Park 3D Ewelina Jankowska

Condition: good (used), HP JET FUSION 540 MULTI-JET FUNCTION COLOUR 3D PRINTER Model: VCVRA-1804. Printing Technology: Multi Jet Fusion (MJF). Machine under power, after full check up by official producer service. Material: PA12 (polyamide). Build Volume: 332 × 190 × 248 mm. Print Speed: 0.08 mm. Resolution: 1200 dpi. Print Speed: Up to 1817 cm³/h. Printing Time (full bed): 14–20 h. Powder Recovery: Up to 80%. Power: 6300 W. Power Supply: 200–240 V, 50/60 Hz, 36 A. Dimensions: 1565 × 955 × 1505 mm. Weight: 650 kg (operating). Noise level: 72–80 dB. Connectivity: Ethernet (Gigabit). Files: 3MF, STL, OBJ, VRML v2. Software: HP SmartStream 3D Build Manager, Command Center. S/No: M2K86A Hfedpfx Afjx H Tl Hotor

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, overall weight: 601 kg, construction height: 406 mm, construction width: 355 mm, Submitting a bid obligates the bidder to collect the item by 14.01.2026! TECHNICAL DETAILS Build volume: 406 mm x 355 mm x 406 mm Layer thicknesses: 0.127 mm, 0.178 mm, 0.254 mm, 0.330 mm Volume cassettes for build and support material: 1,510 cm³ / 3,020 cm³ Achievable accuracy: ± 0.127 mm or ± 0.0015 mm/mm Z accuracy: −0.000 / +layer height MACHINE DETAILS System dimensions: 1,295 mm x 902 mm x 1,984 mm Weight: 601 kg Input voltage: 420 V Hodpox Hwgnsfx Aftjfr Supply voltage: 208 V AC Phases: 3 Frequency: 50/60 Hz Current consumption: 18 A Network connection: 10/100 Base-T Protocol: Ethernet Standards: CE, cTUVus, RCM, EAC, FCC Part B EQUIPMENT Insight™ Software Control Center™ Software GrabCAD Print compatibility SCA 1200HT support material cleaner Compatible with iSQUARED materials: ABS, ABS-ESD, ABS-CF, ASA, PC-ABS, PC, ULTEM 9085, ULTEM 1010 Note: One of four cassettes requires servicing.

Condition: like new (used), functionality: fully functional, machine/vehicle number: D362931, Year of construction: 2023, total length: 500 mm, total height: 400 mm, total width: 510 mm, overall weight: 80 kg, input voltage: 220 V, power: 0.3 kW (0.41 HP), The DWS UV Curing Unit XL is a professional large-format post-curing system, specifically recommended by the Italian manufacturer DWS for their SLA 3D printers. This XL curing unit is equipped with a high-performance UV light source to ensure consistent and reliable heat and light distribution. Thanks to its high precision and intensity, it can cure printed objects fully automatically in just a few minutes. In addition to the XL model, DWS also offers the S2 and M curing units, which differ in size and curing capacity. The DWS UV Curing Unit XL provides an impressive curing volume specifically matched to the build platform dimensions of the DWS XPRO Series printers. The unit is equipped with a timer that allows users to set the exact curing duration (up to 180 minutes). It also features user-friendly, intuitive controls and an ergonomic design. Safety is prioritized through features such as an intelligent door lock system and forced internal ventilation, enhancing operator comfort and security. Designed for professional SLA 3D printing workflows, the DWS UV Curing Unit XL serves as a crucial final step in the manufacturing process. It completes the secondary curing of models produced on DWS SLA printers. Even if models are perfectly shaped, they still require additional UV exposure for complete polymerization and structural stabilization. Post-curing improves not only the visual quality and smoothness of the model but, more importantly, its durability and resistance. Curing Volume The DWS UV Curing Unit XL offers a generous curing volume of 19.7 x 15.7 x 20 in (500 x 400 x 510 mm), which can accommodate the entire build platform of DWS printers like the XPRO S, XPRO SL, XPRO Q, and XPRO QL, including their HR versions. Hedpfsx Ehg Hsx Aftofr Controls The XL curing unit features straightforward and convenient controls for seamless operation. Activation is via a standard on/off button. An integrated 2.4” OLED display enables precise curing time setting—up to 180 minutes—ideal for processing large batches of SLA 3D printed components. Design The DWS UV Curing Unit XL features a sturdy white enclosure with two doors fitted with pink-tinted transparent windows. Its robust construction and ergonomic design make it suitable for a wide range of professional applications, such as prototyping, end-use part production, jewelry, digital dentistry, automotive, aerospace, and more. The device measures 30 x 27.8 x 31.8 in (761 x 705 x 806.5 mm) and has a weight of approximately 172 lbs (78 kg). Price The DWS UV Curing Unit XL is priced at $21,490.00, justified by its large curing volume, advanced features, and overall efficiency. Technical data summary: - Curing volume: 500 x 400 x 510 mm - Timer setting: 0 to 180 minutes - Internal ventilation: Forced ventilation - Display: 2.4” OLED - Inner dimensions: 670 x 660 x 590 mm - Manufacturer: DWS (Italy) - Safe door opening: Yes - Light source: UV LED - Outer dimensions: 761 x 705 x 806.5 mm - Power consumption: 300W - Power supply: 100–240V / 50–60 Hz - Weight: 78 kg

Condition: like new (used), functionality: fully functional, machine/vehicle number: D362931, Year of construction: 2023, total length: 265 mm, total height: 300 mm, total width: 330 mm, overall weight: 12 kg, input voltage: 220 V, power: 0.05 kW (0.07 HP), The DWS UV Curing Unit S2 is a professional post-curing solution specifically designed for SLA 3D printers, developed by the renowned Italian manufacturer, DWS. This S2 model is equipped with a high-efficiency UV light source, ensuring consistently even heat and light distribution for reliable, repeatable curing performance. Its robust UV intensity and precision allow for rapid, fully automated curing of printed objects within minutes. The DWS range also includes the M and XL curing units, which offer different curing chambers and capacities for various production needs. The S2 provides the most compact curing volume in the DWS lineup, ideal for single-part polymerization. It features a programmable timer (up to 30 minutes), enabling users to precisely control the curing cycle. Its intuitive controls, user-friendly interface, and compact footprint make it especially suitable for professional environments with limited space. The S2 also prioritizes user safety with practical features such as a secure automatic door lock and forced internal ventilation for heat management and operator protection. Purpose-built for professional SLA 3D printing workflows, the S2 serves as a crucial post-processing unit for models produced on DWS SLA printers. After initial printing, models require additional UV exposure for complete polymerization and structural stabilization. This secondary curing step not only enhances surface finish and smoothness but most importantly, ensures long-term durability and mechanical resistance. Hjdpfx Ajx Ehfpsftjfr Curing Volume: The S2 offers a chamber measuring 160 x 160 x 160 mm (6.3 x 6.3 x 6.3 in), optimized for single part curing and effective polymerization. Controls: Operation is straightforward with a standard on/off switch and an integrated timer allowing settings up to 30 minutes, sufficient for the majority of SLA post-curing applications. The unit features a robust, white exterior with a pink-tinted transparent door, combining an aesthetically pleasing design with ergonomic convenience. Its compact size and professional appearance make it well-suited for a range of industries, including prototyping, small-batch production, jewelry manufacturing, dental labs, automotive repairs, and aerospace applications. Technical Specifications: - Curing volume: 160 x 160 x 160 mm - Timer range: 0–30 minutes - Forced internal ventilation - Internal dimensions: 216 x 266 x 219 mm - Manufacturer: DWS, Italy - Safety door mechanism: Yes - Light source: UV LED - External dimensions: 265 x 300 x 330 mm - Power consumption: 50W - Power supply: 90–264V / 50–60Hz - Weight: 11.8 kg Price: The DWS UV Curing Unit S2 is priced at $1,990.00, reflecting its advanced curing capacity, professional feature set, and operational efficiency.

Condition: excellent (used), Stratasys Fortus 450mc Industrial 3D Printer + Krumm Tec CLEAN MATIC 3150 + Transformer – Complete System Description: The Stratasys Fortus 450mc is a high-end industrial 3D printer from the FDM (Fused Deposition Modeling) series. It is used worldwide in prototyping, small-batch production, mechanical engineering, the automotive industry, medical technology, and aerospace. For sale is a complete industrial 3D printing system consisting of: - Stratasys Fortus 450mc (3D Production System) - Krumm Tec CLEAN MATIC 3150 cleaning system for support material - Badger Magnetics 8 kVA transformer (suitable for EU power supply) The system comes from a professional environment and was used for the production of high-quality functional parts and prototypes. Key Features of the Fortus 450mc: - Industrial FDM 3D printer with large build volume: 406 × 355 × 406 mm - Capable of printing high-strength materials such as ABS-M30, PC, ASA, Nylon, ULTEM* - Exceptional dimensional accuracy and repeatability - Network capable, touchscreen interface, user-friendly operation - Ideal for prototyping, small series production, toolmaking, jigs and fixtures (*dependent on material licenses) Technical Data Fortus 450mc: - Voltage: 120/208 V, 3-phase (transformer for EU operation included) - Power consumption: 18 A - Dimensions approx.: 127 × 91 × 196 cm - Software version as per display: 6.2.6624.0 Krumm Tec CLEAN MATIC 3150: - Model: CM 3150 US/PS - 4 kW, 400 V, 50 Hz, 16 A - Ideal for removing SR-30 / SUP706 support material - Weight: 140 kg Total Weight approx.: 600–700 kg Important Note: "The table shown in the photos is not included in the scope of delivery." Scope of Delivery: - Stratasys Fortus 450mc - Krumm Tec CLEAN MATIC 3150 cleaning system Hjdpsx D Uqijfx Aftefr - Badger Magnetics 8 kVA transformer (Technical specifications are subject to change and errors excepted!) If you have further questions, we would be happy to answer them by phone.

Condition: ready for operation (used), Year of construction: 2015, General Data Measurements width 4200 mm Measurements depth 5900 mm Measurements height 3009 mm Machine weight 2240 kg Hedpex D Ev Aofx Aftofr This Concept Laser M2 cusing 3D Printer was manufactured in the year 2015. Application Types 3D Printing

Condition: ready for operation (used), Year of construction: 2021, This EVO-tech EL-102 V2 was manufactured in 2021. A plastic 3D printer featuring a robust 400 VAC system, it operates efficiently within a temperature range of 5–35 °C and humidity levels of 20–85% RH. It adheres to safety with IP41 protection and CE marking. Consider the opportunity to buy this EVO-tech EL-102 V2 plastic 3D printer. Contact us for more information. Application Types Hfodpfxex D Sicj Aftor 3D Printing

Condition: ready for operation (used), Year of construction: 2020, Additional Equipment Supplied with wash-out basin and oil basin to remove the support material This 3DSYSTEMS Projet 2500 Plus was manufactured in 2020. A reliable plastic 3D printer, it offers efficient performance for various printing needs. Consider the opportunity to buy this 3DSYSTEMS Projet 2500 Plus plastic 3D printer. Contact us for more information. Hfjdpfxex D Sipo After Application Types 3D Printing

Condition: ready for operation (used), Year of construction: 2023, operating hours: 211 h, General Data Measurements width 610 mm Measurements depth 650 mm Measurements height 1200 mm Additional Equipment Hjdpsx D Ehrefx Aftofr Inert Gas Control System: Yes This SINTERIT lisa x was manufactured in 2023. A compact and efficient plastic 3D printer, it offers advanced printing capabilities suitable for various applications. Ideal for small to medium-sized projects requiring precision and reliability. Consider the opportunity to buy this SINTERIT lisa x plastic 3D printer. Contact us for more information. Application Types 3D Printing

Condition: ready for operation (used), Year of construction: 2021, operating hours: 5,432 h, General Data Measurements width 940 mm Measurements depth 900 mm Measurements height 1950 mm Machine weight 350 kg Hedex D Sqmopfx Aftjfr Main Drive Number of axis 3 Additional Equipment Double extrusion head per print module, equipped with a cleaning system for the print head to print complex geometry with soluble support. 3 print modules with different temperature specifications specially developed for the different materials. This 3-axis 3DGence Industry F420 was manufactured in 2021, featuring Fused Filament Fabrication with a dual extrusion head and a cleaning system for complex geometries. It includes three print modules for various materials, a 380 × 380 × 420 mm working chamber, and temperatures up to 500°C for the print head. If you are looking to get high-quality 3D printing capabilities, consider the 3DGence Industry F420 machine we have for sale. Contact us for more information about this machine. Application Types 3D Printing

Condition: ready for operation (used), Year of construction: 2022, Main Drive Hfodpfx Ajx D N U Njftor Number of axis 3 Additional Equipment Material starter kit PA11 ESD BASF This XYZ PRINTING MfgPro230 xS 3D Printer machine was manufactured in the year 2022 in Taiwan. The machine disposes of a vacuum, accessories, powder separator and a Nitropur 800-POK Special air separator. Application Types 3D Printing

Condition: like new (used), functionality: fully functional, machine/vehicle number: BC120058, Year of construction: 2022, operating hours: 260 h, As-new 3D scanner, model VL500 from Keyence, available at a competitive price. The device is in perfect working condition and will be offered for sale at the end of March 2026. The ideal cost-effective solution for surface scanning of technical components. Resolution: 0.001 mm; repeatability: 0.002 mm; measurement accuracy: ±0.01 mm. Original purchase price was over €80,000. Hfsdsx Dy Iaepfx Aftor

Condition: good (used), Stratasys Objet Model: Objet350 Connex3 + SUT70 USFL SOLO + WATER JET Technical Specifications: Build Volume: 342 × 342 × 200 mm Layer Thickness: 0.016 / 0.030 mm Resolution: X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 1600 dpi Dimensions and Weight: 1400 × 1260 × 1100 mm; 430 kg Cleaning Station SUT70 approx. 580 x 605 x 800 mm, 70 kg Materials: Rigid and opaque: VeroPureWhite™, VeroWhitePlus™, VeroBlackPlus™, VeroGray™, VeroBlue™, VeroCyan™, VeroMagenta™, VeroYellow™ Elastomeric: Agilus30™, TangoPlus™, TangoBlackPlus™, TangoBlack™, TangoGray™ Transparent: VeroClear™ and RGD720 Polypropylene-like materials: Rigur™ and Durus™ Temperature-resistant & biocompatible SHR print head system PolyLog material management system Incl. digital color options (more than 500,000) GrabCAD Print software Incl. OBJET 350 Connex3 support package Condition: used Last inspection 2024! Scope of delivery: (see photo) Hfjdpfxox A S Ate Aftsr (Specifications and data subject to change and errors excepted!) If you have any further questions, please feel free to contact us by phone.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2022, operating hours: 1,500 h, warranty duration: 3 months, 3DGence Industry F350 High-Temp 3D printer in fully operational condition Compatible materials: PEEK, PEKK, Ultem, PC, PEEK-CF etc. Hsdpfxex Avbte Aftofr 3D printer including original accessories (3x extruder modules) Includes approximately 3 months of remaining warranty Inspection possible at any time!

Condition: used, functionality: fully functional, machine/vehicle number: S/N 1710S902, Year of construction: 2017, total length: 1,800 mm, total height: 1,520 mm, total width: 1,050 mm, 60kg of Extrudr Greentec Pro filament 2.85mm is included. Hsdpfx Afjx Atytjtsfr

Condition: excellent (used), SLM Solutions Model: SLM 280 HL For sale is a professional metal 3D printer SLM 280 HL by SLM Solutions (Lübeck). The machine comes from industrial use, is fully documented, and is delivered including nameplate data and technical documentation. The SLM 280 HL is designed for 24/7 operation and is suitable for aluminum, stainless steel, tool steel, cobalt-chromium, and many other metal powder materials. Hedpfx Aox Agt Hjftjfr Included modules and accessories: - AMC 330 WB Air Management/Filter Module - HRS050-AF-20-M Chiller Unit - DC 1.5 KAESER Compressor / Compressed Air Module Technical Data (Excerpt) Machine Weight: 1,245 kg Dimensions (without accessories): Width: 1.7 m Height: 2.0 m Depth: 1.1 m Build volume: 280 × 280 × 250 mm (optional depth 350 mm) Electrical connection: Power consumption: 15 A Building-side protection: 32 A Control voltage: 24 V DC Heating power: 1,200 W Protection class: IP50 Power input: 4.7 kW (single optics) / 8.0 kW (twin optics) Media supply Argon Operating pressure: 6 bar Flow rate (purge): approx. 130 l/min Flow rate (build process): approx. 3 l/min Quality: DIN EN ISO 14175 – Class 4.6 (≥99.996 %) Compressed air Operating pressure: 6 bar Flow rate: without nitrogen generator: approx. 100 l/min with nitrogen generator: approx. 500 l/min Quality: ISO 8573-1:2010 Class 1:4:1 Cooling water Medium: distilled water Primary circuit: Pressure: 4 bar Flow rate: 0.3 l/min Supply temperature: 18–20 °C Secondary circuit: Min. pressure: 2 bar Max. temperature: 40 °C Volume: 1.7 m³/h pH value: 5.8–7.0 Operating conditions Ambient temperature: 20–25 °C Max. relative humidity: 60 % Designed for continuous (24 h) operation (Weight approx. 1,245 kg). Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of supply: (see picture) - SLM 280 HL machine - Control cabinet - Process chamber - Internal control panel with screen - Available documentation, parts lists, manuals (Subject to changes and errors in the technical data!) We will be happy to answer any further questions by phone.

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 720 h, total length: 700 mm, total height: 1,000 mm, total width: 760 mm, type of input current: AC, overall weight: 110 kg, input voltage: 230 V, The printer is in good optical and functional condition and ready for demonstration. The printer can process not only PLA, PETG, ASA, PA, etc., but also fiber-reinforced filaments (1.75mm). The IDEX printer is equipped with 2x 0.4 mm nozzles and can be accessed via WiFi, LAN, and USB. Hodpsxz N Rfjfx Aftefr The printer is fitted with Klipper and can process models generated by the MINGDA-ORCASLICER. Due to over 700 operating hours, the 400x400x400 mm printer is being sold as a spare parts donor only, without any guarantee, even though it is in working condition. Viewing and test printing on site are welcome. The printer must be picked up in person in Genthin (39307) and is offered without packaging. Please refer to the relevant online resources for further technical data regarding this model. Packaging and transport must be organized by the buyer. Collection in person only!

Condition: like new (used), functionality: fully functional, Year of construction: 2014, total length: 1,100 mm, total height: 1,510 mm, total width: 850 mm, overall weight: 160 kg, We are offering an unpacking and sieving station as well as an unused drum mixing station from EOS GmbH. This mixing station is ideally designed for use in combination with wide-neck drums. It enables the efficient blending of sieved used powder with virgin powder over a defined period. The prepared powder mix can then be used in EOS Formiga P100 or P110 systems. The unpacking and preparation station consists of: • an unpacking area • a sieving unit for used powder • a feed for virgin powder • and a scale for the preparation of plastic powder. After removal from the machine, the cooled exchange frame is inserted into the unpacking and preparation station. By gradually raising the build platform using a foot pedal, the powder bed with components is pushed out of the exchange frame. The sintered parts are manually unpacked from the powder bed. Reusable used powder from the powder bed is pushed onto the adjacent perforated plate and falls through a hose into a sieve bowl. The used powder is sieved into a powder container placed on a scale beneath the sieving unit. The scale enables precise measurement of the quantity of recycled powder. Then, by turning the hand crank, a pre-determined quantity of virgin powder is fed into the powder container with the recycled powder. Hsdpfxoxzpw Sj Aftefr The prepared plastic powder then needs to be mixed in the mixing station before it can be used again in the build process. Mixing station We are offering an unused drum mixing station from EOS GmbH. In the mixing station, virgin and recycled powder, filled into powder containers by the unpacking and preparation station, are mixed. A powder container is rolled or placed onto the mixing station and then rotated continuously for a pre-set period. After the time has elapsed, the mixing station stops and the powder container can be removed.

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 200 h, total length: 406 mm, total height: 1,117 mm, total width: 406 mm, type of input current: AC, overall weight: 52 kg, input voltage: 220 V, input current: 5 A, input frequency: 50 Hz, positioning accuracy: 0.093 mm, feed length X-axis: 180 mm, feed length Y-axis: 101 mm, feed length Z-axis: 330 mm, EnvisionTEC Envision One cDLM XL – High-Precision 3D Printer (Demonstration Unit, Like New) For sale is an EnvisionTEC Envision One cDLM XL 3D printer—a professional high-end system for precise and rapid production of prototypes, functional parts, dental models, and small series. Condition: - Demonstration unit, very lightly used - Technically and visually like new - Clean, well-maintained, and ready for immediate use Technical Data: - Model: Envision One cDLM XL - Technology: Continuous Digital Light Manufacturing (cDLM) / DLP - Build Volume: 180 × 101 × 330 mm (X × Y × Z) - Native XY Resolution: 93 μm - Enhanced XY Resolution: up to approx. 60 μm - Layer Thickness: approx. 25 – 150 μm (depending on material) - Print Speed: up to approx. 45 mm/h - Light Source: High-performance DLP projector, 385 nm UV LED - Z-Axis: Dual linear guideway for high precision - Power Supply: 110/220 V, 50/60 Hz, 5 A - File Formats/Software: STL, Envision One RP Software External Dimensions & Weight: - Device dimensions: approx. 406 × 406 × 1,118 mm - Weight: approx. 52 kg Advantages: - Very high level of detail and outstanding surface quality - Ideal for dental, product design, industry, prototyping, and small batch production - Fast print times thanks to cDLM technology - Large build volume for a desktop SLA/DLP system - Robust, precise, and suitable for industrial use Note: Perfect for companies, laboratories, and workshops looking for a reliable, professional, and almost new device. Hsdpfxoxzdp As Aftefr Inspection possible.

Condition: used, Year of construction: 2013, Total of 12 AMS 03D conveyor systems are available (vintage 2013 and 2014). Hfedpfjxy Scnsx Aftjr Ask for additional information!

Condition: like new (used), functionality: fully functional, machine/vehicle number: D362625, Year of construction: 2023, DWS DW 029XC – Professional 3D Printer – SN D362625 – As New Condition Installation Year: May 1, 2023 List Price: €95,000 Availability: Immediate Origin: DWS showroom, only used for demonstrations Condition: As new The DWS DW 029XC is in impeccable condition, coming directly from a showroom and used exclusively for demonstration purposes. The machine is perfect, fully operational, and available for any test or inspection in Turin. Clearance sale price. Technical Specifications Hfsdpfx Asxyuv Dsfter • Technology: Laser stereolithography • Laser source: Latest-generation high-stability blue laser • X/Y axis resolution: 20 microns • Z axis resolution: up to 1 micron depending on resin • Build area: 90 x 90 x 90 mm • Layer thickness: from 10 to 50 microns • Production speed: Very high due to the high-precision laser • Motion system: Digitally controlled build platform • Compatible materials: All DWS industrial and dental resin series, including castable, rigid, flexible, transparent, and technical materials • Resin loading: DWS cartridges with automatic management • Software included: Nauta Plus and Fictor • Connectivity: USB and Ethernet • Calibration system: Fast automatic calibration • Power consumption: Optimized for continuous professional use • Weight: approx. 45 kg • Power supply: 110/230 V Key Features • Micrometric precision • Ideal for jewelry, dental, fashion, and technical prototyping • Excellent surface quality • Professional-grade reliability • Compact, quiet, and simple to use • Certified showroom origin Sale Price Very advantageous price for clearance. Photos, videos, and full documentation available upon request. The machine can be inspected at any time in Turin.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: NR103-2019, Year of construction: 2019, total length: 3,000 mm, total height: 2,600 mm, total width: 2,200 mm, overall weight: 2,500 kg, Demonstration machine from the Massivit showroom. Purchased on December 21, 2023. - List price (new): €399,000 - Used sale price: €150,000 - Sold with 228 kg of Dimengel (value: €11,172). The machine is in very good condition and has seen minimal use. Hsdpfx Afoxyqucotjfr

Condition: refurbished (used), functionality: fully functional, Year of construction: 2019, total length: 1,450 mm, total height: 1,800 mm, total width: 1,100 mm, type of input current: three-phase, overall weight: 3,000 kg, warranty duration: 12 months, table width: 1,450 mm, tank capacity: 19 l, table length: 1,100 mm, workpiece weight (max.): 150 kg, Description: The Massivit 1800 Pro is a large-format 3D printer engineered for companies that need to produce full-scale parts quickly and reliably. It is widely used in visual communication, automotive, marine, architecture, industrial prototyping, scenic construction, and composite mold fabrication. Equipped with two independent printheads, the system can manufacture two objects simultaneously or combine different print resolutions within a single job. Its generous 145 × 111 × 180 cm build volume allows the creation of tall, lightweight structures in a fraction of the time required by traditional additive technologies. Thanks to Massivit’s GDP (Gel Dispensing Printing) process, the machine prints complex geometries, large hollow volumes, overhangs and non-vertical walls without support structures, significantly reducing material consumption and post-processing. The printer is compatible with a wide range of Massivit-certified materials, including: • Dimengel 90 – general-purpose, cost-effective • Dimengel 100 – high-strength translucent material • Dimengel 300 Transparent – clear gel for optical or light-diffusion parts This unit has been fully refurbished by Futura3D B.V., with long-standing experience on Massivit systems, and restored using original-spec components. The printer is ready for immediate production. Machine Condition: • Fully refurbished by Futura3D B.V.with long-standing experience on Massivit systems • Dispensers fully rebuilt (new stators, bearings, couplings with all original components) • Pump and hydraulic system cleaned and serviced • UV modules tested and calibrated • Complete mechanical alignment performed (XYZ, SZ, table, material calibration) • Functionally tested and ready to print Machine viewable in Fleurus, Hainaut, Belgium, by appointment What’s Included: crate - Reinforced international-grade wooden shipping crate (included) installation - On-site installation and 1-week operator training Support - 1 year of technical assistance & remote support Possibility to print samples or perform an in-person demo with your files (appointment required) Key Specifications & Highlights: Large-format build area: 145 × 111 × 180 cm Dual independent print heads for higher throughput High-speed UV-curing gel deposition (up to ~300 mm/s) Hjdpfx Afjxx S Distofr Support-less printing of complex shapes and overhangs Multiple print modes (Normal, Quality, High-Resolution, Mega-Quality, Variable Resolution) Remote monitoring, onboard cameras, and real-time head-tip view Ideal for full-scale prototypes, molds, displays, sculptural pieces, and industrial components. Incoterms & Logistics: Incoterm: FCA Brussels (Belgium) Machine professionally dismantled, packed in reinforced wooden crate (~3000 kg), and made available for carrier pickup. Transport, insurance, customs clearance and international shipping are arranged by the buyer.

Condition: excellent (used), Eos EOS P 396 | PSW 3.8 – Industrial 3D Printer (Laser Sintering System, SLS, CO₂ Laser) The machine has been serviced regularly (last service: 08/2024). It has exclusively processed PA11 (EOS PA1101). The system is offered including accessories: 1 x build box, docking station, multibox with cooler Operating hours: 5,962.3 h "The printer has been equipped with a new IntelliScan III scanner including a laser deflection head and has been thoroughly inspected." For sale is an EOS P 396 with PSW 3.8, a high-precision industrial system for additive manufacturing (Selective Laser Sintering, SLS). The system is suitable for the production of complex plastic components for both series and prototype manufacturing. Base machine with control cabinet & control terminal Exchangeable frame with build platform Blade cassette II (blue) Software: Windows 7 Hsdpfxsxw Uyqs Aftefr Process software (PSW) EOSTATE Basic Parameter set: PA 2200 Balance Cooling system (termotek): Cooling capacity: 1,400 W at 20°C water / 18°C process water Pump capacity: 5 l/min at 3.5 bar Electrical power: 230 V, 50/60 Hz, 7.5 A Refrigerant: R134a (max. charge: 420 g) Multibox is a typical EOS accessory for powder handling, used for transporting and interim storage of material. Technical Data: Laser and Optics: Laser type: CO₂ laser Rated power: 70 W Wavelength: 10.55 – 10.63 μm Laser safety class: 1 (closed) / 4 (open) Focused beam diameter: approx. 0.6 mm Heated F-theta lens, focal length: 500 mm High-speed galvanometer scanner with temperature compensation Exposure area: 350 × 350 mm Beam deflection speed: max. 6 m/s Mechanics & Build Volume: Build chamber: 350 × 350 × 620 mm X-axis (coater): Travel 690 mm, speed max. 200 mm/s Z-axis (build platform): Travel 650 mm, speed max. 6 mm/s, resolution 0.01 mm Powder dosing via grooved roller Heating Systems: Process chamber heating: 3.0 kW, infrared twin tube radiator with pyrometer control Take-off chamber heating: 1.6 kW, resistance heater coil with separate temperature measurement Control & Operation: Process computer with Windows 7 OS 15.1" TFT display, membrane keypad & mouse Ethernet network connection Other: Noise emission: < 70 dB(A) Electrical Data: Voltage: 400 V 3~/N/PE Frequency: 50 / 60 Hz Rated power: 10 kW Rated short-circuit current: 5 kA Current draw (full load): 16.0 A Line protection: 32 A Total weight: approx. 1,400 kg Condition: used Scope of delivery: (see picture) Base machine with control cabinet & control terminal Exchangeable frame with build platform Blade cassette II (blue) Software: Windows 7 Process software (PSW) EOSTATE Basic Parameter set PA 2200 Balance Cooling system (termotek) Multibox (Specifications and information are subject to change and correction!) For further questions, please feel free to contact us by phone.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2021, The Massivit 5000 3D printer enables ultra-fast custom manufacturing for both the visual communication market and industrial sectors such as the automotive, aerospace, railway, and marine industries. Equipped with a dual-material system and two printheads, the M5000 allows you not only to print two different objects but also to print with two different materials simultaneously. The extraordinary build volume of 145 x 111 x 180 cm enables the production of full-scale parts in no time. Large, complex forms are no challenge for this machine. Hfodpfx Afsxwpvgeter Furthermore, a variety of materials is available for the machine.