Used Micro Screw Feeder for sale (9,870)

Year of construction: 1993, operating hours: 2,466 h, condition: good (used), machine/vehicle number: 330,2135,01, Brand: Leistritz AG Model: Micro 27/40 D Type screw: Double screw Year of construction: 1993 Screw Ø: 27 mm L/D Ratio: 40 Ijdsu Aqdkspfx Agzsbf Working hours: 2.466

Condition: used, Auger diameter: 35 cm Length: 385 cm Discharge opening: 45 cm x 33 cm Infeed width: 217 cm Infeed height: 175 cm Iedpfx Aexz R Rasgzjbf

Condition: good (used), functionality: fully functional, rotational speed (min.): 38 rpm, rotational speed (max.): 38 rpm, type of input current: three-phase, overall weight: 1,200 kg, total length: 5,000 mm, total width: 600 mm, Direct power transmission Total length: 4000mm Trough width: 500mm Ibsdpfeudk Sbox Agzsf Material of the conveyor screw: steel Drive motor: SEW-EURODRIVE Drive power 5.5kW Voltage: 400V Protection IP55 End bearings, Robust cast iron housing

Year of construction: 2022, condition: used, Used machine Year of manufacture: 2022 Screw compressor as stand-alone unit Isdpfx Aoxb Hfyogzebf Maximum pressure: 8 bar Effective delivery rate: 580 l/min Motor power: 4 kW Connection: 400 V Sound pressure level: 61 dB(A) Dimensions approx.: 580x480x760 mm Connection: 1/2" Weight approx.: 93 kg Availability: short-term Storage location: Flörsheim

Year of construction: 2016, condition: good (used), Hethon 61 Hopper and screw feed 2016, stainless, 100Kg hopper and outfeed screw, screw diameter 60mm, 3Ph, two in stock Ibjdpjw Dhdfofx Agzef

Condition: used, Vibratory bowl feeder / sorting device / bowl feeder / vibratory feeder RNA Vibratory bowl feeder, sorting device / screw feeder with vibratory feeder for screwdriving technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Ser.- No.: 03611 Year of construction: approx. 2000 Cup diameter bottom: 300 mm Pot diameter top: 350 mm Inner pot height: approx. 25 mm Sorting track width: approx. 30 mm Total height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 min-1 Mains connection: 230 Volt, 50 Hz - The conveyor was used for feeding automotive fuses Space requirement: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear conveyor / vibratory conveyor / sorting device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Ser. No. 00835 Year of construction: approx. 2000 Maximum rail length: 700 mm Usable weight: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 min-1 Mains connection: 220 Volt, 50 Hz - Swing plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Height with oscillating plate 145 mm Space requirement: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibratory drives, control unit, controller, control system for vibratory conveyors / sorting device / bowl feeder / vibrating bowl / vibratory feeder Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 Veff; (230VAC in motor operation) at 230V mains voltage 0 ... 98Vrms; (115VAC in motor mode) at 115V mains voltage Output voltage: 0...208 V (rms) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Circular conveyor, linear conveyor max. 10A adjustable Ibodpfxouzn Nns Agzjf Output 2: Circular conveyor, linear feeder max. 6 A adjustable Total load current: 16 Aeff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay DOWN: 0 ... 8 sec. Power output connection: Hirschmann 7 pol. - Two power outputs - Sensor amplifier with independently adjustable time stages (On / Off) - Soft start (internally adjustable) - External enable input 24VDC Space requirement: L x W x H: 260 x 190 x 140 mm Control unit weight: 3.6 kg All devices tested and in good condition

Condition: ready for operation (used), Powder feeder, screw conveyor, screw blender, used machine Dimensions: 855 x 720 x 810 mm Container size: 600 x 500 x 800 mm Electrical data: 230/400 V; 0.43 kW; 50/60 Hz The screw conveyor has a double bearing design and is equipped with a cover that opens due to the material flow. Ibjdpfx Agsw Tt S Eezof

Year of construction: 2003, condition: good (used), functionality: fully functional, screw diameter: 27 mm, TECHNICAL DETAILS Capacity: 10 – 40 kg/h Screw and Barrel Technology Design: Synchronous Screw center distance: 23 mm Screw diameter: 2 × Ø27.0 mm Kneading disc and kneading block diameter: 27.0 mm Screw material: 1.2379 Cylinder diameter: 27.2 H8 Cylinder material: 1.8550 nitrided, nitriding layer 0.5–0.6 mm Screw length: 40 D Screw torque: 2 × 100 Nm Screw speed: max. 500 rpm Drive Drive type: DC shunt motor Drive power: 10.5 kW Motor speed: max. 2,690 rpm Gear ratio: i = 5.38 Power transmission: Clutch Heating and cooling system Number of heating zones: 11 Heating capacity: 9.85 kW Number of cooling zones: 9 Cooling type: ZIK (Intensive Cylinder Cooling) Filling zone cooling: Water Filling zone cooling water consumption: 30 l/h Process parameters Melt pressure: max. 300 bar Melt temperature: max. 350 °C Injection height: 1,050 mm Dimensions and weight Weight: approx. 950 kg Ibodpev U Da Sofx Agzjf Length: 2,630 mm EQUIPMENT - Segmented screws and barrels - Synchronized technology - Degassing

Year of construction: 2014, condition: as good as new (ex-display), PSS SM 700 + PSS G 250 A ID.NO. 2336 Pss SM-700 liter paddle mixer model year 2014 with associated Pss G 250 A screw conveyor from 2016. Complete package in very good condition. Mixer dimensions D 230 W 125 cm H 235 cm. Giraffe D 140 W 125 cm H 250 cm. Ibedpfsifpl Iex Agzof

Condition: excellent (used), Year of construction: 2017, Böllhoff Uniquick Vario Screw Feeder UNIQUICK Feeder Type 360 Plastic sorting bowl, diameter 360 mm Quiet and surface-friendly conveying Optimal screw dimensioning depending on the material being conveyed (width and height) Integrated and controlled baffle High wear resistance Consistent conveying performance thanks to amplitude control In a sound-insulated housing on a frame Track width: 20 mm Connector head diameter up to 20 mm Connector length up to 55 mm Ibedpswbr N Hsfx Agzjf Filling volume: 3 l SIM BB-10-C (ws) Belt Hopper Bucket, chute: stainless steel Belt: white with FDA approval Filling volume: 10 liters Max. filling weight: 35 kg Drive: AC gear motor 230V / 50Hz Bunker with innovative drive to ensure a controlled, quiet, and gentle feed of screws and fasteners. UNIQUICK Multi Modularly expandable 3-way diverter Distributes the tested screws to three stationary screwdriving devices Separation Adapted discharge rail Precise guidance at the head Modular design Few format-dependent parts Component reproducibility Sensor monitoring Maintenance-free Sound insulation Screw conveying in a plastic bowl Lined with sound-insulating material Airtight blow-in of screws Compressed air maintenance unit Compressed air connection: 6 bar Power supply: 230 V AC Year of manufacture: 2017 Dimensions: HxWxD 1050 x 650 x 650 mm Technical specifications Find more items - new and used - in our shop! International shipping costs upon request!

Year of construction: 2016, condition: good (used), Hethon 51 Hopper and screw feed 2016, stainless, 50Kg hopper and outfeed screw, screw diameter 40mm, 3Ph, four in stock Ijdpfx Aew Dg Ucjgzjbf

Year of construction: 2018, condition: good (used), Hethon 71 Hopper and screw feed 2018, stainless, 100Kg hopper and outfeed screw, screw diameter 60mm, 3Ph, two in stock Ibodpfxsw Dg Ipj Agzef

Condition: used, Recirculating ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod, ball screw drive, linear bearing, precision ball screw -Manufacturer: Star, precision ball screw Iedpjfngxbsfx Agzjbf -Type: 1502-2-1085 -Shaft: Ø 24 mm -Thread length: 1495 mm -Dimensions: 1700/110/H70 mm -Weight: 10 kg

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control Ibsdpfx Asxf Up Ujgzjf - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Condition: excellent (used), Mitutoyo Frame Micrometer (28662) 103-155 OM-475, measuring range 450 - 475 mm Iodpfjw Suwgjx Agzobf

Condition: used, Feeding technology / feeding system / vibratory feeder / sorting unit / bowl feeder Vibratory bowl, sorting device / screw feeding with vibratory feeder for screwdriving applications Feeding system DEPRAG Type: 0622-P/0.75-1S No.: 1183884 Year: 2011 - 2012 The unit was used for feeding contact pins for electrical connectors. Product dimensions: Ø 4 mm, length 26 mm The pins are stocked in the material hopper; the conveyor belt transfers the pins as required into the bowl feeder. The bowl feeder, equipped with two sorting tracks, delivers the pins to the product turner. The product turner orients the product to the desired position and releases it for further processing. The unit comes from a prototype system. External electrical control is not included and should be provided by a PLC. Without modification, also suitable for automatic and correctly oriented feeding of threaded studs up to M4 x 26. The unit consists of the following components: 1 pc. belt hopper / feeding conveyor DEPRAG Type: B 10 Serial no.: 1178200 Order no: 415050A Year: 2011 Filling volume: 10 liters Belt speed: 100 mm/min Operating voltage: 24 Volt (DC) - Belt surface: profiled - Foldable stainless steel chute Weight: 11 kg 1 pc. bowl feeder vibratory bowl KENDRION Type: OA C006.504101 / OA C006029 / KQF 465 B5 Ijdpfxjh Ap Ido Agzjbf Bowl diameter top: 200 mm Bowl diameter bottom: 100 mm Bowl internal height: approx. 75 mm Sorting track width: approx. 5 to 8 mm - Bowl feeder with two sorting tracks and two product outlets Operating voltage: 230 Volt, 50 Hz. 1 pc. DEPRAG vibratory controller for the bowl feeder Type: SZG Controller 6 Production no.: 35 pcs. FESTO product turner with 180° swivel range - 1 FESTO valve terminal CPV10-GE-MP-8 - 1 FESTO valve terminal CPV10-VI - Special pneumatic components (compressed air supply approx. 6 bar) - 2 pcs. MURR base modules type MVP12 - Complete unit mounted on a steel plate with 4 support feet Dimensions L x W x H: 1150 x 520 x 860 mm Weight: 100 kg Very good condition

Condition: used, Feeding technology / Feeding system / Vibratory feeder / Sorting unit / Bowl feeder Vibratory bowl, sorting device / Screw feeding with vibratory feeder for screw technology Feeding system DEPRAG Type: 0611-P/0.75-1S No.: 1183885 Year: 2011 - 2012 The system was used for feeding electrical connector pins. Product dimensions: Ø 4 mm, length 39 mm The pins are preloaded in the material hopper; the feed belt conveys the pins as required into the bowl feeder. From the bowl feeder, the product is transferred via the linear feeder to the product inverter. The product inverter orients the product into the correct position and makes it available for further processing. The unit comes from a prototype system; the external electrical control unit is not present and should be replaced by a PLC. Without modification, for example, suitable for the automatic and properly oriented feeding of threaded pins up to M4 x 40. The unit consists of the following components: 1 piece belt hopper / feed conveyor DEPRAG Type: B 10 Serial no.: 1178201 Order no.: 415050A Year: 2011 Fill volume: 10 liters Belt speed: 100 mm/min. Ibjdekpwuuepfx Agzjf Operating voltage: 24 V (DC) - Belt surface dimpled - Foldable stainless steel chute Weight 11 kg 1 piece bowl feeder KENDRION Type: OA C006.504101 / OA C006029 / KQF 465 B5 Bowl diameter (top): 200 mm Bowl diameter (bottom): 100 mm Bowl internal height: approx. 75 mm Sorting track width: approx. 5 to 8 mm Operating voltage: 230 V, 50 Hz. 1 piece DEPRAG vibratory controller for the bowl feeder Type: SZG Controller 6 Serial no: 35 pieces linear feeder KENDRION Type: WS3B/36 Part no: WSB003,564025 Operating voltage: 230 V, 50 Hz. 1 piece DEPRAG vibratory controller for the linear feeder Type: SZG Controller 6 Serial no: 35 pieces product inverter FESTO with 180° swivel range - 1 piece FESTO valve block CPV10-VI 18200 - Compressed air requirement approx. 6 bar - 1 piece MURR base module type MVP12 - Complete unit mounted on a steel plate with 4 support legs Space requirements (L x W x H): 1150 x 520 x 860 mm Weight: 100 kg Very good condition

Condition: ready for operation (used), ZM CNC microfeeder 800 x 1 mm Ijdpfx Aex Imlvogzobf

Condition: ready for operation (used), Stainless steel tub Ibedsx Hyp Ejpfx Agzef Dimensions: 1900 x 890 x 200 mm

Condition: used, machine/vehicle number: SN: R050A-24E0011, I-PULSE F2 Feeder F2-44mm___1 piece F2-32mm___2 pieces F2-24mm___4 pieces F2-16mm___5 pieces Isdpfoww Etwsx Agzebf F2-12mm___6 pieces F2-84mm___39 pieces F2-82M_mm___6 pieces Feeder Stick____1 piece

Condition: good (used), Bookbinding screw press 50×40 on a base The device is fully functional, ready to work. Format 500×400 mm Ibjdpfx Ajwud Sasgzef Pressure 5t

Condition: excellent (used), Year of construction: 2020, Micro Vu Excel 502UC Optical Precision Measurement System Ibjdox Ag I Dopfx Agzsf Scale Resolution 0.1 µm. 'XY' Accuracy 2.8+L/200. 'Z' Accuracy 3.0+L/100. Zoom Ratio (Optical, Digital) 36x (12x, 3x). On-Screen Zoom Range 15x - 540x To 30x - 1080x. Capacity 500 x 400 x 250mm. With 4 Station Probe Rack, Calibration Sphere, Surround Guarding, Joystick Control, Monitor, Keyboard & Mouse. Machine Dimensions L1,200 x W1,100 x H1,650mm. Weight 900kg. S/No.EC502UC01461 (01/2020)

Condition: used, The Wahli-Stream Feeder TM 530 is a reliable feeder designed for efficient paper handling. Manufactured by Wahli, this model is located in Germany, with pricing available upon request. The machine supports an A2 format and is designed to enhance productivity in printing and finishing operations. Format: 360 420 mm Equipment: AUTOMATIC ENVELOPE FEEDER (with vacuum suction) Iedpfx Ajvphzpogzobf SUITABLE FOR PRESSES WITH STREAM / SINGLE SHEET FEEDERS ADJUSTABLE VACUUM, HEIGHT & SPEEDDELIVERY CONVEYOR MIN ENVELOPE SIZE: 7.6 x 12.7 CM MAX ENVELOPE SIZE: 36 x 42 CM

Condition: new, functionality: fully functional, Year of construction: 2025, • The Fabo Wobbler feeders are designed to feed sticky, wet and large materials comfortably and clean to the crusher with an ellipse-shaped bar and unique motion mechanism. With its self-cleaning structure, it eliminates the problem of obstruction and stone compression. • Work with wet and sticky materials without clogging and jamming. • Adjustable feed rate. • It occupies less space and has smaller height. • It works without dust, vibration and noise. • Low power consumption and maintenance frequency. • Width: 1400 mm • Length: 2500 mm • Motor power: 22 kW Ibjdpfxsx H Ifuo Agzof • Bar number: 5-9 • Elliptical bar shape • Aperture: 25-150 mm • Feeding size 50-1.500 mm • Chainy drive system • Max. Capacity 200-300 T / s • Capacities calculated according to the specified material density (1.6 tn/m3)

Condition: used, Year of construction: 2009, Manufacturer: H&G Model: HG/SV 11 Weight: 1800 kg Iodox Hyfyepfx Agzjbf Engine power: 11 kW