) – Central lubrication – Internal coolant through spindle TSC – Spindel oil chiller – working light – electronic hand wheel

Condition: good (used), Tool setting device, tool presetting device, cutter setting device Nsdpfsdthyyjx Agzjdc -Presetting device for: milling tools -maximum hob diameter: 500 mm -maximum height of the cutters: 500 mm -Dimensions: 800/400/H1600 mm -Weight: 242 kg

Condition: excellent (used), Year of construction: 2016, x-travel 950 mm y-travel 850 mm z-travel 650 mm Control HEIDENHAIN TNC 640 spindle turning speed range 20000 U/min tool taper HSK-A 63 coolant IKZ 40 bar swivable table: 850 x 750 mm c-axis 360° tool change unit 60 Pos. weight of the machine ca. 14 t This DMG DMU 95 monoBLOCK is in very good condition and is available immediately: ACCESSORIES included: - 75 HSK-A63 chucks - Tool trolley - SCHUNK zero point system with: 1 base plate 4 interchangeable tables (plates) 1 vice plate 16 columns Technical data: Clamping surface table C-axis: 850 x 750 mm Clamping surface rigid table: 1,000 x 750 mm Control: 3D control HEIDENHAIN TNC 640 Spindle speed: 20,000 rpm Spindle power: 35 kW (40% ED) / 25 kW (100% ED) Tool holder: HSK-A 63 according to DIN 69893 Tool changing device: Double gripper Magazine slots: 60 (chain magazine) Connected load: 50 kVA Ndjdpfx Agsvwgrpjzoc Coolant system IKZ: 40 bar / 23 l/min through spindle centre (AD) External coolant supply: 4 bar / 40 l/min EQUIPMENT and DESCRIPTION - MPC Machine Protection Control chip tray with integrated coolant tank 500 l - Scraper belt chip conveyor with coolant system 600 litres, paper belt filter - Infrared measuring probe HEIDENHAIN TS 649 - 3D quickSET extension package - Coolant ring nozzle for vertical headstock, 15 water nozzles, 5 air nozzles - Flushing gun with pump 2 bar / 40 l/min - Cooling device Blast air through spindle centre, selectable via M function - Operating mode 4 - Manual intervention with open work area doors - Documentation

Condition: used, Year of construction: 2000, x-travel 800 mm y-travel 600 mm z-travel 500 mm table surface area 1000 x 560 mm spindle taper HSK 63 A spindle turning speed - stepless 20 - 16.000 U/min spindle power 15 kW max. torque on the spindle 9 Nm Ndodpfx Agexq Hf Sozjc feeds x/y/z -stepless 1 - 30.000 mm/min rapid traverse 35 m/min feed power 8000 N ATC 30 Stationen control HEIDENHAIN, TNC 430 total power requirement 32 kVA weight of the machine ca. 7,2 t dimensions of machine L x W x H 2,75 x 2,30 x 2,95 m Accessories: HEIDENHAIN probe TS 632, various tool fixtures, chip conveyor, coolant

Year of construction: 2001, condition: used, M01.43870 frequency 50 Hz voltage 400 V 24 V connected load 48 kW rated current 63 A control Siemens 840 D turning diameter 250 mm turning length 100 mm weight of the machine ca. 7,5 t turning length external / innen 100 mm workpiece length - min. 29 mm Nsdjrc Ip Sepfx Agzedc workpiece length - max. 100 mm

Condition: excellent (used), Year of construction: 2012, operating hours: 18,648 h, CNC controller: Heidenhain ITCN 530 ERGOline Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360° (0,001º) B-axis degrees: –5° a +110° (0,001º) Rapid traverse m/min: 24 Worktable Ndedpfsw Rnxzox Agzec Table dimensions mm: 630 x 500 Maximum workpiece size (D x H) mm: 500 x 400 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18.000 Spindle drive power kW: 13 / 9 KW (40 / 100% ED) Tool system Tool holder: SK 40 Tool magazine slots: 30 Max. Tool Length mm: 300 Max tool weight kg: 6 Equipment Chip conveyor Workarea light Paper band filter Rotating viewing window with laminated glass Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 L Machine running times Under power: 18.648 Rated power kVA: 34 Operating Time: 6.226 Basic machine dimensions / weight Length mm: 2.800 Width mm: 2.800 Height mm: 2.600 Weight kg: 4.450

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, controller manufacturer: Siemens, controller model: 840D SL, table load: 500 kg, rotary table diameter: 650 mm, spindle speed (max.): 12,000 rpm, coolant supply: 22 bar, 5-Axis Machining Center Manufacturer: Spinner Model: U5-620 Year of manufacture: 2014 Control: Siemens 840DE SL + ShopMill Operating hours: n/a Spindle hours: n/a S/N: XXXXX Technical specifications: ----- • Travel X-Y-Z: 620 x 520 x 460 mm • C-axis: 360° • B-axis: -90°/+110° • Swiveling rotary table Ø650(500) mm • Rotary table load capacity: max. 500 kg • Spindle speed: 12,000 rpm • Magazine: 32x SK-40 • Coolant system 22 bar incl. through-spindle coolant, bed flushing, paper band filter with 350L additional tank capacity • Direct optical measurement systems on rotary axes • Electronic thermal sensors for length expansion compensation of milling spindle • Option: Increased rapid traverse (48 m/min) • Option: Glass scales on X-Y-Z • Option: Fully enclosed machine (top) • Option: Sinumerik MDynamics • LED work area lighting • 3D wireless probe • Chip tray • Machine weight: approx. 7.5 t • Dimensions: 3,500 x 3,500 x 2,800 mm Accessories: ----- • Documentation • Rinse gun • Electronic handwheel • Work area extraction system Availability: December 2025 Nodpfjxqyugex Agzjdc

Condition: used, Year of construction: 2017, Table size: 4000x1200 mm, universal milling head: 360°, coolant system and internal cooling through the spindle, chip conveyor, 24-position tool changer, CNC control, manufacturer: HEIDENHAIN, model: TNC 530, with rotary table, PHV 600, diameter: 700 mm, tool holder: SK50, travel distances: X-axis: 3000 mm, Y-axis: 1200 mm, Z-axis: 1500 mm, table load capacity: 9 tons, tailstock. Ndsdpfxoxpy D Se Agzsc

Condition: excellent (used), Year of construction: 2000, operating hours: 1,600 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, rotational speed (max.): 6,300 rpm, overall weight: 5,500 kg, spindle speed (max.): 6,300 rpm, Universal Machining Center Deckel Maho DMU 80T Year of manufacture: 2000 Control: Heidenhain Operating hours: approx. 1,600 h Technical specifications: Spindle speed: 0 - 6,300 rpm Spindle torque: Tool holder: SK 40 Magazine capacity: 24 positions X-axis: 800 mm Y-axis: 650 mm Z-axis: 550 mm Nedpfx Aswq Dmcegzsdc Equipment: - Coolant system (KSS) - 30 SK 40 tool holders - 1x machine vice The machine is in very good condition and has seen very little use.

Condition: used, Year of construction: 2002, x-travel 3.000 mm y-travel 800 mm z-travel 800 mm Control Heidenhain iTNC 530 turning speed range 20 - 15.000 U/min max. drive power 23 kW max. torque 127 Nm tool taper SK 40 number of tool places 48 Pos. Ndjdpfx Agoxp R Emszec In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - 3-degree swivel head pitch - 40 bar internal coolant supply - Direct measuring system Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 1996, x-travel 850 mm y-travel 630 mm z-travel 500 mm Njdpfjuxfz Ajx Agzsdc Control Heidenhain total power requirement 16 kW dimensions of the machine ca. 5 x 4,2 m

Condition: ready for operation (used), Year of construction: 2006, General Data Machine weight 18000 kg Main Drive Spindle speed range 17500 Number of axis 5 Movement X-Axis Movement 600 mm X-Axis Rapid Traverse 45 m/min Y-Axis Movement 600 (975) mm Y-Axis Rapid Traverse 45 m/min Z-Axis Movement 500 mm Z-Axis Rapid Traverse 45 m/min Tools Type of tool holder HSK A63 Media Chip conveyor Yes Additional Equipment Double Tool Change Table 2 Swivel Units for Clamping Bridge 2 NC-Controlled Swivel Units 4 NC-Controlled Rotary Tables KNOLL Coolant System Nsdpsxqibpjfx Agzjdc 70 Bar High-Pressure Pump Chip Conveyor This 5-axis EMAG BAW 06-22 double-spindle machining center in 5-axis design (on both sides) was manufactured in 2006. It features double spindle machining, a 600 mm spindle distance, and X/Y/Z travels of 600/975/500 mm. The machine includes a high-speed milling spindle at 17,500 rpm, dual 72-unit tool magazines, and a robust HSK A63 tool holder. Additional features include a KNOLL coolant system, 70 bar high-pressure pump, and a chip conveyor. If you are looking to get high-quality milling capabilities consider the EMAG BAW 06-22 machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), controller manufacturer: Heidenhain TNC 360, total height: 2,850 mm, total length: 4,800 mm, total width: 2,440 mm, empty load weight: 12,200 kg, Maximale afstand van kolom tot midden van spindel: 1270 mm (diepte van de kiel) Max longitudinal travel X-axe: 3550 mm Max cross-travel Y-axe: 1050 mm Max travel Z-axe: 1016 mm Power on spindle: 15 HP Admission in boring head (ISO): ISO 50 Spindlespeeds: 28 > 1800 rpm Table size: 4100 x 1000 mm Ndodpfev Tan Nsx Agzjc

Condition: excellent (used), Year of construction: 2002, Machining Centre - Universal Deckel Maho DMU 60 T Year of manufacture: 2002 Number of axes: 5 (3+2) Technical specifications: Travel paths: X-axis: 630 mm Y-axis: 560 mm Z-axis: 560 mm Magazine positions: 24 SK 40 NC rotary table integrated into fixed table. Clamping surface: 600 x 1000 mm Diameter: 600 mm Table weight: 800 kg Ndsdpfx Aoxqfw Tegzec Number of T-slots: 8 / 1 T-slot width: 14 H12 / 14 H7 T-slot distance: 63 mm Max. table load: 350 kg Rotatable C: 360° 5 axes - Controlled NC swivel milling head (B axis) - Rotary table integrated into fixed table (C axis)

Condition: good (used), Year of construction: 2013, Ref. -No.: 10450 Manufacturer: SHW Type: UNISPEED 5 Year of construction: 2013 Type of control: CNC Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 32XX X-Travel: 2000 mm Y-Travel: 2300 mm Z-Travel: 1300 mm B-Axis: 360 ° C-Axis: 360 ° W-Axis: 1500 mm Table Load: 15000 kg Max. Tool Weight: 25 kg Max. Tool Length: 500 mm Max. rotary table diameter: 1600 O Table speed range: 5 min/-1 Tool Taper: HSK 100 Tool Piece Magazine With: 150 Pcs./pcs. Turning Speed Range - Stepless: 22 - 8000 RPM Max. Torque: 40 Nm Feed Speeds X/Y/Z Axis: 2 - 30.000 mm / min axes: 5 Rapid Travel X/Y/Z: 30.000 mm / min acceleration: 2 m/s² Dimensions Of The Machine Ca.: 8,4 x 7,1 x 5,3 m Operating hours: 42.499 H Tool change time: 10 s Further information: Ndsdpfexqd Dfex Agzoc automatic universal milling head, 360 x 1°; 180 x1° compact coolant system, make Knoll, type KF150/950 high pressure pump belt filter coolant temperature control Blum laser measuring system Renishaw RMP 60M infrared measuring system 140 tool holders HSK 100 included Machine can be inspected under power by appointment.

Condition: used, Year of construction: 2002, x-travel 2.000 mm y-travel 800 mm z-travel 800 mm Control Heidenhain iTNC 530 Ndedpfxjxpxuco Agzjc table surface area 2.600 x 850 mm spindle tunring speed 12.000 U/min tool taper SK 40 Number of tools 36 St. total power requirement 60 kW weight of the machine ca. 9,5 t dimensions of the machine ca. 4,75 x 3,2 x 3,2 m We believe the machine is in good used condition and can be inspected live by appointment. Technical Features & Accessories: - Controlled head (B-axis +105°) - Integrated rotary table D 630 mm (C-axis) - NC dividing head D 320 mm, SPH 220 mm (A-axis) - Direct position measuring system X, Y, Z, C - Traveling column design - Internal cooling system 20 bar - Chip conveyor - Handwheel - Separate control cabinet - 3D probe - Reinforced Y-axis with 800 mm travel - Higher milling spindle motor power, 190 Nm, thread cutting bit M30 - Full cabin with roof - Operating hours approx. 45,000 h - Spindle hours approx. 12,000 h Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Changes and errors in the technical data and specifications are subject to change without notice. Information and prior sale subject to change!

Condition: used, Year of construction: 1995, tool adaptor SK 40 weight of the machine ca. 2,3 t x-travel 800 mm Ndodpfjnl Nq Uex Agzsc

Condition: ready for operation (used), Year of construction: 2019, operating hours: 24,887 h, Main Drive Number of axis 5 Movement X-Axis Movement 762 mm Y-Axis Movement 508 mm Z-Axis Movement 508 mm Media Chip conveyor Yes Additional Equipment Cooling through the spindle: 69 bar Chip conveyor Excl Robot cell (only available for an extra amount) Exhaust unit SK-40 This 5-axis HAAS UMC-750SS was manufactured in 2019. It features a spindle speed of 15,000 RPM, movements of 762 x 508 x 508 mm, and a 40+1 position tool changer. Additional highlights include cooling through the spindle at 69 bar, a chip conveyor, and an SK-40 taper. Consider the opportunity to buy this HAAS UMC-750SS universal machining centre. Contact us for more information about this machine. Application Types Nsdjxpkuuspfx Agzedc Milling

Condition: ready for operation (used), total height: 2,100 mm, total length: 1,235 mm, total width: 1,500 mm, empty load weight: 1,000 kg, Chevalier FM 3VS X: 762 - Y: 305 - Z: 406 mm Max longitudinal travel X-axe: 762 mm Nodpfexpgfcox Agzsdc Max cross-travel Y-axe: 305 mm Max travel Z-axe: 406 mm Max height workpiece: 70 > 476 mm Power on spindle: 3 HP Admission in boring head (ISO): ISO 30 Spindlespeeds: 3750 rpm Table size: 1220 x 230 mm

Condition: like new (used), Year of construction: 2020, operating hours: 110 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 700 mm, DMG Mori Seiki LaserTec 50 FineCutting Sauer CNC Laser Precision Machine Year/Model: 2019 Control: Celos with Siemens 840D sl Operate CELOS with Siemens 840D sl Operate including 21.5" ERGOline control panel with multi-touch screen CNC laser precision machine with high-speed machining LASERTEC 50 FineCutting for fine laser cutting, laser drilling, laser welding NC swivel rotary table, highly dynamic and precise Travel paths: 500 mm x 500 mm x 700 mm Integrated ytterbium continuous wave (cw) fiber laser 450 W QCW ytterbium fiber laser with 4500 W pulse peak power and 450 W average power Processing head (80 mm focal length), 5-axis transformation 100 working hours (as new) Included: Fanuc robotic automation + Keller automatic extraction system Nodpfjxmvr Tsx Agzodc

Condition: good (used), Year of construction: 2010, Ref. -No.: 10287 Manufacturer: DMG Type: DMC 210 FD Year of construction: 2010 Type of control: CNC Control: Heidenhain Mill Plus Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2100 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Machine length: 11.000 mm Machine width: 5.000 mm Machine Height: 3.500 mm Max. Workpiece diameter: 2500 mm Nedpfx Asxqdz Degzodc Max. Workpiece Weight: 6.000 kg Max. rotary table diameter: 1.850 O Table speed range: 250 min/-1 Tool Taper: HSK-A100 Tool Piece Magazine With: 600 Pcs./pcs. Spindle Speed: 20.000 RPM Max. Torque: 8.600 Nm Feed Speeds X/Y/Z Axis: 60.000 mm / min Max. Workpiece height: 1.460 mm axes: 5 Further information: Turning and milling center incl. pallet changing system Gear spindle Coolant treatment system, with belt filter, 710 x 50mm 1 Knoll 600S2 chip conveyor 2 Losma oil mist extraction units 1 steel platform (storage space for clamping device): 5,300 x 2,900 mm - Axes renewed 11.2024 - New encoder, electrical components renewed - Geometry protocols available Machine is still in production and under power. The machine can be viewed at any time by appointment.

Condition: ready for operation (used), empty load weight: 1,300 kg, Holke F-10-V X: 815 - Y: 400 - Z: 420 mm Ndjdpfjxpgfisx Agzec Max longitudinal travel X-axe: 815 mm Max cross-travel Y-axe: 400 mm Max travel Z-axe: 420 mm Power on spindle: 2 HP Admission in millinghead: ISO 40 Max quill travel Z': 130 mm Spindlespeeds: 57 > 2275 rpm Table size: 1120 x 255 mm

Condition: ready for operation (used), table: 1270 x 250 mm Ndjdpfexpginsx Agzoc Max longitudinal travel X-axe: 864 mm Max cross-travel Y-axe: 406 mm Max travel Z-axe: 406 mm Power on spindle: 5 HP Admission in boring head (ISO): ISO 40 Table size: 1200 mm