Used cNC turning and milling centers for sale (596)

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, turning length: 300 mm, TECHNICAL DETAILS Turning length: 300 mm Distance between centers: 800 mm MACHINE DETAILS Guedpfx Aexz Apbjftok Control: FANUC 16T EQUIPMENT 3 turrets Sub-spindle

Condition: ready for operation (used), Year of construction: 2012, operating hours: 3,006 h, functionality: fully functional, turning length: 1,540 mm, travel distance X-axis: 495 mm, travel distance Y-axis: 125 mm, travel distance Z-axis: 1,560 mm, swing diameter over bed slide: 660 mm, controller model: MSX-711 (MAPPS IV), Partially overhauled machine with only approximately 3,000 spindle hours! TECHNICAL DETAILS Turning length: 1,540 mm Max. turning diameter: 610 mm (Turret 2: 274 mm) Swing diameter over bed: 660 mm Swing diameter over cross slide: 660 mm (Turret 2: 300 mm) Turning/Milling Spindle X-axis travel: 495 mm Y-axis travel: 125 mm Z-axis travel: 1,560 mm B-axis: 120 degrees Spindle speed: 12,000 rpm Drive power: 18.5/11 kW (10 min./continuous operation) Tool Magazine Magazine positions: 76 Tool holder: Capto C6 Lower Turret Number of tool stations: 10 Tool change time: 0.19 s Main Spindle Spindle speed: 5,000 rpm Main spindle drive power: 22/18.5 kW (30 min./continuous operation) Sub Spindle Spindle speed: 5,000 rpm Sub spindle drive power: 22/18.5 kW (30 min./continuous operation) MACHINE DETAILS Control system: MSX-711 (MAPPS IV) Operating hours Spindle hours: 3,006 h Operating hours: 4,526 h EQUIPMENT Spindle 2 with tailstock option Electronic handwheel Interface for high-pressure coolant system Chip conveyor Air nozzle for chuck and tool tip Automatic tool measurement system for upper and lower positions Bar feeder interface Gedpfx Afox An Uxstouk Hobbing function

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, turning diameter: 380 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 575 mm, counter spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Guedpsx Di Uiefx Aftsk Machining Area Maximum machining diameter: 380 mm Bar capacity: 77 mm Travel X-axis: 230 mm Travel Z-axis: 575 mm Spindle Data Main spindle speed: 4,000 rpm Main spindle motor power: 22 kW Sub spindle speed: 6,000 rpm Sub spindle motor power: 7.5 kW MACHINE DETAILS Control: Mazatrol 640T Nexus EQUIPMENT 12-position turret with driven tools Interface for bar feeder Short bar loader Multifeed MLI 3-jaw chuck Kitagawa B-210 3-jaw chuck Kitagawa B-206 Automatic parts catcher with conveyor belt Oil mist extraction system Bidding obligates timely collection by week 4 of 2026! TECHNICAL DETAILS Machining Area Maximum machining diameter: 380 mm Bar capacity: 77 mm Travel X-axis: 230 mm Travel Z-axis: 575 mm Spindle Data Main spindle speed: 4,000 rpm Main spindle motor power: 22 kW Sub spindle speed: 6,000 rpm Sub spindle motor power: 7.5 kW MACHINE DETAILS Control: Mazatrol 640T Nexus EQUIPMENT 12-position turret with driven tools Interface for bar feeder Short bar loader Multifeed MLI 3-jaw chuck Kitagawa B-210 3-jaw chuck Kitagawa B-206 Automatic parts catcher with conveyor belt Oil mist extraction system High-pressure coolant: 5 bar Chip conveyor High-pressure coolant: 5 bar Chip conveyor

Condition: used, Year of construction: 2018, DMG Mori Sprint 32/8 CNC Swiss Lathe Mfd. 2018 Control: Fanuc 32-B Plus 8-Axis Power: 75 HP RPM 8,500 Diameter: 32mm With 12-ft Patriot 338 Bar Feed Equipped as pictured Godpfxjxxm A Ts Aftouk Machine concept Number of linear axes + C-axes 6 + 2 Number of spindles 2 Number of channels 2 Main spindle Maximum bar capacity mm | in 32 | 1.26 Speed rpm 8,500 Power (S2 30 min/S1) kW | hp 7.5/5.5 | 10.1/7.4 S2 15 min/S1 Torque (S2 30 min/S1) Nm | ft lbs 51.9/40.4 | 38.3/29.8 S2 15 min/S1 Counter spindle Maximum bar capacity mm | in 32 | 1.26 C-axis (0.001°) Speed rpm 8,500 Power (S2 30 min/S1) kW | hp 3.7/2.2 | 5.0/3.0 Torque (S2 30 min/S1) Nm | ft lbs 23.6/14 | 17.4/10.3 Working area/ travels Z1 travel (spindle travel) mm | in 100 | 3.94 Rapid traverse speed on linear axes X1, Z1, X2, Z2/Y1, Y2 m / min | in/ min 40/30 | 131/98 Acceleration in linear axes m /s² | ft 5 | 0.02 Tool holder on slide 1 Fixed turning tools 6 Tools for front machining/back-working 4/4 Driven tools 2 + 2 Maximum speed rpm 6,000 Power (S3 40 % /S1) kW | hp 1.9/1 | 2.5/1.3 Maximum torque (S3 40 % /S1) Nm | ft lbs 3. The 2018 DMG Mori Sprint 32/8 is a high-performance CNC screw machine built for precision, speed, and versatility in complex small-part production. Featuring an 8-axis configuration with 6 linear axes and 2 C-axes, the machine is powered by the FANUC 32i-B Plus control system with a 10.4” color display. The Sprint 32/8 is designed with dual spindles capable of 8,500 RPM, with the main spindle delivering 7.4 hp and 29.8 ft-lbs of torque, and the counter spindle generating 3 hp and 10.3 ft-lbs. Both spindles handle bar stock up to 32mm (1.26"), making it ideal for precise machining in medical, aerospace, and automotive industries. The machine supports simultaneous machining with up to 2 tools and offers advanced back-working capabilities. The working area includes Z1, X1/Y1, and X2/Z2/Y2 travels, allowing for intricate multi-sided operations. Tooling includes 8 driven tool stations and multiple configurations for both front and back machining, with speeds up to 6,000 RPM and torque of 2.2 ft-lbs. The Tool Monitoring System offers graphical tool load display, aiding in predictive maintenance and minimizing downtime. Additional features include high-pressure coolant and an integrated air handler, contributing to stable thermal conditions and chip evacuation. Its compact footprint of 30.1 ft² and total weight of 7,826 lbs make the Sprint 32/8 a space-efficient and powerful addition to any high-volume CNC shop. This machine is engineered to streamline part production while ensuring repeatable accuracy, robust power, and operational efficiency.

Condition: ready for operation (used), Year of construction: 2010, General Data Measurements width 2700 mm Measurements depth 5700 mm Measurements height 2100 mm Machine weight 7950 kg Control Unit Brand SIEMENS Model SINUMERIK 840D solution line with ERGOline control and ShopTurn, operating system Windows Main Drive Gedpfex D S S Dox Aftsuk Spindle speed range 5000 Spindle bore 87 mm Number of axis 5 Movement X-Axis Rapid Traverse 30 m/min Y-Axis Rapid Traverse 30 m/min Z-Axis Rapid Traverse 30 m/min Tail Stock Pinol tool taper MT 5 Tools Max weight 7 kg Max tool diameter 80 This 5-axis DMG CTX Beta 1250 TC turn-mill centre was manufactured in 2010. It features a swing diameter of 500 mm, max turning diameter of 390 mm, and a turning length of 1250 mm. The spindle supports up to 5000 RPM and 34 kW power, complemented by a 24-position tool magazine. Ideal for complex machining tasks, consider the opportunity to buy this DMG CTX Beta 1250 TC turn-mill centre. Contact us for more information about this machine. Application Types Turning

Condition: used, Year of construction: 2004, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Hardinge Lathe Model TT-66 Year 2004 CNC GE Fanuc Series 18i-T Twin Spindle Twin Turret Chip Conveyor Iemca Bar Feeder Gedpfx Afjx Hw Uretsuk Driven Tools

Condition: excellent (used), Year of construction: 2013, swing over cross-slide 360mm, Maximum cutting diameter 366mm, Maximum cutting length 705mm, Bar capacity 80mm, Spindle speed 4,000rpm, milling speed 10,000rpm, Main spindle power 18.5Kw, C axis 0.001 degrees, Y axis -/+ 50mm, 12 station turret. Mori Control M730BM, equipped with Toolsetter, swarf conveyor, 3 jaw chuck, Parts catcher, barfeed unit Gujdpfx Afsx Eitujtsk

Condition: good (used), Year of construction: 2000, turning length: 300 mm, turning diameter over cross slide: 520 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 219 mm, travel distance Z-axis: 310 mm, Mori Seiki SL-150 SMC Twin Spindle CNC Turning Center (2000) Machine Type: CNC Turning Center Year of Manufacture: 2000 Serial Number: 1352 Control System: Mori Seiki SMC-501 Twin Spindle (Main & Sub Spindle) Live Tooling Turret C-Axis: 0.001° indexing Maximum Turning Diameter: approx. 320 mm Maximum Turning Length: approx. 300 mm Swing Over Bed: approx. 520 mm X-Axis Travel: approx. 210 mm Z-Axis Travel: approx. 310 mm Main Spindle Maximum Speed: 5,000 rpm Chuck: 6.5" 3-Jaw Power Chuck Sub Spindle Maximum Speed: 5,000 rpm Gedpfxex Hp Hgs Afteuk Chuck: 5.5" 3-Jaw Power Chuck Live Tooling Live Tool Speed: 3,000 rpm Tool Turret: 12-Station Live Turret Standard Equipment Tool Presetter Chip Conveyor Coolant System Machine Data Machine Weight: approx. 5,000 kg Machine Dimensions (L × W × H): approx. 2,800 × 1,700 × 1,800 mm

Condition: excellent (used), Year of construction: 2004, CNC Control: MSG-501 X axis mm: 900 Y axis mm: 800 Z axis mm: 980 B axis mm: 0.001 Pallet size mm: 630 x 630 Number of pallets: 2 Table load capacity kg: 1,200 Cutting feed mm/min X,Y,Z: 50,000 Max. rapid traverse m/min X, Y, Z: 50, 50, 50 Spindle speed rpm: 10,000 Spindle power kW: 30/25 Taper type: BT-50 Torque Nm: - Tool changer type: Chain Tool changer positions: 60 Max. tool diameter mm: 110 Max. tool diameter with adjacent positions empty: 320 Max. tool length mm: 600 Max. tool weight kg: 30 Coolant tank capacity l: 930 Through spindle cooling bar: Yes EQUIPMENT Chip conveyor Internal cooling Gusdpfxjxw Rg Ho Aftjk Rigid tapping Manuals, electrical diagram, etc. MACHINE DIMENSIONS Length mm: 3,670 Width mm: 5,300 Height mm: 3,270 Weight kg: 19,000

Condition: excellent (used), Year of construction: 2019, Doosan Puma TT2100SYY Mfd. 2019 Tooled as pictured Specifications Godpfxow Dvnxe Afteuk SWING OVER BED 9.05" MAX CUTTING DIAMETER 9.05" DISTANCE BETWEEN CENTERS 38.5" X-AXIS TRAVEL 6.5" Y-AXIS Yes Y-AXIS TRAVEL 3.93" Z-AXIS TRAVEL 27.5" C-AXIS INDEXING FULL CONTOURING C-AXIS CHUCK SIZE 8" BAR CAPACITY 2.625" SPINDLE NOSE A2-6 SPINDLE MOTOR 35 hp SPINDLE SPEED 5,000 RPM RAPID TRAVERSE RATE - X-AXIS 1,181 in/min. RAPID TRAVERSE RATE - Z-AXIS 1,575 in/min. SUB SPINDLE Yes SUB SPINDLE - CHUCK SIZE 8" SUB SPINDLE - BAR CAPACITY 2.56" SUB SPINDLE - SPINDLE NOSE A2-6 SUB SPINDLE - SPINDLE MOTOR 25 hp SUB SPINDLE - SPINDLE SPEED 5,000 RPM SUB SPINDLE / W-AXIS TRAVEL 28.7" TURRET CAPACITY 12 TURRET TYPE BMT55 LIVE MILLING Yes LIVE MILLING SPEED 5,000 RPM LIVE MILLING MOTOR 10 hp TURRET 2 CAPACITY 12 TURRET 2 - X-AXIS TRAVEL 6.5" TURRET 2 - Z-AXIS TRAVEL 27.56" Dimensions 93" X 153" (W/CONVEYOR - 186") X 88.6"H Weight 20,940 LBS Equipped With FANUC OiTF CNC CONTROL DOOSAN EZ GUIDE i PROGRAMMING TWIN 12 POSITION TURRETS UPPER AND LOWER, W/24 POSITION INDEXING ON EACH TURRET WITH BASE MOUNT TOOLING SYSTEM Y-AXIS ON BOTH TURRETS (2) INTEGRAL SPINDLES FULL CONTOURING C-AXES ON BOTH SPINDLE MILL/DRILL ON UPPER AND LOWER TURRETS PARTS CATCHER LEFT AND RIGHT PROGRAMMABLE PARTS UNLOADER PARTS CONVEYOR BAR FEED INTERFACE 8" 3-JAW KITAGAWA CHUCK FOR LEFT AND RIGHT SPINDLES (COLLET SYSTEMS IN ON MACHINE NOT INCLUDED IN SALE) (2) X-AXIS LIVE HOLDERS (2) Z-AXIS LIVE HOLDERS STANDARD FACTORY STATIC TOOLING DOOSAN TOOL LOAD MONITORING SYSTEM AIR BLAST SYSTEM FOR CHUCK CLEANING 2 machines available

Condition: ready for operation (used), Year of construction: 2006, operating hours: 20,695 h, Control Unit Brand MAZATROL Model Matrix Movement X-Axis Movement 630 Y-Axis Movement 230 Z-Axis Movement 1585 W-Axis Movement 1546 Guedpfjx D Szrox Aftsk Additional Equipment Options Screen: Picture available This 5-axis Mazak Integrex 400 IV was manufactured in 2006. It features a Mazatrol Matrix control, a 12-inch chuck, and a steady rest supporting 70-230mm. The machine offers a milling spindle speed of 12000rpm and a turning spindle speed of 2800rpm. If you are looking to get high-quality turn-mill capabilities, consider the Mazak Integrex 400 IV machine we have for sale. Contact us for more information about this machine. Application Types Turning

Condition: used, Year of construction: 2021, turning length: 1,519 mm, turning diameter: 670 mm, total height: 2,715 mm, total length: 6,110 mm, total width: 2,700 mm, CNC Turning Milling Centre with 2nd Spindle Control Mazatrol Smooth Ai Turning diameter 670 mm Turning length 1519 mm Spindle bore diameter 102 mm Spindle nose A 2-11 Spindle nose sub spindle A 2-8 Turning speed 35-3.300 R/min Turning speed sub spindle 4.000 R/min Milling head speed 12.000 R/min Movement X-axis 695 (+570/-125) mm Movement Y-axis 300 mm Movement Z-axis 1585 mm B-Axis travel -30/+210° Godpfxox E Uido Aftouk C-Axis indexing 0,0001° Tool Taper Capto C6 Tools in tool magazine 112 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 2015, functionality: fully functional, Technical details turning diameter 170 mm turning length 330 mm control Fanuc System Oi-TD total power requirement 27 kVA weight of the machine ca. 6,0 t Additional information Precision CNC turning center with main and sub-spindle, driven tools and Y-axis Fanuc Oi-TD CNC control 6 controlled axes 4 simultaneously controlled axes Maximum workpiece (diameter x length): 170 x 330 mm Bar capacity: 65 mm Travels: X-axis: 211 mm Z-axis: 400 mm Y-axis: ± 50 mm A (counter spindle): 506 mm C-axis: 0.001 deg Rapid traverses: X-axis: 24 m/min Z-axis: 27 m/min Y-axis: 12 m/min A-axis: 27 m/min Main Spindle: Spindle diameter at front bearing: 100 mm Spindle head: A 2-6 Spindle motor: AC 7.5/11 kW (30 min./100% duty cycle) Speed range: 4500 rpm Sub-spindle: Spindle diameter at front bearing: 100 mm C-axis: 0.001 deg Speed range: 4500 rpm Drive power: 5.5/7.5 kW (30 min./100% duty cycle) Spindle flushing with integrated pneumatic ejector Turret: 12 stations Tool taper 25 x 25 mm Internal machining 40 mm diameter Max. speed: 5000 rpm Drive power 1.5/3.7 kW (30 min./100% duty cycle) Drilling/milling up to 13 mm diameter Tapping up to M8 Total connected load 27 kVA Dimensions: Machine length without chip conveyor 2690 mm Machine width without chip conveyor 1865 mm Machine height 1900 mm Net weight 6000 kg Equipment and accessories: Bar feeder Gjdpfxex Hgnus Aftouk Chip conveyor Various accessories such as collets and tool holders

Condition: good (used), Year of construction: 2004, operating hours: 19,400 h, functionality: fully functional, turning length: 750 mm, turning diameter over cross slide: 250 mm, turning diameter: 190 mm, spindle bore: 49 mm, travel distance X-axis: 270 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 880 mm, rapid traverse X-axis: 18 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 24 m/min, milling spindle length: 60 mm, rotational speed (max.): 6,000 rpm, Equipment: bar feeder, chip conveyor, Multi Axis Mori Seiki ZT-1000Y Year 2004 8-axis turning milling machine With LNS bar feeder Many tool-holders and live-tools included Max. workpiece turning diameter: 250 mm Max. distance between spindles: 750 mm Max. turning diameter: 190 mm Max. turning length: 190 mm Standard bar diameter: 170 mm Max. bar capacity: 120 mm X-axis travel: ±135 mm Z-axis travel: ±440 mm Y-axis travel: ±40 mm B-axis (spindle 2) travel: 510 mm Spindle speed range: 60–6000 rpm Spindle bore: 49 mm Spindle nose diameter: 80 mm Min. spindle indexing angle: 0.001° Guodpfx Aox Hp E Njftek Turret type: 12 stations Tool shank diameter: 20 mm Max. live tool speed: 6000 rpm Live tool machining capacity: Ø13 mm drill / M12 tap Live tool motor power: 3.7 / 2.2 kW Rapid traverse speed: X1/X2: 18000 mm/min, Z1/Z2: 24000 mm/min, Y: 6000 mm/min Main spindle motor power: 7.5 / 5.5 kW Machine dimensions (L×W×H): 2797 × 2010 × 1995 mm Machine weight: 5000 kg Power requirement: 46 kVA

Condition: excellent (used), Year of construction: 2007, TECHNICAL DETAILS: - CNC Control: MSX 803III - X Axis travel: 260 mm - Z Axis travel: 590 mm - Y Axis travel: +/- 50 mm - Maximum Turning Diameter: 356 mm - C Axis Indexing Increment: 0.001° - Maximum Turning Length: - Cutting Feed Rate X, Z, Y: - Swing Over Bed: - Swing Over Carriage: - Bar Capacity: Ø 65 mm (main spindle) - Max. Rapid Traverse X, Z: - Main Spindle 12” - Spindle Speed: 5,000 rpm - Spindle Power: 18.5 kW - Torque: - Main Spindle Bore: mm - Main Spindle Nose: A2-6 - Sub-Spindle - Spindle Speed: 6,000 rpm - Spindle Power: 11 kW - Torque: - Sub-Spindle Bore: mm - Sub-Spindle Nose: A2-5 - Turret Positions: 12 - Number of Driven Tool Stations: 12 - Driven Tool Speed: 6,000 rpm Gsdpfx Aowdrfgsfteuk - Driven Tool Power: 5.5 kW EQUIPMENT: - Chip conveyor - 3-color status light - Fixed tool holders - Parts catcher MACHINE DIMENSIONS: - Length: 2,705 mm - Width: 2,000 mm - Height: 2,120 mm - Weight: 5,800 kg

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 123, spindle speed (min.): 200 rpm, spindle speed (max.): 10,000 rpm, total height: 2,200 mm, total length: 9,000 mm, total width: 1,500 mm, overall weight: 5,000 kg, controller manufacturer: FANUC, controller model: SERIES 32i-MODEL B, counter spindle speed (min.): 200 rpm, counter spindle speed (max.): 10,000 rpm, TSUGAMI B0266E-II CNC Automatic Lathe - Operating voltage: 200 V - Frequency: 50 Hz - Rated current: 21.4 A - Max. bar capacity: 26 mm - Max. machining length: 320 mm (synchronously driven guide bushing) - Without guide bushing: 50 mm - Max. drilling diameter: 12 mm - Max. tapping diameter: M10 - Deep hole drilling diameter: 10 mm - Max. clamping diameter sub-spindle: 26 mm - Max. drilling diameter sub-spindle: 10 mm - Max. tapping diameter sub-spindle: M10 Guedpex Hxz Hefx Aftek - Max. drilling diameter tool spindle: 8 mm (front/rear tool holder) - Max. tapping diameter: M6 (front/rear tool holder) - Max. slot milling cutter diameter at tool spindle: 45 mm - Rotating guide bushing: 200 - 10,000 rpm (synchronously driven) - Tool spindle speed: 200 - 6,000 rpm - Total number of tools (standard specification): 31 - Tool size: 16 mm square x 100 mm - Rapid traverse: 32 m/min; rapid traverse in X1 and Y1: 24 m/min, in Y2: 24 m/min - Controllable axes: 6 The machine is equipped with a bar loader from FMB, type: TURBO 3-36, and a chip conveyor. Note: The item must be collected, by firm appointment, between 04 and 12 March 2026 (exact date to be coordinated). FCA D-75181 Pforzheim – loaded onto truck

Condition: used, Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Main Spindle Power: 15/11 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Guedpfxox Hhm Ej Aftsk Turning and milling spindle Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Linear rack magazine incl. support robot CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler

Condition: excellent (used), Year of construction: 2007, TECHNICAL DETAILS CNC Control: FANUC 18i-TB X1/X2 Axis mm: 555/185 Z1/Z2 Axis mm: 1,095/1,140 Y Axis mm: 160 (+/- 80) B Axis mm: 240 (+/- 120) Maximum Turning Diameter mm: 550 C Axis Increment: 0.001° Maximum Turning Length mm: 1,020 Cutting Feed Rate mm/min X,Z,Y: 500 Rapid Traverse Speed mm/min: X1, Z1: 24,000 Y: 16,000 B: 27,000 C: 200 (Z2: 24,000) (X2: 24,000) Gjdpsxxdmiofx Aftsuk Swing Over Bed mm: Ø 750 Swing Over Cross Slide mm: Ø 600 Bar Capacity mm: Ø 65 (main) / Ø - (sub) Max. Rapid Traverse m/min X,Z,B-Y: - Spindle / Sub-Spindle: - Spindle Speed rpm: 5,000 Spindle Power kW: 22/15 Torque Nm: - Main Spindle Bore: - Main Spindle Nose: A2-6 Milling Head: - Spindle Speed rpm: 10,000 Spindle Power kW: 15/11 Torque Nm: - Taper Type: CAPTO C6 Number of Tools in Magazine: 40 Turret: - Turret Positions: - Number of Driven Tool Stations: - Driven Tool Speed rpm: - Driven Tool Power: - EQUIPMENT Chip Conveyor, Hinged Belt Type: Included Bar Feeder Interface Adjustment Control: Included MACHINE DIMENSIONS Length mm: 6,070 Width mm: 2,682 Height mm: 3,011 Weight kg: 15,500

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 22012A, spindle speed (min.): 200 rpm, spindle speed (max.): 10,000 rpm, total height: 2,200 mm, total length: 9,000 mm, total width: 1,500 mm, overall weight: 5,000 kg, controller manufacturer: FANUC, controller model: SERIES 32-i MODEL B, counter spindle speed (min.): 200 rpm, counter spindle speed (max.): 10,000 rpm, TSUGAMI B0266E-II CNC Automatic Lathe - Operating voltage: 400 V Godpfx Afsx Hxy Ajteuk - Frequency: 50 Hz - Rated current: 64 A - Max. bar stock clamping diameter: 26 mm - Max. machining length: 320 mm (synchronously driven guide bushing) - Without guide bushing: 50 mm - Max. drilling diameter: 12 mm - Max. tapping diameter: M10 - Diameter of deep-hole drilling: 10 mm - Max. sub-spindle clamping diameter: 26 mm - Max. sub-spindle drilling diameter: 10 mm - Max. sub-spindle tapping diameter: M10 - Max. tool spindle drilling diameter: 8 mm (front/rear tool holder) - Max. tool spindle tapping diameter: M6 (front/rear tool holder) - Max. cutter diameter (tool spindle): 45 mm - Rotating guide bushing: 200 – 10,000 rpm (synchronously driven) - Tool spindle speed: 200 – 6,000 rpm - Total number of tools (standard specification): 31 - Tool size: 16 mm square x 100 mm - Rapid traverse: 32 m/min; rapid traverse in X1 and Y1: 24 m/min; in Y2: 24 m/min - Controllable axes: 6 The machine is equipped with a bar feeder from FMB, type: TURBO 3-36, as well as a chip conveyor. Note: The item must be collected between 04 and 12 March 2026 on a binding date to be agreed. FCA D-75181 Pforzheim – loaded onto truck

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 310163917, travel distance X-axis: 150 mm, travel distance Z-axis: 250 mm, total height: 2,200 mm, total length: 3,000 mm, total width: 2,000 mm, overall weight: 4,000 kg, controller manufacturer: MAZAK, controller model: MAZATROL 640 T, MAZAK SUPERQUICKTURN 100 M CNC Lathe - Operating voltage: 200 V - Frequency: 50/60 Hz - Rated current: 89 A - Connection: 17.8 kVA The machine is equipped with a tailstock and a 12-position tool turret, including driven tool stations. Note: The item must be collected definitively between 04 and 12 March 2026 on a date yet to be agreed. FCA D-75181 Pforzheim – loaded onto truck Gusdpfjx Hwguex Aftok

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 2SAY0351, turning length: 350 mm, turning diameter: 114 mm, spindle speed (max.): 8,000 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 320 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, torque: 30 Nm, total height: 2,100 mm, total length: 2,500 mm, total width: 2,000 mm, overall weight: 2,500 kg, turning diameter over bed slide: 325 mm, controller manufacturer: FANUC, controller model: SERIES 18i-TB, number of slots in tool magazine: 12, number of driven tool stations in tool turret 1: 6, EMCO MAXXTURN 25 CNC Lathe - Operating voltage: 3 x 400 V - Frequency: 50/60 Hz - Rated current: 26 A - Bar capacity: 25.4 mm - Centre distance: 445 mm Gujdpfjx Hwfqsx Aftsk - Spindle distance: 485 mm The machine is equipped with a tailstock, a main spindle, and a 12-position tool turret. It has six driven tools and a Y-axis. Note: The tool holders shown in the photos are not included! Important: The item must be collected on a binding date between 04 and 12 March 2026 (exact date to be coordinated). FCA D-75181 Pforzheim – loaded onto truck.

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: S2A130951, turning length: 350 mm, turning diameter: 114 mm, spindle speed (max.): 8,000 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 320 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, torque: 30 Nm, total height: 2,100 mm, total length: 2,500 mm, total width: 2,000 mm, overall weight: 2,500 kg, turning diameter over bed slide: 325 mm, controller manufacturer: FANUC, controller model: SERIES 18i-TB, number of slots in tool magazine: 12, number of driven tool stations in tool turret 1: 6, EMCO MAXXTURN 25 CNC Lathe - Operating voltage: 3 x 400 V - Frequency: 50/60 Hz - Rated current: 26 A - Bar capacity: 25.4 mm - Centre distance: 445 mm - Spindle distance: 485 mm The machine is equipped with a tailstock, a main spindle, and a 12-position tool turret. It has six driven tools and a Y-axis. Gsdpfx Afex Hwanjteuk Note: The tool holders shown in the photos are not included! Important: The item must be collected on a binding date between 04 and 12 March 2026 (exact date to be coordinated). FCA D-75181 Pforzheim – loaded onto truck.

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 183261, turning length: 470 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 120 mm, travel distance Z-axis: 300 mm, total height: 2,200 mm, total length: 3,000 mm, total width: 2,000 mm, overall weight: 2,200 kg, controller manufacturer: MAZAK, controller model: MAZATROL 640 T NEXUS, number of slots in tool magazine: 12, MAZAK QUICKTURN NEXUS 100 CNC lathe - Operating voltage: 400 V - Frequency: 50/60 Hz - Rated current: 31 A - Connection: 24 kVA The machine is equipped with a 12-position tool turret, a chip conveyor, a tailstock, and a main spindle. Attention: Supplied without the tool holders pictured! Note: The item must be collected between 04 and 12 March 2026 on a binding, to-be-agreed date. Gusdpfxsx Hv Hgs Aftjk FCA D-75181 Pforzheim – loaded onto truck

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 170618, turning length: 470 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 120 mm, travel distance Z-axis: 300 mm, total height: 2,400 mm, total length: 5,000 mm, total width: 2,000 mm, overall weight: 4,000 kg, controller manufacturer: MAZAK, controller model: MAZATROL 640 T NEXUS, number of slots in tool magazine: 12, MAZAK QUICKTURN NEXUS 100 CNC lathe Godox Hv Epopfx Aftouk - Operating voltage: 380 V - Frequency: 50/60 Hz - Rated current: 36 A The machine is equipped with a 12-station tool turret, chip conveyor, coolant tank, tailstock, main spindle, and a high-pressure pump. Note: The item must be collected definitively between 04 and 12 March 2026 on a date to be agreed. FCA D-75181 Pforzheim – loaded onto truck

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 219013, turning length: 409 mm, turning diameter: 280 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 187 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 33 m/min, rapid traverse Y-axis: 21 m/min, rapid traverse Z-axis: 33 m/min, torque: 162 Nm, total height: 2,500 mm, total length: 7,000 mm, total width: 2,000 mm, overall weight: 6,000 kg, controller manufacturer: MAZAK, controller model: MAZATROL MATRIX NEXUS, number of slots in tool magazine: 12, MAZAK QUICKTURN NEXUS 100 - II MSY CNC Lathe Gsdpfxsx Hv A Ie Aftouk Note: Technical specifications are provided without guarantee! - Operating voltage: 400 V - Frequency: 50/60 Hz - Rated current: 31 A - Connection load: 23.2 kVA - Equipped with sub-spindle, tool turret and main spindle, with driven tools - Main spindle chuck size: 6" - Sub-spindle chuck size: 5" - Tool shank height: 20 mm - Boring bar shank diameter: 32 mm - Max. speed for driven tools: 5000 rpm - Max. torque: 47 Nm The machine is equipped with a bar feeder from manufacturer LNS, a coolant tank, and a high-pressure pump. Attention: The item must be collected on a binding appointment between 04 and 12 March 2026 (exact date to be coordinated). FCA D-75181 Pforzheim – loaded onto truck.