Used Maka Cnc for sale (46)

Condition: used, Year of construction: 2008, 5-Axis CNC Machining Center Used Machine Year of manufacture: 2008 Gkjdpfsx Enqzex Aftjf Condition: Currently still in production Equipment and Technical Data: CNC Control: Siemens 840 D Max. travel of controlled axes: X = 1800 mm Y = 6590 mm Z = 460 mm A = ±90 degrees C = ±270 degrees HSD milling unit with 10 kW, liquid-cooled Infinitely variable spindle speed up to 24,000 rpm Permanent grease lubrication Tool holder: HSK 63F 1 multi-spindle boring unit with pneumatic advance stroke, mounted to the milling unit 16 individually selectable vertical drilling spindles 1 horizontal twin drilling spindle in X-direction and 1 in Y-direction Drill holders: 10 mm diameter each Note: Workpieces that can be processed with the boring unit: 900 mm with X/Y reference spindle Milling unit and boring unit with extraction connections: 200 mm each, each with pneumatically operated shut-off valve, combined discharge for customer-side dust extraction system, diameter 300 mm Tool changer: 1 drum tool magazine for 5-axis milling unit, 20 positions for tool diameters up to 90 mm or max. 160 mm if sorted arrangement, max. tool length 160 mm One saw blade up to max. 300 mm diameter can be stored and exchanged, but will occupy 3 magazine positions Special tool lengths up to max. 180 mm possible with corresponding restriction of the working area. Max. tool weight: 6 kg (including HSK holder) Total weight in magazine: approx. 60 kg Magazine arranged at the aggregate exit position Machine table: 8 support rails, manually adjustable along the length of the machine, each with 1 retractable workpiece stop, fixed towards the operator Division of the table surface into two clamping zones, each station: - 1 length stop, pneumatically raisable and lowerable - 2 pneumatically raisable and lowerable slide rails - 1 vacuum clamping circuit Workpiece positioning: 1 Maka laser system Workpiece clamping: 1 vacuum pump 128 m³/h, dry-running, with 250-liter intermediate tank 16 vacuum suction cups, 110 mm diameter Suction cup set for stair manufacturing incl. touch valve 1 clamping device for posts/bends Incl. chip conveyor Incl. NC-Hops 5 WOP system Incl. bumper safety device at the front and fencing at the sides and rear Centralized lubrication Rated power: 21 kW Fuse: 63 A Availability: approx. March 2026 Location: Westerwald

Year of construction: 1999, condition: ready for operation (used), Main Drive Number of axis 5 Additional Equipment Gkedpfx Aox D Ebxoftof Energy Chains: Various models This 5-axis MAKA FPM 470 CNC Wood Machining Centre was manufactured in 1999. Ideal for complex woodworking projects, it offers precision and versatility. If you are looking to get high-quality milling capabilities, consider the MAKA FPM 470 machine we have for sale. Contact us for more information about this machine. Application Types CNC Wood Machining

Condition: excellent (used), Year of construction: 1995, still preserved CNC because little in use was used for door production , but can be used for any purpose . Double table, can be mounted from left and right side Gksdpjig T Epofx Aftsf 4 axes x 5000 mm y 1350 mm z 450 mm a 190° main spindle SK 40 8 kw water cooled up to 17 000 rpm chain magazine with 24 places

Year of construction: 2005, condition: ready for operation (used), A Maka CNC 4-axis milling and drilling machine for plastic, wood and aluminum is available. Travel X/Y/Z: 2000mm/6000mm/250mm, C-axis: 360°, rapid traverse X/Y/Z: 45m/min/45m/min/24m/min, spindle mount: HSK63, spindle power: 12kW, spindle speed: 24000rpm. Tool places: 12, angle head places: 3, machine dimensions X/Y/Z: 12000mm/5700mm/3200mm, control: BWO 920, documentation available. On-site inspection is possible. Gkedpfx Afsvmq Tvstof

Condition: excellent (used), Year of construction: 1995, upon request Gkjdefxgmgepfx Aftef

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 12100mm/2350mm/800mm, swivel A-axis: +/-98°, rapid traverse X/Y/Z/A: 45/45/24/10 m/min, processing length: 11000mm, speed: 24000 rpm, table: 10 support crossbars, 2 hydraulically swiveling workpiece stops, control: BWO 930, operating hours: 23792h, dimensions X/Y: 18300mm/6250mm. Including moving gantry version with Gentry drive on both sides, coolant spraying system with minimum quantity fine atomization. Documentation available. Godetqfqxopfx Aftskf

Condition: used, Surface planer type AH 430 - Year of manufacture: 1992 - 3 kW - 380 Volt - Control panel on top - Total table length: 2750 mm - Planing width: 430 mm - 4-knife cutterblock - Table adjustment via handwheel - Motor brake Gkodpfxsx Htb Is Aftsf - Extraction hood - Overall dimensions: 2800 x 600 mm

Condition: excellent (used), Catalogue number 7266 TECHNICAL DATA - Shaft width: 530mm - 4-knife shaft - Noise-reducing comb - Shaft guard - Table length: 2900mm - Longer infeed table: 1655mm - Cast iron tables - Both tables adjustable - Original adjustable cast iron fence - Brake - Extraction port diameter: 140mm - Motor: 4kW - Dimensions (L/W/H): 2900x1000x1210mm - Weight: 695kg ADVANTAGES – German-made – 4-knife shaft – Brake – Noise-reducing comb – Longer infeed table Gedporm Nfbofx Aftokf – Unpainted – Used jointer, in very good condition Original photos Start-up video of the machine: youtube.com/watch?v=v_3ECkLDWVI Net price: 18,900 PLN Net price: 4,500 EUR (depending on exchange rate 4.2 EUR) (Prices may change with greater fluctuations)

Condition: ready for operation (used), Year of construction: 2007, General Data Measurements width 3500 mm Measurements depth 6000 mm Measurements height 3400 mm Machine weight 7000 kg Main Drive Spindle speed range 24000 rpm Spindle motor power 10 kW Tool taper HSK 63F Number of axis 5 Movement X-Axis Movement 2900 mm Y-Axis Movement 1740 mm Z-Axis Movement 1050 mm Tools Max weight 3 kg Additional Equipment Gkodpex D Dlcofx Aftjf Maka protective enclosure, open at the top and with two manually opening doors at the front This 5-axis MAKA MK 7s was manufactured in 2007. It features a robust 7000 kg frame, operates on 400V/50Hz, and has a rated power of 18.5 kW. The machine includes a BWO 910 RC control system and a versatile HSK 63F milling spindle. Its linear tool magazine holds tools and saw blades, complemented by an aluminum surface table measuring 2000 x 1000 mm. Consider the opportunity to buy this MAKA MK 7s horizontal machining centre. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 1996, functionality: limited functionality, MAKA HC 57 R (Robot) CNC Machining Center 5-Axis Type HC-57 R / Machine No. 420 747 / Year of manufacture 1995 / Circuit diagram no. 320 177 The machine is operational and exceptionally robustly constructed (milling spindle, tool changer, vacuum pump, support, etc.) and equipped with existing electronics (control unit, circuit boards, transformer). It shows age-related wear in areas such as wiring, pneumatic lines, central lubrication lines, etc. It runs and is ready for operation, but due to the above-mentioned wear, it is being offered as a source of spare parts or for refurbishment. Gksdpfx Afox E Dp Tetsf Collection from 41334 Nettetal, workshop edge. Price negotiable. If no buyer is found for the assembled, complete machine, the machining center will be dismantled. The spare parts will then be offered individually. Interested parties in MAKA spare parts can contact us in advance regarding details or spare parts inquiries.

Condition: used, Year of construction: 1973, Storage location: Nattheim Gksdevvkt Uepfx Aftsf

Condition: used, Square Mortise Drill, 4-sided Mortiser Chain Mortiser, Tenon Mortise Machine MAKA (Max Mayer) TYPE ED 30 Serial No. 3130 Tenon width: 75 mm Throat depth: 0 to 75 mm (without wood plate) Hand lever stroke: approx. 125 mm Max. clamping width: 140 mm Chisel width: 8 mm Speed: 2800 rpm Motor power: 0.3 kW Power connection: 380 Volt, 50 Hz Gkjdpfx Ajxw Rbdjftef - Adjustable mortise stroke via eccentric shaft - Depth feed via hand lever - Mortiser adjustable up to 75 mm via threaded spindle - Quick-release lever for clamping device - Double column guide, robust design - Suitable for mortising rectangular holes for tenon joints Dimensions (L x W x H): 420 x 360 x 400 mm Net weight: 38 kg Very good condition

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Equipment and technical data: - Fixed milling spindle; newly fitted bearings - with table extension and extendable frame support 2500 mm - Motor 5.5 kW - Speeds 3000/4500/6000/8000/10000 rpm - Milling fence with 2 adjustment options: - complete fence - rear take-off jaws - Extraction hoods: 2 x 120 mm - Automatic motor brake - Right/left rotation Gkedpfxow I Uine Aftsf - with Haffner power feed with 4 rollers Weight approx. 700 kg Availability: by arrangement Location: Flörsheim

Condition: repair required (used), Year of construction: 2005, operating hours: 52,751 h, functionality: unexamined, travel distance X-axis: 975 mm, travel distance Y-axis: 9,100 mm, travel distance Z-axis: 575 mm, nominal power (apparent): 12 kVA, controller manufacturer: BWO, controller model: CNC 920, workpiece length (max.): 8,500 mm, workpiece width (max.): 450 mm, workpiece height (max.): 225 mm, rotational speed (min.): 1,000 rpm, rotational speed (max.): 20,000 rpm, overall weight: 16,600 kg, number of spindles: 1, number of slots in tool magazine: 32, input voltage: 400 V, type of input current: three-phase, continuous operating pressure: 6 bar, MAKA AP70 5-Axis Gkodpfx Afev Rlpyotef Year of manufacture: 2005 Weight of gantry including unit and tool changer approx. 15,000 kg Weight of control cabinet approx. 1,600 kg Operating voltage: 400 V / 50 Hz Operating pressure: 6 bar Compressed air consumption: approx. 2,000 l/h uncompressed Control type: BWO CNC 920 Controlled axes + max. travels approx. X - 975 / Y - 9100 / Z - 575 / A - +-270° / B - +-98° Milling motor: HSK 63F / 12 kW from 12,000 rpm, speed range: 1,000 - 20,000 rpm Lubrication: Permanent grease lubrication Tool holder: HSK 63 F Tool magazine: Chain magazine with 32 positions / 160 mm Machine table: 2 clamping stations with 6 support crossheads with clamping / pneumatic clamping devices Workpiece cube dimensions: X - max. 2x 3750 mm or 1x 8500 mm / Y - max. 450 mm / Z - max. 225 mm / A - +- 270° / B - +- 98° The machine is currently not operational. The spindle, including the conversion kit, must be replaced with newer software (available upon request from Maka). The machine can be inspected live in 94424 Arnstorf, Germany, by appointment. All information is provided without guarantee; sales to commercial customers only. Inspection and pickup by appointment in 94424 Arnstorf, Germany.

Condition: ready for operation (used), Year of construction: 1999, Two Maka Machines: Year: 1999 · Machine No: 422 799 Key specifications Model: MAKA KPF 334R Control: BWO 900C CNC (integrated PC, ~1 MB memory) Working area: X = 1,000 mm, Y = 1,000 mm, Z = 300 mm (fixture height ~120 mm) Godpfx Asxwux Teftekf A/B axes: A = 540°, B = ±100° (200° total) Rapid traverse: X/Y = 45 m/min, Z = 15 m/min, A/B = 10,000°/min Spindle: HSD high-speed spindle — 6.8 kW, 2,000–24,000 rpm, ceramic bearings, air-cooled (nominal power from 12,000 rpm) Tooling: SK30 spindle taper; 10-place drum tool magazine (tools up to Ø60 mm, length ≈130 mm depending on diameter) Table: Aluminium work table ~1,000 × 1,000 mm (T-slots / grid) Vacuum: Vacuum clamping system (vacuum pump spec commonly listed as ~54 m³/h on similar units) Lube: Central automatic lubrication system Electrical: 400 V, 50 Hz (verify on site) MAKA KPF 334 RT – 5-Axis CNC Machining Centre Year: 1999 · Machine No: 422 799 Key Specifications – MAKA KPF 334 RT Working travel: X ≈ 2,750 mm · Y ≈ 2,400 mm · Z ≈ 700 mm A-axis rotation: ~540° · B-axis swivel: ~200° Rapid traverse: X/Y ~40 m/min · Z ~15 m/min · A/B ~10,000°/min Dual work tables: ~1,000 × 1,000 mm each (coupleable) Control system: BWO 900 / BWO 900C CNC Spindle: High-speed milling spindle (eg ~27,000 rpm capacity) Tool magazine: Multi-station drum (tools up to Ø60 mm / L approx 130 mm, check actual) Vacuum clamping system & automatic central lubrication Electric: 400 V / 50 Hz (buyer to verify local connection)

Condition: used, Year of construction: 2000, Used machine MAKA CNC Door Processing Center HC 55 TBZ Year of manufacture: 2000 CNC machining center for processing interior doors (hardware mortising, vision panel cut-outs, peephole machining, etc.) CNC control BWO 900C, with 1 MB memory, integrated PC. Working ranges: For door width: 250 – 1,280 mm For door height: max. 2,500 mm For door leaf thickness: max. 80 mm Rapid traverse speed: X / Y-axis: 45 m/min Z-axis: 10 m/min 1 universal milling unit SK40 With integrated A-axis swivel 190° (+/- 95°), along X-axis for lock/hinge machining on both sides along the longitudinal door edge directly with the unit. Water-cooled milling spindle, nominal output 8 kW, available from 7,000 rpm, continuously variable speed from 1,000 – 17,100 rpm, SK40 tool holder for automatic tool change. Gsdev S Dn Depfx Aftokf 1 chain-type tool magazine with 24 positions, for tools up to Ø 90 mm, for sorted storage up to max. Ø 160 mm, positioned at unit’s service position. Max. tool length 200 mm from spindle mount. Milling spindle and 2 x magazine positions equipped for angle/feeler heads with torque support. Machine table with width adjustment via program, as well as width measurement for edge processing for consistent milling depth on both sides. 1 set of infeed rollers for manual loading, automatically elevating and lowering. 1 longitudinal stop with pneumatic insertion stroke, mounted on the traversing unit for positioning according to door length and thickness. 4 pneumatic lateral stops, swing-in type, for doors with veneer/cover overhang up to max. 15 mm, with selectable height adjustment for varying stop heights on finished doors (single/double rebate doors). 2 vacuum clamping lines, 5 vacuum suction cups per line, 130/200 x 70 mm, with touch valve and blow-off device. Per line, 3 vacuum cups can be lowered according to the door height being processed. 1 vacuum pump, approx. 128 m³/h suction capacity, with 250-liter intermediate tank, enabling rapid vacuum build-up. Automatic central lubrication, free-standing control cabinet with air conditioner. Safety features: Bumper on both sides of the gantry, protective fencing on the sides. Various tools and tool holders can be taken over by agreement. The machine can be inspected in Hermaringen.

Condition: used, Year of construction: 1992, with Centrofix cutterhead Used, good condition, low operating hours Manufacturer: Maka Model: AH 430 Year of manufacture: 1992 Machine no.: 9201531 GS-tested for wood dust Motor: 3.0 kW Control panel on top Planing width: approx. 430 mm Infeed table length: approx. 1500 mm Outfeed table length: approx. 1200 mm Pendulum guard Table lips slotted/low-noise Number of knives: 4 pcs Centrofix cutter block Table adjustment via handwheel automatic brake Extraction connection: D 140 mm Required space: approx. 2700 mm x 1200 mm x 1400 mm Gedsxuv Rrjpfx Aftjkf Weight: approx. 800 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery as is, as inspected, without any warranty or guarantee

Condition: good (used), Year of construction: 2000, Maka MM 7 T / 5 axes, year of manufacture 2000, Siemens 840 D control, X/Y/Z travel 2x1500/2000/600 mm, portal milling machine for light machining, milling spindle 7.5 kW, NC milling head, A axis 540°, B axis +/- 100°, 10-position tool changer, HSK F 63 holder, max. saw blade diameter 170 mm, spindle speed up to 24,000 rpm, X/Y axis rack and pinion, Z axis ball screw, vacuum table, aluminium flat table. Gkjdpfxjwuy Ahe Aftof

Year of construction: 1990, condition: good (used), I sell the door production machine MAKA, year 1990. Gedpfx Afogiwl Dotokf Combined oscillating mortiser and drilling machine. Available immediately

Condition: used, Year of construction: 1999, Dowel hole drilling device: Pitch 16, 22, 25, 32 Drilling depth: 145 mm Slot length: 240 mm Height adjustment range: 135 mm Motor power: 1.5 kW Godpfx Aev S Diusftskf Speed: 2800 rpm Extraction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 250 kg

Condition: used, Three-phase motor, electric motor, Maka milling motor -Power: 1.3 kW -Speed: 2800 rpm -Shaft: Ø 18 x 40 mm Gedpfxsdwhuqs Aftekf -Construction with: dovetail guide -Dimensions: 330/135/H195 mm -Weight: 15.7 kg

Condition: used, Feed unit MAKA -used- infinitely variable feed speed Gsdpfxeu R S R Uo Aftskf ----- Technical data ----- Rollers: 3 pieces

Condition: used, Year of construction: 1992, with Centrofix cutterhead infinitely variable feed 2 x outfeed rollers used, good condition, top equipment Make: Maka Type: DH 630 A Year of manufacture: 1992 Machine no.: 9201891 GS wood dust tested Motor: 6.7 kW Planing width: approx. 630 mm Planing height: approx. 300 mm 1 adjustable table roller Segmented pressure beam Gkodpfjxuv N Isx Aftof Segmented infeed roller 2 steel outfeed rollers Feed speed: 0-21 m/min, stepless Number of knives: 4 pcs Knife system: Centro-Fix reversible knives Digital display for planing height Electric height adjustment with manual fine adjustment handwheel Extraction port: Ø 150 mm Space requirement: approx. 1200 x 1200 x 1400 mm Weight: approx. 1000 kg Location: 97447 Gerolzhofen, loaded free of charge, unpacked Sale as is, as inspected, without warranty or guarantee

Condition: excellent (used), 4 kW motor Gedpfxjr Ddkae Aftjkf Saw with scoring saw Adjustment of the cutting angle Adjustment of the cutting angle Table length 150 cm

Condition: used, Year of construction: 1993, working width: 180 mm working height: 120 mm Gkodpfx Aspn Nypjftsf number of spindles: 4 Spindle configuration: unten, rechts, links, oben motor shaft spindle down: ca. 5,5 kW motor shaft spindle top: ca. 5,5 kW motor shaft spindle right: ca. 5,5 kW Motorleistung Welle left: ca. 5,5 kW adjustment shaft down: Kurbel adjustment shaft right: Kurbel adjustment shaft left: Kurbel adjustment shaft top: elektrisch cutter heads: Wendemesser feed speed: stufenlos feeder pressure: Feder power consuption: 20 kW motorbrake: - weight: