Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 260 mm, travel distance Z-axis: 600 mm, rotational speed (max.): 4,000 rpm, controller model: Fanuc 18i-TB, TECHNICAL DETAILS Swing diameter over bed: 560 mm Swing diameter over cross slide: 520 mm Spindle bore: 130 mm Gkedpsx Ahlwsfx Aftjf Spindle speed: 33 rpm – 4,000 rpm X-axis travel: 260 mm Z-axis travel: 600 mm MACHINE DETAILS Control: Fanuc 18i-TB Power: 22.0 kW Dimensions & Weight Dimensions (L x W x H): 2,500 x 2,300 x 2,900 mm Transport weight: 7,500 kg Transport packages: 4 EQUIPMENT C-axis Three-jaw chuck Facing lathe Chip conveyor Driven tools

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, turning length: 192 mm, turning diameter: 165 mm, travel distance X-axis: 195 mm, Equipment: bar feeder, TECHNICAL DETAILS Max. turning length: 192 mm Max. turning diameter: 165 mm X-axis travel: 195 mm EQUIPMENT Godpfxsx Afzij Aftokf Bar feeder

Condition: ready for operation (used), Year of construction: 2012, operating hours: 3,006 h, functionality: fully functional, turning length: 1,540 mm, travel distance X-axis: 495 mm, travel distance Y-axis: 125 mm, travel distance Z-axis: 1,560 mm, swing diameter over bed slide: 660 mm, controller model: MSX-711 (MAPPS IV), Partially overhauled machine with only approximately 3,000 spindle hours! TECHNICAL DETAILS Turning length: 1,540 mm Max. turning diameter: 610 mm (Turret 2: 274 mm) Swing diameter over bed: 660 mm Swing diameter over cross slide: 660 mm (Turret 2: 300 mm) Turning/Milling Spindle X-axis travel: 495 mm Y-axis travel: 125 mm Z-axis travel: 1,560 mm B-axis: 120 degrees Spindle speed: 12,000 rpm Drive power: 18.5/11 kW (10 min./continuous operation) Tool Magazine Magazine positions: 76 Tool holder: Capto C6 Lower Turret Number of tool stations: 10 Tool change time: 0.19 s Main Spindle Spindle speed: 5,000 rpm Main spindle drive power: 22/18.5 kW (30 min./continuous operation) Sub Spindle Spindle speed: 5,000 rpm Sub spindle drive power: 22/18.5 kW (30 min./continuous operation) MACHINE DETAILS Control system: MSX-711 (MAPPS IV) Operating hours Spindle hours: 3,006 h Operating hours: 4,526 h EQUIPMENT Spindle 2 with tailstock option Gkodpfx Afox An Uxotef Electronic handwheel Interface for high-pressure coolant system Chip conveyor Air nozzle for chuck and tool tip Automatic tool measurement system for upper and lower positions Bar feeder interface Hobbing function

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, empty load weight: 8,400 kg, Submitting a bid obligates you to collect the item on time in calendar week 1 or 2 of 2026! Lathe with portal loading! MACHINE DETAILS Weight: 8,400 kg Godpfxoxzudko Aftekf

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: FXH14B001, turning length: 1,600 mm, spindle speed (max.): 2,500 rpm, travel distance Z-axis: 900 mm, workpiece weight (max.): 8,000 kg, table diameter: 1,250 mm, The machine has only been used approximately 5 times! TECHNICAL DETAILS Travel X-axis: −685 mm to +680 mm Travel Z-axis: 900 mm Travel W-axis: 800 mm Max. swing diameter: 1.600 mm Max. turning length: 1.600 mm Max. workpiece weight: 8,000 kg Table Table diameter: 1,250 mm Low speed: 5–120 rpm High speed: 150–300 rpm Machining spindle Spindle speed: 25–2,500 rpm Max. spindle torque: 478 Nm C-Axis Nominal speed: 3.33 rpm Feed range (milling): 0.1–3,000 mm/min Feed range (turning): 0.01–500 mm/rev Tool changer Tool shank: BT50 Tool magazine capacity: 16 Max. tool diameter: 220 mm Max. tool length: 500 mm Max. tool weight (milling): 25 kg Max. tool weight (turning): 50 kg Tool change time: 30 s MACHINE DETAILS Control brand: Fanuc 0i-T Dimensions Machine height: 5,625 mm Machine weight: 22,000 kg Supply Electrical connection: 90 kVA Air requirement: 5.5 kg/cm² Gedpfxex Atpbs Aftjkf Coolant capacity: 150 l

Condition: excellent (used), Year of construction: 2017, operating hours: 2,138 h, functionality: fully functional, machine/vehicle number: 8107000122B, rotational speed (max.): 8,500 rpm, feed length X-axis: 70 mm, feed length Y-axis: 405 mm, feed length Z-axis: 100 mm, bar diameter (max.): 32 mm, New price: €215,000 TECHNICAL DETAILS Type of CNC control: Fanuc 32i-B Number of spindles (C-axes): 2 Number of axes: 5 Number of channels: 2 Main spindle data Maximum bar capacity: 32 mm Draw tube bore: 38 mm Maximum speed: 8,500 rpm Torque (S2 15 min / S1): 51.9 / 40.4 Nm Power (S2 15 min / S1): 7.5 / 5.5 kW Sub-spindle data Maximum bar capacity: 32 mm Draw tube bore: 38 mm Maximum speed: 8,500 rpm Torque (S2 30 min / S1): 23.6 / 14 Nm Power (S2 30 min / S1): 3.7 / 2.2 kW Axis data X1/Y1/Z1 Travel X1/Y1/Z1 (with turning quill): 70 / 405 / 100 (240) mm Maximum speed X1/Y1/Z1: 40 / 30 / 40 m/min Maximum acceleration X1/Y1/Z1: 5 m/s² Nominal thrust (S1) X1/Y1/Z1: 2,200 / 4,400 / 2,200 N Axis data X2 / Y2 / Z2 Travel X2 / Y2 / Z2: 300 / 135 / 200 mm Maximum speed X2 / Y2 / Z2: 40 / 30 / 40 m/min Maximum acceleration X2 / Y2 / Z2: 5 m/s² Nominal thrust (S1) X2 / Y2 / Z2: 2,200 N Gkedpfx Afex Eikgjtsf Toolholder data Slide 1 Number of fixed tools for internal machining: 4 + 4 Toolholder diameter: 25 mm Number of fixed tools for external machining: 6 Toolholder system: 16 x 16 mm Number of driven tools: 4 Collet type: ESX20 Max. speed of driven tools (GEO 7-9): max. 4,000 rpm Nominal torque (S3 40% / S1): 5.25 / 4.5 Nm Nominal power (S3 40% / S1): 1.9 / 1 kW Max. speed of driven tools (GEO 8-10): max. 6,000 rpm Nominal torque (S3 40% / S1): 3.5 / 3 Nm Nominal power (S3 40% / S1): 1.9 / 1 kW Toolholder data Slide 2 Number of fixed tools for internal machining: 4 Toolholder diameter: 25 mm Number of driven tools: 4 Collet type: ESX20 Max. speed of driven tools (GEO 8-9-10-11): max. 6,000 rpm Nominal torque (S3 40% / S1): 3.5 / 3 Nm Nominal power (S3 40% / S1): 1.9 / 1 kW Toolholder data sub-spindle slide Number of fixed tools for internal machining: 2 Toolholder diameter: 25 mm Lubrication unit data Capacity: 1.8 L Operating pressure: 20 bar Idle period: 7 min Operating period: 30 s Lubricant: ENI EXIDIA HG 68 Pneumatic unit data Min. operating pressure: 5 bar Max. operating pressure: 6 bar Base machine consumption: 180 NL/min MACHINE DETAILS Dimensions: 2,309 x 1,448 x 2,087 mm Connected load: 16 kVA Weight: 3,450 kg Noise level: 75 dB(A) Power-on hours: 3,743 h Spindle hours: 2,138 h EQUIPMENT - with bar feeder 32 x 3000 mm - different channels for bar feeder - high-pressure unit - conversion kit for short turning - various collets, guide bushes, and tooling

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, turning diameter: 380 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 575 mm, counter spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Machining Area Maximum machining diameter: 380 mm Bar capacity: 77 mm Travel X-axis: 230 mm Travel Z-axis: 575 mm Spindle Data Main spindle speed: 4,000 rpm Main spindle motor power: 22 kW Sub spindle speed: 6,000 rpm Sub spindle motor power: 7.5 kW MACHINE DETAILS Control: Mazatrol 640T Nexus EQUIPMENT 12-position turret with driven tools Interface for bar feeder Short bar loader Multifeed MLI 3-jaw chuck Kitagawa B-210 3-jaw chuck Kitagawa B-206 Automatic parts catcher with conveyor belt Oil mist extraction system Bidding obligates timely collection by week 4 of 2026! TECHNICAL DETAILS Machining Area Maximum machining diameter: 380 mm Bar capacity: 77 mm Travel X-axis: 230 mm Travel Z-axis: 575 mm Spindle Data Main spindle speed: 4,000 rpm Main spindle motor power: 22 kW Sub spindle speed: 6,000 rpm Sub spindle motor power: 7.5 kW MACHINE DETAILS Control: Mazatrol 640T Nexus EQUIPMENT 12-position turret with driven tools Interface for bar feeder Short bar loader Multifeed MLI 3-jaw chuck Kitagawa B-210 3-jaw chuck Kitagawa B-206 Gjdpfox Di Uiex Aftjkf Automatic parts catcher with conveyor belt Oil mist extraction system High-pressure coolant: 5 bar Chip conveyor High-pressure coolant: 5 bar Chip conveyor

Condition: ready for operation (used), Year of construction: 2005, operating hours: 17,832 h, functionality: fully functional, turning length: 135 mm, turning diameter: 190 mm, spindle speed (max.): 5,000 rpm, bar diameter (max.): 42 mm, controller model: FANUC 18i-TB, Equipment: bar feeder, TECHNICAL DETAILS Maximum turning diameter: 190 mm Maximum turning length: 135 mm Maximum bar diameter: 42 mm Spindle speed: max. 5,000 rpm Spindle bearing diameter: 85 mm Power: 7.5 kW Tailstock / Turret Boring bar holder: 25 mm Travel X-axis: 162.5 mm Travel Z-axis: 450 mm Travel Y-axis: ±30 mm Travel A-axis: 475 mm Rapid traverse X-axis: 18 m/min Rapid traverse Z-axis: 24 m/min Rapid traverse Y-axis: 12 m/min Rapid traverse A-axis: 30 m/min Driven tools Tool magazine positions: 12 Max. speed driven tools: 4,000 rpm Drilling capacity (diameter): 13 mm Milling capacity (diameter): 13 mm Tapping: M4 – M8 Number of tool magazine positions: 12 MACHINE DETAILS Control: FANUC 18i-TB Dimensions & Weight Dimensions (L × W × H): 2,950 × 2,015 × 2,000 mm Machine weight: 6,700 kg Axes: 8 Simultaneously controlled axes: 4 Operating hours Power on time: 51,408 h Operating time: 17,832 h Piece counter: 670,941 pcs EQUIPMENT 2 turrets Sub-spindle Bar feeder IEMCA BOSS 545E Chip conveyor Gedexz Audepfx Aftekf 5 driven tools 9 standard tools

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: F-00334, controller manufacturer: Siemens, controller model: SINUMERIK 802C, MACHINE DETAILS Control brand: SIEMENS Control model: SINUMERIK 802C Gkedpfx Afox D T A Dstof

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, empty load weight: 8,400 kg, Submission of a bid obligates timely collection in calendar week 1 or 2 of 2026! Lathe with gantry loading! Gsdpfx Ajxzubpsftokf MACHINE DETAILS Weight: 8,400 kg

Condition: excellent (used), Year of construction: 2024, INDEX MS22-8 Mfd. 2024 2 NCU (4) Y-Axis SL Control Cutting hours: 1,000 Turnkey Available Located in Europe 4-Meter IEMCA SIR MS22-8/43/P Rack loader 50 Hz D9-13-19-25 Bar length 4300 mm with drilling unit and minimum quantity lubrication unit additional end-of-bar sensor Bar stock 500mm (D12-D24) Bar stock 340 mm (D5-D11). Additional storage chain for 22 bars with Profinet interface. 1 11007253 (21711) 1 set (8 pieces) bar stock pushers, external clamping for bar stock diameters D7-D10 mm, internal clamping for bar stock diameters D13-D18 mm, consisting of: 8 bar stock pushers D12 8 rotating sleeves D12 1 10287026 (21712) 1 set (8 pieces) bar stock pushers, external clamping for bar stock diameters D11-D16 mm, internal clamping for bar stock diameters D19-D24 mm, consisting of: Gkodpfxox Ddcuj Aftof 8 bar stock pushers D18 8 rotating sleeves D18 1 10536056 (21713) 1 set (8 pieces) bar stock pushers for bar diameters D17 mm-D22 mm, consisting of: 8 bar stock pushers D23 8 rotating sleeves D23 1 10414481 (21702) 1 set (8 pcs.) of internal clamping sleeves D12mm for bar diameters D13 mm - D18 mm Drill diameter D8 mm. 1 10472413 (21704) 1 set (8 pcs.) of external stops D12 mm for bar diameters D13 mm - D18 mm pre-machined. 1 10264327 (21703) 1 set (8 pcs.) of internal clamping sleeves D18mm for bar diameters D19 mm - D24 mm Drill diameter D15mm. 1 10058206 (21705) 1 set (8 pcs.) of external stops D18 mm for bar diameter D19 mm - D24 mm pre-machined. 1 12123486 Drill for drilling unit consisting of: 1 indexable insert drill D 15 mm 10 indexable inserts for steel 2 solid carbide drills D 8 mm

Year of construction: 2018, condition: ready for operation (used), Control Unit Brand HAAS Main Drive Spindle speed range 2400 rpm Spindle motor power 40 hp Number of axis 2 Tail Stock Pinol tool taper MT5 Media Chip conveyor Yes Additional Equipment Line Filter & Surge Suppressor – 220 VAC, 3-phase, 80 A, 60 Hz Early Power-Failure Detection Module Belt-Type Chip Conveyor This HAAS ST-40 was manufactured in 2018. It features a 15-inch chuck, a maximum part swing of 35.5 inches, and a cutting diameter of 30 inches. The machine includes a 2-speed gearbox spindle, capable of 2,400 rpm, and a 12-station BOT turret. Additional equipment includes a belt-type chip conveyor and a programmable servo tailstock. Consider the opportunity to buy this HAAS ST-40 horizontal turning machine. Contact us for more information about this machine. Gjdjx D I Ubopfx Aftjkf Application Types Turning

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, turning length: 300 mm, TECHNICAL DETAILS Turning length: 300 mm Godpfxexz Apbe Aftekf Distance between centers: 800 mm MACHINE DETAILS Control: FANUC 16T EQUIPMENT 3 turrets Sub-spindle

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 100226, The submission of a bid obligates you to collect on time in week 1 or week 2 of 2026! MACHINE DETAILS Total weight: 10,000 kg Gjdpfx Afsxzt R Netekf Electrical connection Mains type: 3~ Frequency: 50 Hz Operating voltage: 400 V General control voltage: 24 V Valve control voltage: 24 V Connected load: 36 kW Rated current: 56 A Main fuse: 80 A Lighting connection: 24 V Lighting connection power: 18 W

Condition: excellent (used), Year of construction: 2018, EMAG VL 3 DUO CNC Twin Spindle, Vertical Turret Lathe Mfd. 2018 S/N 1100619, EMAG CNC control, Gkedpfx Afeu T Shvstof (2) 12-station turrets, Chip conveyor, Full automation system Hennig system Hours: 4,684 2 Machines Available 110612, (2) w/Hennig Mdl. 102783 chip conveyor, full automation system, 4,684 and 7,401 hours.

Year of construction: 2009, condition: ready for operation (used), General Data Measurements width 1879,6 mm Measurements depth 2743.2 mm Measurements height 1905 mm Machine weight 11000 kg Control Unit Brand MAZATROL Main Drive Spindle speed range 4000 RPM Spindle motor power 35 HP Spindle bore 76.2 mm Number of axis 2 Movement X-Axis Movement 177,8 mm Z-Axis Movement 558,8 mm Workpiece Workpiece drm over bed 6731 mm Turret Number of turrets 1 Gkedpfxsx D R Nzs Aftof Tools Number of station 12 This Mazak QTN 250-II was manufactured in 2009. A robust horizontal turning machine, it offers reliable performance for precision machining. Ideal for those looking to enhance their machining capabilities with a proven model. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Z-axis: 300 mm, TECHNICAL DETAILS X-axis travel: 660 mm Z-axis travel: 300 mm Chuck diameter: 250 mm Godpfx Asxy Hp Njftokf Swing diameter: 270 mm

Condition: used, Year of construction: 2014, INDEX C200 CNC Lathe 3 Turrets 2 spindles Gkodpfx Asxxm Hfsftef Fanuc Control: 31i-Model B Axial Motorized Switches: 6 pcs Radial Motorized Switches: 13 pcs Tool Holders: 11 pcs Boring Bar Holders: 21 pcs Pin: 1 pcs Loader Bushings + Sleeves: Ø51/Ø46/Ø41 New MBL loader bushings: 2 sets 2 optical scales overhauled by HEIDENHAIN 1 Balluff Socket Gantry Arms Box with various sensors and proximity switches and cables Motorized Belts: 6 pcs Set of anti-vibration bushings for MBL loaders Start-up time: On time: 37946 Hydraulic hours: 37,500 Production time: 26,500 With MBL Bar Feed

Condition: ready for operation (used), Year of construction: 2010, General Data Measurements width 2700 mm Measurements depth 5700 mm Measurements height 2100 mm Machine weight 7950 kg Control Unit Brand SIEMENS Model SINUMERIK 840D solution line with ERGOline control and ShopTurn, operating system Windows Main Drive Spindle speed range 5000 Spindle bore 87 mm Number of axis 5 Movement X-Axis Rapid Traverse 30 m/min Y-Axis Rapid Traverse 30 m/min Z-Axis Rapid Traverse 30 m/min Tail Stock Pinol tool taper MT 5 Tools Max weight 7 kg Max tool diameter 80 This 5-axis DMG CTX Beta 1250 TC turn-mill centre was manufactured in 2010. It features a swing diameter of 500 mm, max turning diameter of 390 mm, and a turning length of 1250 mm. The spindle supports up to 5000 RPM and 34 kW power, complemented by a 24-position tool magazine. Ideal for complex machining tasks, consider the opportunity to buy this DMG CTX Beta 1250 TC turn-mill centre. Contact us for more information about this machine. Application Types Gsdpox D S S Defx Aftskf Turning

Condition: used, Year of construction: 2018, DMG Mori Sprint 32/8 CNC Swiss Lathe Mfd. 2018 Control: Fanuc 32-B Plus 8-Axis Power: 75 HP Gsdpfx Afjxxm A Tjtokf RPM 8,500 Diameter: 32mm With 12-ft Patriot 338 Bar Feed Equipped as pictured Machine concept Number of linear axes + C-axes 6 + 2 Number of spindles 2 Number of channels 2 Main spindle Maximum bar capacity mm | in 32 | 1.26 Speed rpm 8,500 Power (S2 30 min/S1) kW | hp 7.5/5.5 | 10.1/7.4 S2 15 min/S1 Torque (S2 30 min/S1) Nm | ft lbs 51.9/40.4 | 38.3/29.8 S2 15 min/S1 Counter spindle Maximum bar capacity mm | in 32 | 1.26 C-axis (0.001°) Speed rpm 8,500 Power (S2 30 min/S1) kW | hp 3.7/2.2 | 5.0/3.0 Torque (S2 30 min/S1) Nm | ft lbs 23.6/14 | 17.4/10.3 Working area/ travels Z1 travel (spindle travel) mm | in 100 | 3.94 Rapid traverse speed on linear axes X1, Z1, X2, Z2/Y1, Y2 m / min | in/ min 40/30 | 131/98 Acceleration in linear axes m /s² | ft 5 | 0.02 Tool holder on slide 1 Fixed turning tools 6 Tools for front machining/back-working 4/4 Driven tools 2 + 2 Maximum speed rpm 6,000 Power (S3 40 % /S1) kW | hp 1.9/1 | 2.5/1.3 Maximum torque (S3 40 % /S1) Nm | ft lbs 3. The 2018 DMG Mori Sprint 32/8 is a high-performance CNC screw machine built for precision, speed, and versatility in complex small-part production. Featuring an 8-axis configuration with 6 linear axes and 2 C-axes, the machine is powered by the FANUC 32i-B Plus control system with a 10.4” color display. The Sprint 32/8 is designed with dual spindles capable of 8,500 RPM, with the main spindle delivering 7.4 hp and 29.8 ft-lbs of torque, and the counter spindle generating 3 hp and 10.3 ft-lbs. Both spindles handle bar stock up to 32mm (1.26"), making it ideal for precise machining in medical, aerospace, and automotive industries. The machine supports simultaneous machining with up to 2 tools and offers advanced back-working capabilities. The working area includes Z1, X1/Y1, and X2/Z2/Y2 travels, allowing for intricate multi-sided operations. Tooling includes 8 driven tool stations and multiple configurations for both front and back machining, with speeds up to 6,000 RPM and torque of 2.2 ft-lbs. The Tool Monitoring System offers graphical tool load display, aiding in predictive maintenance and minimizing downtime. Additional features include high-pressure coolant and an integrated air handler, contributing to stable thermal conditions and chip evacuation. Its compact footprint of 30.1 ft² and total weight of 7,826 lbs make the Sprint 32/8 a space-efficient and powerful addition to any high-volume CNC shop. This machine is engineered to streamline part production while ensuring repeatable accuracy, robust power, and operational efficiency.

Condition: good (used), Year of construction: 2006, INDEX MS52C CNC Multi-Spindle Mfd. 2006 Control: Siemens 840D 6 Spindles 52mm Capacity Equipped as pictured Under power Gksdpfst Rkzwex Aftef Knoll System Chip Conveyor Riedel Chiller 3.6 meter (12ft) IEMCA SIR Bar Feed SIR MS52/F Type 38 XL Mfd. 2005

Condition: used, Year of construction: 2024, INDEX MS22-8 Mfd. 2024 2 NCU (4) Y-Axis SL Control Cutting hours: 1,000 Turnkey Available Located in Europe 4-Meter IEMCA SIR MS22-8/43/P Rack loader 50 Hz D9-13-19-25 Bar length 4300 mm with drilling unit and minimum quantity lubrication unit additional end-of-bar sensor Bar stock 500mm (D12-D24) Bar stock 340 mm (D5-D11). Additional storage chain for 22 bars with Profinet interface. 1 11007253 (21711) 1 set (8 pieces) bar stock pushers, external clamping for bar stock diameters D7-D10 mm, internal clamping for bar stock diameters D13-D18 mm, consisting of: 8 bar stock pushers D12 8 rotating sleeves D12 1 10287026 (21712) 1 set (8 pieces) bar stock pushers, external clamping for bar stock diameters D11-D16 mm, internal clamping for bar stock diameters D19-D24 mm, consisting of: 8 bar stock pushers D18 8 rotating sleeves D18 1 10536056 (21713) 1 set (8 pieces) bar stock pushers for bar diameters D17 mm-D22 mm, Gkodpfexnrtcjx Aftof consisting of: 8 bar stock pushers D23 8 rotating sleeves D23 1 10414481 (21702) 1 set (8 pcs.) of internal clamping sleeves D12mm for bar diameters D13 mm - D18 mm Drill diameter D8 mm. 1 10472413 (21704) 1 set (8 pcs.) of external stops D12 mm for bar diameters D13 mm - D18 mm pre-machined. 1 10264327 (21703) 1 set (8 pcs.) of internal clamping sleeves D18mm for bar diameters D19 mm - D24 mm Drill diameter D15mm. 1 10058206 (21705) 1 set (8 pcs.) of external stops D18 mm for bar diameter D19 mm - D24 mm pre-machined. 1 12123486 Drill for drilling unit consisting of: 1 indexable insert drill D 15 mm 10 indexable inserts for steel 2 solid carbide drills D 8 mm

Condition: good (used), Year of construction: 1980, Davenport Model B 3/4" Mfd. in 1980s Pickoff / Back Finish Threading Stock Reel and Stand Gjdpfxeh I Euao Aftjkf Chip Conveyor Noise Tamer Sound Enclosure Refurbished and Ready to Run Several similar machines available

Condition: excellent (used), Year of construction: 2000, INDEX ABC CNC Lathe. Mfd. 2000 Control: Siemens 840C Capacity 65mm Ran oil Still in production, running nylon With 12-ft Bar Feed (pictured) Chip Conveyor Comes the a good amount of tooling Control Type: Siemens SINUMERIK 840C Spindle Speed (max.): 6,000 RPM Power Requirements (V/Hz/PH): 400/60/3 Main Spindle Speed (max.): 6,000 RPM Bar Capacity: 65 mm Power: 20 kW (at 100%) Power: 27 kW (at 40%) Synchronous Spindle Speed (max.): 4,500 RPM Power (max.): 4.2 kW Godpfx Afjw Td U Rjtekf Capacity Tool Carrier 1: 8 (7 + synchronous spindle) Tool Carrier 2: 6 Dimensions Bar Feeder: L 150" x W 27" x H 52" Turning Center: L 80" x W 48" x H 65" Power Enclosure: L 52" x W 18" x H 70" Chip Conveyor: L 88" x W 48" x H 35"

Condition: excellent (used), Traub TNL12 CNC Swiss 12mm Capacity Production hours: 25596 hr. Kraft & Bauer Fire Suppression System Paper filter: Kompatkt Band Filter Configured as pictured (more photos to follow) Put into production in 2009 (originally show model) 12-ft FMB Bar Feed Mist Collector Chip Conveyor Gjdpfxew R E Ade Aftekf “2 machines available”